Machinery

Items :

Compressor Unit of 8 Bar capacity Compressor Unit (Horizontal): - Type : Reciprocating - Suitable for Pressure: Min 8 bar, - Delivery: 50 lpm (or more), - Reservoir capacity: 24 Litres (or more), - With Pressure regulator and water separator - protective enclosed belt guard - Overload motor protection - Accessible drain valve and - Automatic start/stop pressure switch control - Cast Iron Cylinder and frame - Operating Voltage: 230V, 50 Hz,

Cut section model for pneumatic components The sectioned parts to be complete in itself to demonstrate the internal construction details. - The Cut section model components should be mounted on a suitable frame. - The model shall have a detachable transparent fabric sheet all around for protection against dust and moisture List of Componenets: 1. Filter 2. Oil/Water Separator 3. Ball Valve 4. Unloader Valve, 5. Solenoid Valve, 6. Relay Valve, 7. Air Drier 8. Filter/Regular/Lubricator(FRL)

Cut-section models for hydraulic components • The sectioned parts to be complete in itself to demonstrate the internal construction details. • - The Cut section model components should be mounted on a suitable frame. • - The model shall have a detachable transparent fabric sheet all around for protection against dust and moisture List of Components: 1. Hydraulic pump 2. Accumulator 3. Solenoid Valve 4. Filter 5. Pressure Relief Valve 6. Directional Valve 7. Flow Control Valve 8. Check Valve 9. Hydraulic Cylinder

Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide Hydraulic / Pneumatic Workstation - Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: - Work Table : Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) - Drawer : Size (Approx.) – L460mmxW495mm xH158mm each, and - Overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm Drawer slide height (Approx.) :85mm.

PNEUMATIC Workstation - Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: - Work Table : Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) - Drawer : Size (Approx.) – L460mmxW495mm xH158mm each, and - Overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm Drawer slide height (Approx.) :85mm

Hydraulic Trainer Kit, each consisting of the following matching components and accessories: - One No. Hydraulic Power pack : with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjust\table from 0 – 60 bar, (3) oil reservoir, ≥5 litres capacity having sight glass, drain screw, air filter, and P and T ports. - Pressure relief valve, pilot-operated : 1 No. - Drip tray, steel: size 1160 mm x 760 mm: 1 No. - Pressure Gauge, Glycerine-damped, Indication range of 0 – 100 bar : 1 No. - Four-Way distributor with five ports, equipped with a pressure gauge : 1 No. - Double acting hydraulic cylinder with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke Length 200 mm : 1 No. - Suitable Weight for vertical loading of hydraulic cylinder : 1 No. - Mounting kit for weight for realizing pulling and pushing load : 1 No. - 3/2-way directional control valve with hand lever actuation : 1 No. - 4/2-way directional control valve with hand lever actuation : 1 No. - 4/3-way directional control valve closed-centre position, with hand lever actuation : 1 No. - Non-return valve : 1 No. - Pilot-operated check valve pilot to open : 1 No. - One-way flow control valve with integrated check valve :1 No. - T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.) : 2 Nos. - Quick coupling socket (1 No.) : 1 No. - One Set of Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation) All other items necessary for working of the hydraulic trainer for all experiments.

Pneumatic Trainer Kit, each consisting of the following matching components and accessories:: - Single acting cylinder, Max. stroke length 50 mm, Bore dia 20 mm : 1 No. - Double acting cylinder, Max. stroke length 100 mm, Bore dia 20 mm, magnetic type : 1 No. - 3/2-way valve, manually-actuated, Normally Closed : 2 Nos. - 3/2-way valve, pneumatically-actuated, spring return : 1 No. - One-way flow control valve : 2 Nos - 5/2-way valve, with manually-operated switch : 1 No. - 5/2-way valve, pneumatically-actuated, spring return : 1 No. - 5/2-way pneumatic actuated valve, double pilot : 1 No. - 3/2-way roller lever valve, direct actuation Normally Closed : 2 Nos - Shuttle valve (OR) : 1 No. - Two-pressure valve (AND) : 1 No. - Non-return valve : 1 No.. - Pressure gauge, 0-16 bar : 1 No. - Manifold with self-closing, NRV, 6-way : 1 No. - Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A : 1 No. - Relay station with 3 relays each with 4 contact sets (3NO+1NC or Change-over type), 5 A : 1 No. - 5/2-way single solenoid valve with manual override and LED : 1 No. - 5/2-way double solenoid valve with manual override and LED : 1 No. - Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof : 1 No. One Set of Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation) - - All other items necessary for working of the Pneumatic trainer for all experiments.

S.S. & S.C. Centre Lathe( All Geared)with 3 &4 jaw chucks - Bed Type: Flat Bed - Height of Centre: 150 mm and above - Distance between centres: 1000 mm and above - Swing Over bed: 450 mm and above - Swing over cross slide: 225 mm and above - Movement of cross slide: 225 mm and above - Movement of compound slide: 100 mm and above - Bed Width: 275 mm and above Main & Spindle: - Spindle nose: Threaded type, Dia 70 mm and above - Spindle Bore: Dia 50 mm and above Tail Stock: - Tail Stock Spindle/Quill Dia: 50 mm and above - Spindle Travel/Quill Travel: 140 mm and above Speed: - No. os spindle speeds: 8 Minimum - RPM/ Range: 80 - 1000 Minimum Feed: Longitudinal Feeds & Range: 24/0.045 -0.63 mm/rev - Transverse feeds and Range: 24/0.015 - 0.21mm/rev Threads: - Metric : Minimum 20, 0.5 - 7 mm - Inch: Minimum 24, 56-4 TPI Electrical : - Motor capacity: Minimum 5.5 KW - Power Supply: Three Phase, 415 - 440 V, 50 Hz

TOP ENGINEERS

SHREE GANESH MACHINERY AND EQUIPMENTS

LAKSHMI INDUSTRIES (REGD.)

NiYo Engineers

Kitek Technologies Pvt. Ltd

Vee Kay Systems

HIMDEV BUSINESS SOLUTIONS PRIVATE LIMITED

Mars Edpal Instruments Pvt Ltd

ALFA ELECTRONICS AND SCIENTIFIC CORP

GURUNANAK SCIENTIFIC DEVICES PRIVATE LIMITED

Rohit Uppal

Technozon Solutions

sunrisen scientific industries

TIRUPATI ENGINEERS CORPORATION

CREATIVE LAB

SHREE RADHIKA INSTRUMENTS

SAHIL ALLOYS AND MACHINE TOOLS