REPAIR PAINTING POLISHING AND RECANING OF WOODEN STEEL AND MISC FURNITURE ITEMS AT OTM MD ACCN UNDER GE ROORKEE

Amount

CHAIR SCHOOL WITH HAND BOARD STEEL FD/E6/MAP/05 AND SIMILAR PATTERN: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by engr-in-charge for day to day maintenance:-

Combined peice of seat & back frame complete with fitting accessories

Hand board support frame

Hand rest board with fitting accessories

Leg without shoe

Rubber shoe

M&L for welding (not exceeding 25 mm ) of steel items including scraping, preparing surfaces of welded portion and grinding etc complete all as directed by Engr-in-Charge.

M&L for preparing, cleaning of old painted surfaces, making good all fillings with putty including rubbing and smoothing the surfaces with emery paper and applying one coat of synthetic enamel paint on complete surfaces of steel chair school at furniture yard, Md/OTM accns under AOR of GE Roorkee as directed by Engr-in-Charge.

Almirah small/medium steel FD-1032 and similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by engr-in-charge for day to day maintenance.

Shelf

Cleat for shelf

hinge

Shutter Left/right sheet

Handle

Lock cover

Lock plate

Lock of Godrej, Harison

Locking verticle rod complete assy

M&L for welding (not exceeding 25 mm ) of steel items incl scraping, preparing surface of welded portion, grinding where ever required.

Preparation, cleaning of existing decorated surface/ rubbing by emery paper, removing all s, filling with putty, painting for repaired and existing good furniture as directed at site, at furniture yard, Md, OTM buildings under AOR of GE as directed by Engr-in-Charge.

Chair Verandah steel MAP FD/MAP-II/06 and similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat, made of PVC moulding

Back, made of PVC moulding

Rubber shoe .

Leg (tube conduit) without shoe

Seat/back short tube conduit

Seat/back long tube conduit

Horizontal rod below seat

Arm rest

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparing old painted / new steel surfaces of chair verandah steel MAP including removing dents/spots (if any), tightening the loose joints, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new /welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Table Dressing Gents wooden FD-230 & Fd/E6/MAP/16 and similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.

Looking mirror

back sheet of mirror

Mirror frame complete

Drawer complete for Fd-230

knob for Fd-230

top /bottom sheet of base frame for Fd-230

Left/right/partition sheet of base frame for Fd-230

Bottom back sheet of base frame for Fd-230

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.

Form with back steel FD-78/ similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat plank, made of first class hard teak wood..

Back plank, made of First class hard teak wood..

Centre support stiffners complete

Top/bottom short stiffener

Rubber shoe

M&L for preparing old painted / new steel surfaces of chair writing steel including removing dents/spots (if any), tightening the loose joints, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new /welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Form without back steel Fd-77/ similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-Charge:-

Seat plank complete.

Centre support stiffners complete set

Top/bottom short stiffener

Rubber shoe

M&L for preparing old painted / new steel surfaces of chair writing steel including removing dents/spots (if any), tightening the loose joints, cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint on old painted surfaces and two coats on new /welded surfaces over a coat of red oxide primer as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge at furniture yard, Md / OTM accns under AOR of GE.

Locker steel FD-1029 and similar pattern:- Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by engr-in-charge.

Shelf

Cleat for shelf

Conduit pipe

Handle

Hasp & staple

M&L for spot welding/run welding (not exc one inch in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparatiny old decorated / new steel surfaces of the locker including removing dents/spots (if any), cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying two coats of synthetic enamel paint to give glossy finish including priming the new /welded surfaces as required complete all as specified and directed at furniture yard, Md / OTM accns under AOR of GE as directed by Engr-in-charge.

Table office officers steel FD-1003 and similar pattern:- Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.

Hard top sheet

Shutter with hinges

Top/Bottom long stiffener

Top/Bottom short stiffener

Drawer without lock

Lock for Drawer, make- Godrej, Harison

Rubber shoe

M&L for spot welding/run welding (not exc one inch in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finish complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same to be treated as included in rates of the new part.

M&L for preparatiny old decorated / new steel surfaces of the table including removing dents/spots (if any), cleaning the surfaces, rubbing by emery paper, filling the gaps with putty and applying two coats of synthetic enamel paint to give glossy finish including priming the new /welded surfaces as required complete all as specified and directed at furniture yard, Md / OTM accns under AOR of GE as directed by engr-in-charge.

