Major repair in Boys Higher Secondary Secondary School Rajouri

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand

Renewing glass panes, with putty and nails wherever necessary including raking out old putty : A. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Shelves (cast-in-situ)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040mm bowl depth 250mm

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL-PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:( Make : Kitec, Vista, Prayag,Astral,) 1216 (16mm OD) pipe.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White

PROVIDING AND FIXING OF LIGHTING POINTS /FAN POINTS IN 1.5 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF APPROVED MAKE INCLUDING PROVIDING AND FIXING OF 6-AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF HEATING POINTS IN 4 MM PVC INSULATED COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING WITH 2.5 MM PVC INSULATED COPPER WIRE OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 6/16 -AMP SWITCH RECESSED /SURFACE POINT TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF WIRING FOR 3-5 PIN 6-AMP SOCKET POINTS IN 2.5 MM PVC COPPER WIRE LAID THROUGH PVC CONDUIT PIPE /CHANNELS OF SIZE WITH ITS FITTING OF SAME MAKE INCLUDING PROVIDING AND FIXING OF 5-PIN 6-AMP SWITCH/SOCKET TAKEN UPTO DB DULLY TESTED & COMISSIONING COMPLETE..AS PER BIS 732 (1989)

PROVIDING AND FIXING OF 8-12 WATT LED SURFACE LIGHT FITTINGS (ROUND/SQUARE SHAPE) COMPLETE IN ALL RESPECTS

Carriage of material by M.T incl loading/unloading & stacking complete

C. Sand av. Lead 120 km

BRICK FOR AN AVG. DIST OF 120 KM

D. Stone agg. Below 40 mm nominal size av. Lead 20 km