SPECIAL REPAIRS IN OR MD BLOCK-III (BLDG NO. 01 TO 11) AT GARUDA LINES TRICHY UNDER AGE (I) COIMBATORE

Amount

Taking down existing PVC/Steel/Wooden chowkats or frames not exceeding 1.5sqm each with shutters (without taking of shutters from the the frames) and removing to store complete all as specified and as directed.

Taking down existing PVC/Steel/Wooden chowkats or frames exceeding 1.5sqm not exceeding 4.0 sqm each with shutters (without taking of shutters from the frames) and removing to store complete all as specified and as directed.

Taking down shutters of any descripions not exceeding 1.0 sqm each and removing to store complete all as specified and as directed.

Taking down door shutters of any description steel/wooden exceeding 1.0sqm and not exceeding 2.0sqm each and refixing in the same opening after easing and adjusting/resizing complete all as specified and as directed.

S&F Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue and pinned at joints complete all as specified and directed.

S&F 30mm thick, second class hardwood glazed and skeleton shutters, open rebatted and prepared to receive glass with sash bars divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and as directed.

M&L 35mm thick, second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick, second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile shall be as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F in repairs Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

S&F Factory made solid PVC molded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick molded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

Cutting holes in brick walls/ stone walls exceeding half brick but not exceeding One brick built in cement mortar for inserting holdfast etc complete all as specified and directed.

S&F mild steel flat iron as in holdfast and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Harrison Curtain rails anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F 300mm long mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 150mm Floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F in repairs 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100 mm long, butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 125 mm long, butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section complete all as specified and as directed.

S&F in repairs 300mm Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section complete all as specified and as directed.

S&F 100 mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 150 mm long aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F in repairs 150 mmlong aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Hacking out old broken glass exceeding 1.50Sqm (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F Frosted sheet glass 4mm thick with ordinary quality in square not exceeding 0.5sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F plain sheet glass 4mm thick with ordinary quality in square not exceeding 0.5sqm in each pane and glazing with oil putty complete all as specified and as directed.

Dismantling water tanks and removing store exceeding 500 & not exceeding 1000 litres capacity complete all as specified and as directed.

S&F 500 litres capacity of rotational moulded polythelene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

S&F Ball brass valves, high pressure with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule of 20mm bore and fixed complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections,including cleaning for removal to store complete all as specified and as directed.

Refixing 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and as directed.

Refixing 20 mm of old steel tubing and connections in new or old position(walls, ceiling, floors etc) complete all as specified and as directed.

S&F 15mm bore GI tubing, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm bore GI tubing, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repairs Bip tap, cast copper alloy, Chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore and fixed complete all as specified and as directed.

S&F in repairs Pillar taps, cast copper alloy, Chromium plated, fancy type, with capstan heads, screwed down high pressure,with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore and fixed. complete all as specified and as directed.

S&F in repairs, Stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore fixed complete all as specified and as directed.

S&F in repairs Brass, chromium plated shower rose of size 75mm with swivel joints including shower arm 15mm size, 195mm long with bend of 45 degree with flange for fixing with pipe of 15mm bore complete all as specified and as directed.

S&F in repairs Brass, chromium plated towel rail, 20 mm dia, D type, 60 mm long between flanges and fixed complete all as specified and as directed.

S&F PTMT Grating doom 125 mm dia with waste hole ( minimum weight 40 gms) complete all as specified and as directed.

S&F repairs Vitreous china Wash Hand Basin, white, flate back of size 600x480mm excluding taps, waste, chain and plug and porcelain stopper but including 32mm down stand PVC waste pipe and brackets fixed complete all as specified and as directed.

S&F 32 mm high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 including making thread for fixing with waste coupling complete all as specified and as directed.

S&F 450 mm long, PVC connection with PTMT nuts suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F 600 mm long, PVC connection with PTMT nuts suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern of 10 litre capacity, syphonic action type, white, with inlet, ball valve, float and handle including fixing brackets complete all as specified and directed.

Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet, white, Orissa pattern squatting pan of size 580x440mm with integral foot rest including making necessary connections to soil pipes and flushing cistern, fixed complete all as specified and as directed.

