AC / RKK / 29 /19-20 / 17

Various items of laboratory furniture of reputed make & brands are required for furnishing the newly established Testing & Training Center for Food & Water Quality in BCKV, Mohanpur, Nadia as per the following specifications. Warranty: At least 2 years onsite warranty should also be assured along with the offer

Laboratory Table Specification Size: L:W:H - 2400 X 1200 X 750 mm Laboratory table- top & base - Providing & fixing of laboratory table with 2.5’’ x 2.5’’ sal wood frame with top made of 25 mm and bottom and racks of cupboard made of 25 mm, all other outer sides 12 mm B.W.R grade block board conforming IS:303-1989 chemically treated for termite, borer and water resistant; bonded with melamine fortified phenol formaldehyde synthetic resin of approved make and brand; Decorative lamination with approved brand conforming to B.S. 476 & environment friendly; All block board both side pasting by good quality adhesive, laminates of outside thickness 1.00 mm & 0.80 mm on inner portion with approved colour & quality to give a clean finish and must be any bubble and undulation free. Cupboards: two on both end of the table, size 1200 mm (L) x 800 mm (W) with auto hinge double door type fitting. There will be one rack 25mm thick plywood with lamination (L type) in between two cupboards. All accessories including locks, handles, bits etc. must be of approved quality.

Laboratory Table Specification Size: L:W:H - 1800 X 1200 X 750 mm Laboratory table- top & base - Providing & fixing of laboratory table with 2.5’’ x 2.5’’ sal wood frame with top made of 25 mm and bottom and racks of cupboard made of 25 mm, all other outer sides 12 mm B.W.R grade block board conforming IS:303-1989 chemically treated for termite, borer and water resistant; bonded with melamine fortified phenol formaldehyde synthetic resin of approved make and brand; Decorative lamination with approved brand conforming to B.S. 476 & environment friendly; All block board both side pasting by good quality adhesive, laminates of outside thickness 1.00 mm & 0.80 mm on inner portion with approved colour & quality to give a clean finish and must be any bubble and undulation free. Cupboards: two on both end of the table, size 600 mm (L) x 600 mm (W) with auto hinge double door type fitting. There will be one rack 25 mm thick plywood with lamination (L type) in between two cup-board. All accessories including locks, handles, bits etc. must be of approved quality.

Standard Table Specification Standard table's top made of 25 mm thick & gable end & modesty panel made of 18 mm thick termite proof water resistance plywood with both side lamination. Thickness of the all outer laminates: 1.00 mm & thickness of inner laminates: 0.80 mm with approved colour & quality to give a clean finish and must be any bubble and undulation free. All exposed edges sealed with teak wood bits. The table should have one pencil drawer system on one side and one cupboard with locking arrangement; and a open shelf storage system. Completed with necessary hardware & fittings from approved brand.

Size: L:W:H - 1200 X 600 X 750 mm

Size: L:W:H - 1800 X 600 X 750 mm

Size: L:W:H - 1200 X 750 X 750 mm

Wooden Table Specification Wooden table made from 18 mm thick termite, borer and water resistant ply board, all visible surfaces finished with 1.0 mm thick lamination; Size: L:W:H : 1800 X 600 X 650 mm

Dias Table Specification Wooden table made from 18 mm thick termite, borer and water resistant ply board, all visible surfaces finished with 1.0 mm thick lamination with approved decorative design; Size: L:W:H : 1200 X 750 X 750 mm

Full Height Storage Specification A cabinet with two swinging doors (width: 800 mm) & three shelves making four compartments should be made of 18 mm thick plywood with both side lamination; All plywood both side pasting by good quality adhesive, laminates of outside thickness 1.00 mm & 0.80 mm on inner portion with approved colour & quality to give a clean finish and must be any bubble and undulation free. All exposed edges sealed with suitable teak wood bits. Back of cabinet to be supported by 6 mm thick plywood with lamination. Completed with necessary hardware & fittings from approved brand. Size: L:W:H - 800 X 600 X 1990 mm

Lab Stool Specification Lab stool- Made by salwood structure - Leg 50 mm X 50 mm , side rail 75 mm x 25 mm, Tana 50 mm x 25 mm, Top made by 25 mm solid teak wooden plank. Size: L X W X H: 450 x 300 x 525 mm

High Stool Specification High stool- Made by salwood structure - Leg 50 mm X 50 mm , side rail 75 mm x 25 mm, Tana 50 mm x 25 mm, Top made by 25 mm solid teak wooden plank with two stair and foot rest. Size: L X W X H: 450 x 300 x 1200 mm

Anti-Vibration Table Specification Table Work Top: 17 mm black granite, construction material: 18/20SWG CRCA sheet fabricated with powder coated (PP); size: L×W×H: 900 x 600 x 900 mm

Wall-Side Sink Unit Specification Knock Down Type Modular Steel Laboratory Furniture with support; Table Size: L×W×H: 750 mm × 750 mm × 900 mm; Colour: White; Construction material: 19/20 SWG GI sheet; All surfaces degreased and epoxy powder coated and 17/18 mm thick; Zed black granite work top; The cabinet should be in double skin construction; all handles in PVC construction, hinges self closing type Hettich Germany Make. All hardware/screws should be of stainless steel (SS); Table Top: Zed black granite work top (Thickness: 17/18 mm).

Wall side work bench Specification Wall side work bench with leg gap; Knock down type modular steel laboratory furniture with support; Colour: white and blue; Construction material: 19/20 SWG GI sheet; All surfaces degreased and epoxy powder coated with 17/18 mm thick black granite work top; The cabinet and drawers should be in double skin construction, all handles in PVC construction, hinges self closing type and channel Hettich Germany make. All hardware/screws to be stainless steel (SS); Table top: black granite work top (thickness: 17/18 mm); Storage unit: under counter storage cabinets with adjustable one rack and one row of drawers at the top, 2 shutter with lock.

Size (L×W×H): 750 × 850 × 750 mm

Size (L×W×H): 750 × 750 × 900 mm

Reagent Rack Construction material: 19/20SWG GI sheet. All surfaces should be degreased and epoxy powder coated; Size : (L x W X H): 1450 mm X 400 mm X 450 mm.

Fume Hood Chamber Specification Auto Bypass/ Constant Bypass type Fume hood: 6 ft; Aero dynamic; floor mounted fume hoods exterior made of epoxy powder coated durable (70 to 80 microns), 1.5 mm & 1.2 mm thick heavy duty GI sheets with rigid structure, interior made of chemical & heat resistant, fire retardant, smooth finish, easily cleanable panels made of durable special material integral work walls (6 mm thick); ASTM Flame spread index ˂25; including 17 mm to 18 mm thick black granite; Work top, 2 nos. oval shaped 100 mm X 200 mm ‘PP’ detachable sinks; Vertical rising Sash with 5 mm thick, toughened float glass, 8 nos. colour coated service valves with suitable pipes for water, air, Ar and vacuum connections, 2 nos. Fluorescent lights (40 watts for 1800 mm) with 4 nos. 6/16 A electrical sockets, interstitial 3 point suction system (for light, normal & heave fumes) with baffle arrangement, fully openable back panels for service line access and side panels. Fume hood size: 1800 mm X 1000 mm X 1600 mm.

M/S ANU ENTERPRISE

SARAMA STEEL FURNITURE

MOTHER ENTERPRISE

M/S ROY FURNITURE

Roy Brothers Enterprises

Roy Brothers Enterprises

M/S ROY FURNITURE

MOTHER ENTERPRISE

SARAMA STEEL FURNITURE