Panchayat Ghar

Name of Work :-

Constructing of Panchayat Ghar at Various Villages Of Anand Taluka Pkg no

AND/PANCHAYATGHAR/2026-27/02

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item

(with brief specification and reference to Quantity Unit Amount

No book of specifications)

1 Excavation for foundation upto 1.5 m depth including sorting 135.300 Cum 212.52

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 Providing and laying cement concrete 1:4:8 (1 cement : 4 35.800 Cum 2945.16

coarse sand : 8 B.T. machine crushed stone aggregates 40 mm

nominal size) and curing etc. complete excluding cost of form

work in foundation and plinth.

3 Brick work using common burnt clay building bricks having 19.900 Cum 4245.09

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

4 Filling available excavated earth (excluding rock) in 72.800 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

5 Filling in foundation and plinth with murrum or selected soil in 109.100 Cum 294.38

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete. (upto 10 ton)

6 Providing and laying ordinary cement concrete 1:1½:3 (M- 35.300 Cum 4500.62

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in (A) Foundations,

footings, base of columns and mass concrete

7 Providing and laying ordinary cement concrete 1:1½:3 (M- 18.660 Cum 7864.12

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Columns for all floor

8 Providing and laying ordinary cement concrete 1:1½:3 (M- 27.400 Cum 4409.17

200) using B.T. stone aggregate & curing complete including

the cost of form work but excluding the cost of reinforcement

for R.C.C. work in Ground Beam.

9 Carring out plinth treatment to post construction / existing 212.400 Sqm 124.35

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

10 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 27.000 Cum 3757.61

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth

11 Brick work using common burnt clay building bricks having 78.440 Cum 4526.81

crushing strength not less than 35 kg/Sq.Cm. in superstructure

above plinth level upto floor two level in Cement Mortar 1:5.

(1- Cement : 5 -fine sand) (B) Conventional brick etc. complete

12 Brick work using common burnt clay building bricks having 76.020 Cum 4569.24

crushing strength not less than 35 kg/Sq.Cm. in superstructure

above plinth level above floor two level in Cement Mortar 1:5.

(1- Cement : 5 -fine sand) (B) Conventional brick etc. complete

13 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 11.300 Cum 3270.55

coarse sand : 6- B.T. machine crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of formwork

in (A) Foundation and Plinth

14 Providing and laying ordinary cement concrete 1:1½:3 (M- 15.140 Cum 7032.82

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Lintels for all floor

15 Providing and laying ordinary cement concrete 1:1½:3 (M- 21.300 Cum 6180.18

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Beams for all floor

16 Providing and laying ordinary cement concrete 1:1½:3 (M- 47.340 Cum 6565.97

200) using B.T. stone aggregate and curing of concrete

complete, including the cost of form work but excluding the

cost of reinforcement for R.C.C. work in Slab for all floor level.

17 Providing and laying controlled cement concrete M-200 and 5.000 Cum 8310.85

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

STAIR CASES for All floor

18 Providing TMT Bar FE 500D reinforcement for R.C.C. work 15485.400 Kg 77.29

including bending, binding and placing in position complete

upto floor two level

19 Providing and fixing 18 mm thick mirror polished Granite 155.850 Sqm 2202.08

stone of machine cut & full round edge and polished of

approved quality in cladding on sill and around the Doors /

windows / ventilation with 20 mm thick cement plaster 1:3

and jointed with white / matching pigment cement slurry &

adhesive, including polishing & moulding of exposed edges etc.

complete for all floor level as directed by Engineer-in-charge.

20 Providing 15mm thick cement plaster in single coat on Rough 635.200 Sqm 254.40

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing with

a floating coat of neat cement slurry for Ground Floor

21 Providing 15mm thick cement plaster in single coat on Rough 321.500 Sqm 283.15

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing with

a floating coat of neat cement slurry for First Floor

22 Constructing a Sandwich type cooking platform of 60 cm width 1.950 Sqm 5443.07

and 70 cm height resting with Granite polished stone top and

100 mm height faces in exposed faces with 18 mm thick of

polished Granite stone of approved colour and quality on

mm x 2 No polished Kota stone sandwich supports, polished

kota stone shelves and fixing stone using cement mortar 1:2 (1

cement : 2 fine sand) for sandwich and fitting at bottom &

edges with water proof rigid adhesives, including mocking

necessary grooves in walls, polishing and making edges etc.

complete as directed by Engineer-in-charge. (Only top clear

area of platform shall be measured and paid for)

23 Providing and fixing Kitchen Platform shutter using Indian 2.560 Sqm 5546.81

teak wood frame work 50 x 25 mm size (equally provided ply

patty on top & bottom) with 19 mm thick (all proof - IS: 710)

plywood in shutter with both side covered with 1.0 mm thick

laminated sheet and teak wood batten with S.S. 304 grade

hinges, handles, magnet, S.S. Baskets for storage (one side gas

cylinder cup board), Telescopic Chanel of minimum 450 mm

length for drawers and necessary S.S. fixture and fastening,

edge polishing to wood work by melamine polish etc. complete

as directed by Engineer-in-charge.