S&F in repairs stainless steel sink with draining board of over all size 495x420mm and bowl size 410x330x160mm, made out of 1mm thick stainless steel sheet of good quality including proven of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets all as specified and as directed by the Engineer-in-Charge

S&F PTMT Waste coupling for 32 mm bore discharge pipe (half or full threaded), minimum weight 45gms complete all as specified and as directed.

S&F PTMT Waste coupling for 40 mm bore discharge pipe (half or full threaded), minimum weight 60gms complete all as specified and as directed.

S&F PVC (SWR) floor trap, 75mm outlet dia, plain with grating including joining with solvent cement complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls and ceiling including racking out joints, hacking for key, scrubbing down and washing with water etc complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:6 finished evn and smooth without using extra cement on brick wall faces complete all as specified and as directed.

M&L Rendering 10mm thick in CM 1:4 finished evn and smooth without using extra cement on brick wall faces complete all as specified and as directed.

M&L Preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and as directed.

M&L Preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and as directed.

M&L Preparation of newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed.

M&L Preparation of old treated plastered wall surface by complete removal of existing treatment and applying two coat of oil bound distemper over a priming coat using chalk whiting complete all as specified and as directed.

M&L Preparation of old treated plastered wall surface by complete removal of existing treatment and applying three coat of white wash complete all as specified and as directed.

M&L Preparation of old treated plastered wall surface by complete removal of existing treatment and applying two coat of cement base paint over alkali resitant primer complete all as specified and directed

M&L Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying a two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of old treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of old treated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of new plastered ceiling surfaces and applying two coats of oil bound distember over a coat of primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling/skirting/setting coat plastering etc including cement mortar bedding (but not backing), removing debris off the premises complete all as specified and as directed.

M&L Non skid light coloured cermaic tiles 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6. as in floors etc. complete all as specified and as directed.

M&L Light cloured Ceramic tiles, 10mm thick, (square/rectangular), area of each tiles not exceeding 0.36sqm, set jointed in neat cement slurry and pointed in white coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 as in floors etc complete all as specified and as directed.

M&L Light coloured glazed ceramic tiles 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster as backing coat in CM 1:4 as in Dados/skirting etc complete all as specified and as directed.

Demolition of unreinforced cement concrete of any description in ground floors not exceeding 15cm thick ( below or above ground level) complete all as specified and as directed.

M&L 75 mm thick, plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection, hard standing and foot path complete all as specified and as directed.

M&L 40 mm thick, plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate finished even and smooth with using extra cement as in floor complete all as specified and as directed.

M&L Cutting chases not exceeding 10cm girth , pinning in, making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc.and making good complete all as specified and as directed.

Cutting holes into or through cement concrete slabs, chajjas etc of superficial area not exceeding 100Sqcm including making good to disturbed surfaces complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed.

S&F Seamless calcium silicate ceiling 12mm Thick made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed. Note:- Frame work for ceiling shall be measured and paid separately

M&L 20mm thick, granite slab (of any type) machine cut, bedded and jointed with grey cement slurry 1:4 and pointed with white cement 1:2 with admixture of pigments to match with the shades of granite stone as in platforms/cooking tops including cutting, polishing and drilling holes for gas pipe 25mm dia etc., laid over and including 20mm thick cement screed in cement mortar 1:6 including roudning to edges of stone slabs and demoliton of old stones. slabs and tiles of any description etc.complete all as specified and as directed.

M&L Brickwork built in CM 1:6 with subclass `B' bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L Providing precast cement concrete 1:2:4, Type B1, using 20mm graded stone aggregate set in CM1:4 in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Dismantling mangalore pattern or similiar roof tiling complete all as specified and directed

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40sqcm in section in any position and as in framed work complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering /clading to wall, and fixed with self tapping screws complete all as specified and directed.

M&L Second class hard-wood scantlings, clean sawn as in roof members complete all as specified and directed.

M&L Preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to Fe-410W (Grade E -250 quality A) complete all as specified and as directed.

M&L Preparation of new steel Surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc primer complete all as specified and as directed.

KDR CONSTRUCTION

M Govindarajan

TECKXPERT ENTERPRISES