Active

Works

Civil Works - Others

Aluminum partition works in control room building for the FOTE panel installation work at various EHV substation of under EHT-Construction Division Satna.

MP Power Transmission Co. Ltd.

Satna, Madhya Pradesh

Amount: ₹34.2 LCloses: 5 Oct 2026

Timeline

Published11 Sept 2026
Closes5 Oct 2026
Bid Opening6 Oct 2026

Tender Value

₹34.2 L

EMD Value

₹68,360

Closing Date

5 Oct 2026, 3:30 pm

Tender Inviting Organisation

Name

CE (EHT-Construction)

Address

Block No. 4, Shakti Bhawan, Rampur, Jabalpur

Work Description

Aluminum partition works in control room building for the FOTE panel installation work at various EHV substation of under EHT-Construction Division Satna.

Tender Information

Tender ID

2026_MPPTC_535763_1

Reference Number

889

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

180 days

Location

Satna

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

RequiredEMD Document (.pdf)

RequiredTender Document (.pdf)

RequiredValid Registration with MP, PWD or Bank, CA and Experience Certificate of As per clause No. 2 and 3 (.pdf)

RequiredRegistration Certificate of GST (.pdf)

RequiredEPF Registration and PAN No. (.pdf)

RequiredESIC certificate (.pdf)

RequiredWork Experience Certificate if not Registered in MP, PWD (.pdf)

RequiredDigital Signature Certificate with validity date (.pdf)

RequiredAll Schedules and documents as per NIT/Tender document (.pdf)

RequiredList of Technical staff if not Registered with MP, PWD (.pdf)

RequiredQuestionnaire (.pdf)

RequiredAdditional Information (on Rs. 200 Stamp Paper Notarized) (.pdf)

RequiredMandatory to confirm whether the bidder is registered with MSME or not Clause 35 of tender document (.pdf)

Finance

RequiredPrice bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,770

EMD Fee Amount

₹68,360

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

11 Sept 2026

Published

11 Sept 2026

Bid Opening

6 Oct 2026

Download Starts

11 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

11 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Aluminum partition works in control room building for the FOTE panel	-	-	-	-
2	(MPPWD SOR No.21.1.1.2)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)	3,000	Kg	416	₹12,48,000
3	(MPPWD SOR No.21.1.2.2)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)	600	Kg	484	₹2,90,400
4	(MPPWD SOR No.21.2.2)Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.	211.2	Sqm	907	₹1,91,558.4
5	(MPPWD SOR No.9.84)Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).	30	Each	820	₹24,600
6	(MPPWD SOR No.10.27.2)Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 5.50 mm thick glass panes	554.4	Sqm	873	₹4,83,991.2
7	(MPPWD SOR No.21.5.2)"Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With brass cover plate - minimum 1.25 mm thickness."	30	Each	2,072	₹62,160
8	(MPPWD SOR No.9.109.1)Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm	30	Each	241	₹7,230
9	(MPPWD SOR No.9.109.2)Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm	30	Each	195	₹5,850
10	(MPPWD SOR No.9.110.3)Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm	30	Each	102	₹3,060

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 3.55 MB

Work Item Documents

Document384.pdf

Tender Documents • 1.83 MB

Questionnaire.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Aluminum partition works in control room building for the FOTE panel

(MPPWD SOR No.21.1.1.2)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

3,000

416

₹12,48,000

(MPPWD SOR No.21.1.2.2)Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

600

484

₹2,90,400

(MPPWD SOR No.21.2.2)Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

211.2

Sqm

907

₹1,91,558.4

(MPPWD SOR No.9.84)Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).

Each

820

₹24,600

(MPPWD SOR No.10.27.2)Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 5.50 mm thick glass panes

554.4

Sqm

873

₹4,83,991.2

(MPPWD SOR No.21.5.2)"Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : With brass cover plate - minimum 1.25 mm thickness."

Each

2,072

₹62,160

(MPPWD SOR No.9.109.1)Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm

Each

241

₹7,230

(MPPWD SOR No.9.109.2)Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm

Each

195

₹5,850

(MPPWD SOR No.9.110.3)Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm

Each

102

₹3,060