24 Providing and fixing Stainless steel kitchen sink Glossy ASIS 1.000 No 1173.78

304 grade and 1 mm thick with over all size 510 x 432 x 33 and

bowl size 455 x 368 x 190 mm of approved brand as directed

by Engineer-in-charge with all fittings like C.I. or M.S. brackets

painted white / or fixing on stone base, including cutting holes

and making good the same, 32 mm dia Brass waste and M.I.

fisher union fitting, including all necessary fittings etc.

25 Providing and fixing standared extruded of alluminium section 4.350 Sqm 1175.56

of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/Rmt with

colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for Ventilation

26 Providing and fixing extruded colour anodized aluminium 60.700 Sqm 3171.70

three track sliding window having aluminium section having

outer frame for bottom member of size 92.00 x 31.75 x

mm size weight of 1.07 KG / Rmt and outer frame for top and

sides members size 92.00 x 31.75 x 1.50 mm size weight of

1.06 KG / Rmt, for shutters using top and bottom size 40 x 18 x

1.29 mm size weight 0.456 KG / Rmt & interlock member size

40 x 18 x 1.29 mm size weight 0.456 KG / Rmt & handle

member size 40 x 18 x 1.29 mm size weight 0.456 KG / Rmt

with 5 mm thick transparent bronze colour tinted float glass

for shutter and fixing wire net shutter of Stainless Steel wire of

304-grade of IS Gauge designation 85-G with wire of 0-56 mm

diameter as a third sliding shutter with necessary fixtures and

fastening like rubber gasket and transparent silicon sealant

glass fixing to frame etc. complete as per drawing and

instruction of Engineer-in-charge.

27 Providing and fixing 35 mm thick shutter for door having 61.740 Sqm 4116.87

factory made solid core, melamine faced, three layered resin

flushed door of approved brand and manufacture, with 1 mm

thick decorative laminated sheet on both side with 6 mm thick

and 35 mm x 35 mm specially shaped moulded teak wood

beading fixed around the door with necessary fixtures and

fastenings like S.S. butt hinges, S.S. Aldrop, S.S. Handle size

cm long, stopper, door closers arrow type etc. complete as per

detail colour & pattern approved by Engineer-in-charge.

28 Providing and fixing M.S. plain Grills (Safety Grill) / Shutter of 2838.600 Kg 112.69

required pattern to wooden frames of window / Door etc. with

M.S. flats at required spacing and frame all-round square or

round bars with round handed bolts and nuts or by screws,

including primer coat of approved quality and two coats of oil

painting etc. complete.

29 Providing and fixing in position collapsible steel shutters with 4.300 Qtl 6116.59

vertical channels 20 x 10 x 2 mm braced with flat iron

diagonals 20 x 5 mm size with top and bottom rails of T_rin

40x 40 x 6 mm with 38mm dia, steel pulleys complete with

bolts, nuts, locking arrangements, stoppers handles including

applying a priming coat of red lead paint.

30 Providing and fixing 90 cm high Stainless steel railing made 35.000 Rmt 2957.76

from anticorrosive 304 grade S S pipe of 50 mm dia (16Gauge)

as hand rail with S S 304 grade Baluster of 38 mm dia

(16Gauge) as a vertical support fixed in RCC slab at 1.2m c/c

including three horizontal S S pipes of 25 mm dia (16Gauge)

at equal distance fixed by 18.75 mm dia (16Gauge) S S pipe

with baluster including necessary accessories as per detailed

drawing as directed etc. complete.

31 20mm thick sand faced cement plaster on walls upto height 10 848.900 Sqm 352.44

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

32 Providing 10 mm thick cement plaster in single coat on brick / 246.200 Sqm 228.34

concrete on ceilings and sofits of stairs for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing with

a floating coat of neat cement slurry Ground Floor

33 Providing 10 mm thick cement plaster in single coat on brick / 112.700 Sqm 255.57

concrete on ceilings and sofits of stairs for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand) including finishing with

a floating coat of neat cement slurry First Floor

34 Providing and fixing concealed Cock of premium make with 12.000 No 808.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

35 Providing and fixing Angle Cock of premium make with 12.000 No 606.00

necessary other materials and piping connections etc.

complete as directed by Engineer-in-charge.

