Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.1 LAccepted-AOC | L1 | Accepted-AOC L1 agreement executed | |
| 2 | L2₹6.7 L+₹65,891.64 (10.8%)Rejected-Finance | L2 | Rejected-Finance L1 agreement executed | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | HARIKUMAR L2 | BINU PILOT S L3 | S SAJEEV L1 |
|---|---|---|---|---|---|---|
| 1.00Appendix 1 | ||||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,321.32 | kg | 174.76 ₹4,05,673.88 | 198.59 ₹4,60,990.94 | 157.68 ₹3,66,025.74 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 123.84 | sqm | 757.56 ₹93,816.23 | 860.86 ₹1,06,608.9 | 683.52 ₹84,647.12 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 176.4 | sqm | 148.3 ₹26,160.12 | 168.52 ₹29,726.93 | 133.8 ₹23,602.32 Lowest |
| 1.00 | OD81702/2025-2026:
Providing and fixing 3mm thick Aluminium Composit Panel with minimum thickness of Aluminium layer on both sides 0.25mm (ALU DECOR / ALSTRONG / EUROBOND / ALSTONE / VIRGO / equivalent) fixed with CP Brass/steel screws and jointed with Silicon in the joints and for covering the screws for false ceiling/panelling in doors and windows/cupboards/partitions etc. including all materials, labour charges, hire charges etc. complete as per the direction of Engineer in charge | 96 | sqm | 1,359.95 ₹1,30,555.2 | 1,545.4 ₹1,48,358.4 | 1,227.05 ₹1,17,796.8 Lowest |
| 1.00 | OD167897/2024-2025:Blacksmith 1st class engaging maintenance and changing fittings of grill doors , windows and gates | 7 | each | 1,183 ₹8,281 | 1,344.62 ₹9,412.34 | 1,067.63 ₹7,473.41 Lowest |
| 1.01 | OD167898/2024-2025:Engaging coolie for non skill works like cleaning, assisting etc | 10 | each | 973.4 ₹9,734 | 1,106.22 ₹11,062.2 | 878.34 ₹8,783.4 Lowest |
Tender Value
₹7.7 L
EMD Value
₹19,154
Closing Date
17 Feb 2026, 11:00 amClosed
Asst Exe Engineer Medical College Sub division TV
Asst Exe Engineer Medical College Sub division TVM
civil works
2026_PWD_835562_1
PWD/BLDG/TR/19692/2024_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
240 days
Medical College TVPM
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,690
Yes
₹19,154
Yes
6 Jun 2026
11 Feb 2026
19 Feb 2026
11 Feb 2026
17 Feb 2026
11 Feb 2026
Appendix 1
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD81702/2025-2026: Providing and fixing 3mm thick Aluminium Composit Panel with minimum thickness of Aluminium layer on both sides 0.25mm (ALU DECOR / ALSTRONG / EUROBOND / ALSTONE / VIRGO / equivalent) fixed with CP Brass/steel screws and jointed with Silicon in the joints and for covering the screws for false ceiling/panelling in doors and windows/cupboards/partitions etc. including all materials, labour charges, hire charges etc. complete as per the direction of Engineer in charge
OD167897/2024-2025:Blacksmith 1st class engaging maintenance and changing fittings of grill doors , windows and gates
OD167898/2024-2025:Engaging coolie for non skill works like cleaning, assisting etc
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1405897.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
epaymentform.pdf
Tender Documents • 0.06 MB
SBD.pdf
Tender Documents • 1.64 MB
BOQ_1405897.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .