R/O Chowkidar Hut at Orchard in Ward No. 16

Amount

Providing and laying cement concrete work M-20 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing shelves and their supports balconies, beams, girders, bressumers and cantilevers upto floor two level as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering, shuttering, strutting and propping etc. With wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mm and removal of the same for in situ-reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, cantilevers, bressumers and lintels not exceeding 1mtr in depth in all heights from floor as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D of Tata Tiscon / Sail for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Structural steel of Tata / Sail work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing 6 mm thick. plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ sail/ Reliance/ Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing pre-painted steel sheet ridges having proper Gola shape or hips of TATA Durashine/ Sail/ Reliance/ Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetre) diametre high pressure P.V.C spigot and socket Rain water pipe of Supreme/Finolex/Vectus /Relpipe (reliance) working pressure not less than 6 kg/cm2 ( Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government 110 mm bend as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge

desh raj