36 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 351.600 Sqm 1311.18

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing

& cleaning the surface etc. complete for light shade

37 Providing and laying Ceramic tiles 6mm thick in flooring treads 22.700 Sqm 997.16

of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

38 Providing and laying Ceramic tiles 6mm thick in skrting risers 133.550 Sqm 1030.57

of steps and dedo on 10mm thick cement plaster 1:3 (1-cement

: 3-coarse sand) and jointed with white cement slurry

39 Providing and laying water proofing treatment on terrace with 265.020 Sqm 1043.10

broken China mosaic tiles flooring over average 40 mm C.C.

1:2:4 bedding for maintaining slope for plain and curve surface

& 12 mm to 20 mm of broken piece of ceramic / glazed tiles

(one for more colour as directed) to be laid over cement

mortar bedding of C. M. 1:3 (1 cement : 3 sand) contain one KG

of water proofing materials per bag of OPC at plain or / and

slops and to be tempered to bring mortar ceramic up to

surface with using white cement and colour pigment, including

rounding of junctions and extending them up to 15 cm along

the wall and curing with bends any patterns or design as per

drawing and cleaning by using oxalic acid etc. complete.

40 Applying two coats of Birla or Asian acrylic lapy ( putty) & two 1102.300 Sqm 40.59

coats of primer of approved brand and manufacture on new

wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

41 Wall painting (two coats) with plastic emulsion paint of 895.900 Sqm 82.85

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

42 Wall painting (two coats) with plastic emulsion paint of 337.000 Sqm 88.38

approved brand and manufacture on ceiling and sloping roofs

to give an even shade including thoroughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

43 Finishing wall with weather proof exterior emulsion paint on 898.400 Sqm 120.26

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

44 Providing and fixing wash down water closet European / Anglo 10.000 No 2854.99

Indian type W.C. pan with integral “P” or “S” trap including

jointing the trap with soil pipe in cement mortar 1:1 (1 cement

: 1 find sand) (A) Vitreous china pattern - I (i) in white colour

including P & F 100 mm size “P” or “S” trap for water closet

squatting pan including jointing the trap with the pan & soil in

cement mortar 1:1 (1 cement : 1 coarse sand) including fixing

G.I. inlet connection for flush pipe with W.C. pan. including Jet

Sprey, fixing plastic seat & cover for wash down water closet

with C.P. brass hinges and rubber buffers. including P&F PVC

Flush tank of approved brand. Cera / equivalent - fitting "Ess

Ess" / equivalent.

45 Providing and fixing wash basin with single hole for pillar tap 10.000 No 2187.86

with C.I. Or M.S. brackers painted white including cutting holes

and making good the same vitreous china flat back wash basin

550 mm x 400 mm size in white colour including 32 mm

diac.p.brass couplin 32 mm dia. . M.I. fisher union providing

and fixing pillar tap capstan head screw down high pressure

with screw shanks and back nut 15 mm dia. brass screw down

stop tap 15 mm dia. etc. complete

46 Providing and fixing Urinal or approved quality including 6.000 No 1092.01

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

47 Providing and fixing screw down bib taps of following size.(B) 34.000 No 186.83

Brass chromium plated screws down Bib Tap.(i) 15mm dia.

48 Providing and fixing screw down bib taps of following size.(B) 10.000 No 263.77

Brass chromium plated screws down Bib Tap. (ii) 25mm dia.

49 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 13.000 No 586.27

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

50 Providing and fixing S.W. gully trap with C.I. grating brick 10.000 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R type

51 Providing and fixing C.P. brass towel rail comlete with C.P. 10.000 No 616.42

brass brackets fixed to wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

52 Providing and fixing 600mm x 450mm bevelled edge mirrror 10.000 No 859.41

of superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden pluge with C.P. brass screws and

53 Providing and Fixing PVC Spigot and Socket Soil waste and 55.000 Rmt 280.23

Ventilating Pipe of the following nominal size 75 mm dia.

54 Providing and Fixing P.V.C. Spigot and Socket Soil waste and 90.000 Rmt 339.05

Ventilating Pipe of the following nominal size 110 mm dia.

55 Constructing brick masonry chamber for underground C.I. 6.000 No 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm

deep for pipe line with one or two inlets.

56 Supplying & fixing PVC water tank such as Sintex including 3000.000 Litre 3.95

delievery at site, supply and fixing of inlet, outlet, air vent

overflow, drainage sleves of the specified size, with necessary

neo-prene gasket/packing/washers, GI washer & check nuts

etc. complete as directed on terrsce, loft in bathrooms etc in

any height. The rate shall include for fixing additional

accessories supplied by the supplier accessories. The

necessary pedestal / supporting structures shall be measured

57 Providing and fixing M.S. fan clamps type 1 of 16 mm. dia M.S. 41.000 No 132.29

bar bent to shape with hooked ends to R.C.C. slabs during

laying including painting the exposed portion of the loops all as

per standard design complete.