LOCKER TWO UNIT STEEL FD 127 (M) AND SIMILAR PATTERN: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge for day to day maintenance:-

Door shutter without lock

Lock of make Godrej /Harison

M&L for welding (not exceeding 25 mm) of steel items including scraping, preparing surfaces of welded portion and grinding etc complete all as directed by Engr-in-Charge.

M&L for preparing, cleaning of old painted surfaces, making good all fillings with putty including rubbing and smoothing the surfaces with emery paper and applying one coat of synthetic enamel paint on complete surfaces of steel locker two unit at furniture yard, Md/OTM accns under AOR of GE Roorkee as directed by Engr-in-Charge.

Rack adjustable 6 tier steel FD-106 (M) and similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by engr-in-charge for day to day maintenance..

Rack/shelf

steel angle frame

nut bolts fitting

M&L for welding (not exceeding 25 mm) of steel items including scraping, preparing surfaces of welded portion and grinding etc complete all as directed by Engr-in-Charge.

Preparation, cleaning of existing decorated surface/ rubbing by emery paper, removing all s, filling with putty, painting for repaired and existing good furniture as directed at site, at furniture yard, Md, OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table wooden 3’x3’ without drawer/similar pattern FD- 291/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.

Top particle board

Stiffener complete at bottom

Leg without PVC ring

front/back/left/right Rail

PVC Ring

Bracket

Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table Wooden 5'x2'10" FD139 or similar pattern: Removing the existing unserviceable parts and S&F following similar new parts as per Drg and as directed by Engr-in-charge for day to day maintenance:-

Hard top complete

Long rail

Short rail

PVC ring

Bracket of teak wood

M&L for preparing old decorated / new wooden surfaces by tightening of joints, filling all cavities with putty, removing all spots, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complete all as directed by Engr-in-Charge. at Furniture Yard / Md / OTM buildings under AOR of GE.

Charpoy hard top steel MAP Drg no - FD/MAP-II/01 or similar pattern.. Removing the existing unserviceable part and S&F following similar new part with fixing accessories as per Drg and as directed by Engr-in-charge for day to day maintenance.

Top Plywood

Stiffner

Leg without shoe

Rubber shoe

Long rail

Short rail

S&F, M&L for tightening all loose parts where ever possible. Preparation, cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting for repaired and existing good furniture as directed at site, at furniture yard, Md, OTM buildings under AOR of GE as directed by Engr-in-Charge.

M&L for welding (not exceeding 25 mm) of steel items including scraping, preparing surfaces of welded portion and grinding etc complete all as directed by Engr-in-Charge.

Table Dressing Ladies wooden FD- 251 & FD/MAP-II/07 similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge for day to day maintenance.

Looking mirror

back sheet of mirror

Mirror frame complete

Drawer complete without knob/handle

Leg with support frame for FD-251

knob for FD-251

Sliding glass for FD-251

Aluminium channet complete set for FD-251

Top /bottom sheet of base frame for FD-251

Left/right/partition sheet of base frame for FD-251

bottom back sheet of base frame for FD-251

stool canned for FD-251

stool cushioned for MAP pattern

Handle for drawer/door for MAP pattern

S&F, M&L for tightening all loose parts where ever possible. Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table Peg wooden FD-384 and similar pattern:- Removing the existing unserviceable part and S&F following similar new part of well seasoned Ist class hard wood (Teak) as per Drg and as directed by Engr-in-charge.

Stiffener set of Leg

Leg without PVC ring

Long rail

Short rail

PVC ring

Bracket

Top particle board

M&L for preparing old decorated / new wooden surfaces by removing all spots, filling all cavities with putty, rubbing with emery paper to smooth the surfaces and applying two or more coats of french polish to give shiny finish including filler coat on new wooden surfaces (if required) complere at furniture yard / Md / OTM buildings under AOR of GE as directed by Engr-in-Charge.

Table writing wooden FD-275, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-charge.

Leg without PVC ring

Long rail

Short rail

Drawer

Drawer bearer

shutter

shelf

side sheet left/right

back sheet

hinge

Stiffener complete at bottom

Top particle board

PVC Ring

Bracket

Tightening all loose parts, Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, polishing for repaired and existing good furniture at furniture yard/Md/OTM buildings under AOR of GE as directed by Engr-in-Charge.

Book shelf open small steel FD-69/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg

Top/shelf/bottom sheet

MS slot iron

left/right sides sheets

M&L for welding (not exceeding 25 mm) of steel items including scraping, preparing surfaces of welded portion and grinding etc complete all as directed by Engr-in-Charge.

Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings.

JAISWAL ENTERPRISES

M/s R.K.Jain

VARAROHA BUILDERS

M/S CHANDER SHEKHAR

Pradeep Bros