58 Providing laying and jointing in true line and level 25mm dia. 155.000 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

59 Providing laying and jointing in true line and level 15mm dia. 75.000 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

60 Providing Sock well of inside Dimension 3.00 mt. Deep & 2.00 3.000 No 43965.44

mt. Dia. Incl. Excavation, honey comb masonary work in C.M.

1:6 incl. Covering the top with slab and providing mainhole

cover incl. Providing vatas and curing etc. complete..

61 Constg Septic tank Including Excavation,B.B.C.C. 1:5:10, with 3.000 No 24632.14

brick masonarry wall in C;M 1:6 finished with Cement plaster

in C;M; 1:3 incl. partition with half brick masonary.Etc

62 Providing and fixing SS letters having name of village 3.000 No 6060.00

panchayat ghar name in gujarati at front elevation of building

size and letters given by as per engineer in charge.

63 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 110.000 Point 329.26

Sq.mm & earth wire of 1.5 Sq.mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in /

flushed on wall /ceiling, complete with 6A Tissino Type ISI

marked flush type switch / bell push and accessories erected

on Metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary Lamp holder /

ceiling rose / H.D. Connector as directed. (c) with oval conduit

/pvc casing capping double lock type

64 Point wiring for independent PLUG with following size mains 57.000 Point 310.07

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in /flushed on

wall/ceiling , complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection

erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet. (c) with oval conduit /pvc

casing capping double lock type

65 Mains with ISI marked electrolyte stranded copper conductor, 800.000 Mtr 63.63

Non PVC Zero Halogen free fire retardant insulated copper

conductor, insulated wire (HFFR) conforms to IS-694, erected

in existing pipe with 1.5sq. mm copper conductor of same

specifications for earth continuity of following size. [i] 3 wire

66 Supplying & erecting earth pit of minimum bore dia.150mm 3.000 No 4591.46

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications. (a) For Electrical Installation up to 440V

in normal soil Length of pipe - 1 Mtr Back filling compound -

Nos Bag of 15 Kg.

67 Providing & Erecting following Shockproof tissino type 6.000 No 30.30

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (1) One no Single

pole 6 A Switch / Bell push

68 Providing & Erecting following Shockproof tissino type 36.000 No 45.45

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (3) One no Single

pole 16 A Switch

69 Providing & Erecting following Shockproof tissino type 36.000 No 209.07

accessories erected on 3 mm thick PC (Polycarbonate) sheet in

PVC/ Metal Box. erected on wall/ ceiling. (14) Electronic Hum

free EME Socket Type Steps Fan Regulator

70 Providing & erecting Switch board for Computer or electric 14.000 No 318.15

apparatus consisting of following items in single board erected

on PVC / Metal board with 3 mm thick PC (Polycarbonate) /

Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined.

4 nos. 6A Switch

4 nos. 6A 5 pin Plug

71 Providing & erecting 240 V MCB double pole switch for motor 9.000 No 330.27

& inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. Cat.III

72 Providing and fixing Led Tube light of ISI Mark approved by 54.000 No 959.50

Engineer-in-Charge as bellow etc. complete. (A)Led Tube light

73 Providing and fixing Electric 18 Watt Led Bulb of ISI Mark 22.000 No 555.50

approved by Engineer-in-Charge as bellow etc. complete..(A)

18 Watt Led Bulb

74 Providing and erecting Sheet Steel powder coated MCB 9.000 No 702.96

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986 without MCB to house appropriate

nos. of MCBs. (The DBs should be used of same company of

MCB to be used) (E) Single phase 8 way single door

75 Providing and erecting open well type horizontal mono block 3.000 No 9613.18

pump set with cast iron body having following specification (C)

1.00 H.P. single phase open well motor pump set suitable for

145 LPM discharge @ 25 mtr. head, suitable for 32 mm dia.

delivery pipe with control panel and 10 mtr. long 3 x 1.5 sq.mm

submersible flat copper cable Cat. II.

76 Providing and erecting Approved make Ceiling fan with double 41.000 No 1596.81

ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200

mm sweep complete, canopy and 30 cms down rod erected on

existing hook or clamp with 24/0.2, 3 core flexible wire with

earthing. [Make shall be approved by Engineer in charge]

I / We am / are willing to carry out the work at ________________________________ % above / below percent

(should be written in figure and words) of the estimated mentioned above. Amount of my / our tender works out as

Estimated amount put to Estimated amount put to

Deduct ________ % below Rs. ____________ Add _______ % above Rs.___________

(* Please strike out whichever is not applicable)

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for work

under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 / 61 / C,

Dt. 03/05/2008 attached with tender papers.

7. The contractor is totally responsible to bare all applicable taxes i.e. G.S.T. etc. & Department will not entertain any contractor

representation to reimburse any financial burden due to applicable taxes, i.e. G.S.T. etc.

Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division