Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.4 LAccepted-Finance | ₹17.4 L | 1 | Accepted-Finance Bid found in order |
| 2 | 2₹17.4 L+₹520 (0.03%)Accepted-Finance | ₹17.4 L+₹520 (0.03%) | 2 | Accepted-Finance Bid found in order |
| 3 | 3₹18.2 L+₹86,996 (5.01%)Accepted-Finance | ₹18.2 L+₹86,996 (5.01%) | 3 | Accepted-Finance Bid found in order |
| Sl No | Description | Qty | Unit | DR WATTS ELECTRIC L1 | Sheikh Aquib L2 | Arise Techno L3 |
|---|---|---|---|---|---|---|
| 1.00 | Wiring for Light point/fan point/exhaust fan point//call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required | 20 | Point | 1,085 ₹21,700 | 1,091 ₹21,820 | 15 ₹300 Lowest |
| 2.00 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. | 520 | RM | 191 ₹99,320 | 191 ₹99,320 | 180 ₹93,600 Lowest |
| 3.00 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire. | 150 | RM | 245 ₹36,750 | 245 ₹36,750 | 190 ₹28,500 Lowest |
| 4.00 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 10 sq. mm + 1 X 6 sq. mm earth wire) | 100 | RM | 340 ₹34,000 | 344 ₹34,400 | 300 ₹30,000 Lowest |
| 5.00 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB) :12 way, Double door | 2 | Each | 3,521 ₹7,042 | 3,521 ₹7,042 | 1,900 ₹3,800 Lowest |
| 6.00 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Single Pole) | 40 | each | 254 ₹10,160 | 254 ₹10,160 | 220 ₹8,800 Lowest |
| 7.00 | Supplying and fixing 32 A rating, 240V 10 kA, “C” curve, Double pole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | 15 | Each | 911 ₹13,665 | 911 ₹13,665 | 440 ₹6,600 Lowest |
| 8.00 | Supply and installation of following cable size of perforated painted with powder coating M.S cable trays with perforation not more than 17.5% in convienent sections joined with connectors , suspended from the ceiling with MS Suspenders including bolts and nuts painting suspenders etc as required (150mmx50mmx1.6mm) | 100 | RM | 380 ₹38,000 | 380 ₹38,000 | 60 ₹6,000 Lowest |
| 9.00 | Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. | 8 | No. | 1,910 ₹15,280 Lowest | 1,910 ₹15,280 Lowest | 2,300 ₹18,400 |
| 10.00 | Supply,installation and testing of Electrical SS Combine PVC type 16 Amp switch and socket. Complete job | 50 | each | 164 ₹8,200 Lowest | 164 ₹8,200 Lowest | 200 ₹10,000 |
Tender Value
₹24.8 L
EMD Value
₹50,000
Closing Date
12 Aug 2025, 5:00 pmClosed
Vice-Chancellor CUK
Green Campus Ganderbal
Electrical works of the Engineering Workshop
2025_CUoK_872228_1
NIT-08-2025-WorkshopElectrical
Open Tender
Electrical Works
Item Rate
45 days
Tulmulla Campus Ganderbal
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Central University of Kashmir
₹50,000
Yes
Engineering Wing
10 Sept 2025
6 Aug 2025
14 Aug 2025
6 Aug 2025
12 Aug 2025
6 Aug 2025
6 Aug 2025 - 11 Aug 2025
8 Aug 2025
Amount
Wiring for Light point/fan point/exhaust fan point//call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 10 sq. mm + 1 X 6 sq. mm earth wire)
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB) :12 way, Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Single Pole)
Supplying and fixing 32 A rating, 240V 10 kA, “C” curve, Double pole miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supply and installation of following cable size of perforated painted with powder coating M.S cable trays with perforation not more than 17.5% in convienent sections joined with connectors , suspended from the ceiling with MS Suspenders including bolts and nuts painting suspenders etc as required (150mmx50mmx1.6mm)
Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistancemore than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required.
Supply,installation and testing of Electrical SS Combine PVC type 16 Amp switch and socket. Complete job
Supply ,Installation,Testing commissioning of 120-150 watt High Bay LED Luminare with rated voltage of single phase 230 Volts , Frequency 50 HZ, +- 2 Hz , operating input voltage range of 150-250 V, colour temperature of 5500-6500K, LED Life 50000Hrs , degree of protection IP-66, shape of Luminare round , mounting type metallic adjustable brackets with eye bolt. The lamp housing shall be pressur die cast metal alloy heat sink along with sufficient heat sink fins to dissipate heat effectively. The lamp material should be heat resistant toughened glass. The Luminious intensity shall be 12000 - 150000lumens
Supply installation testing and commisssioning of industrial Exhaust fan of 600 mm dia, 3000CFM, 1400 RPM, IP Rating IP-55, low Noise of 60-65 db Ac single phase 160-240 Volts.
SITC of Main Panel fully compartmentized cubical type steel clad floor mounted Cabinet busbar door hinges etc complete job as per follows INCOMMER FROM MAINS 630 A MCCB 4P THERMAL RELEASE, 36KA, 415V (1 no) EXTENDED ROTARTY OPERATING HANDLE(1 no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (1 no) Add On Block ON/OFF/TRIP (03 no) ON OFF INDICATING LAMPS 220V AC LED TYPE SET (3 no) 600/5A, 15VA CL-1.0, CURRENT TRANSFORMER - RESIN CAST/ENCAPSULATED (3no) VAF METER (1no) PHASE INDICATING LAMPS R-Y-B 220V AC - LED TYPE (SET) (3no) C.T. SHORTING LINK (3no) 06A SP 10 KAMCB FOR CONTROL C CURVE (03no) OUTGOING FEEDER MCCB 200A 4P THERMAL RELEASE, 415 V- 36KA (2no) ROTARY OPERATING HANDLE (2no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (2no) Add On Block ON/OFF/TRIP (03no) ON OFF INDICATING LAMPS 220 V AC - led type (SET) (03 no) OUTGOING FEEDER MCCB 125A 3P THERMAL RELEASE, 415V - 25KA (11no) ROTARY OPERATING HANDLE (11no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (11 no) ADD ON BLOCK ON/OFF/TRIP (03no) ON-OFF INDICATING LAMPS 220VAC-LED TYPE (SET) (03no) BUS BAR 800 A TPN ALUMINIUM BUS BARS ELECTROLTIC GRADE E-91E (80X10MM OR EQUV) (1no)
SITC of 100 AMP DISTRIBUTION BOARD INCOMMER FEEDER 100 A MCCB 4-P MP RELEASE 415V-36KA (1no) EXTENDED ROTARY OPERATING HANDLE(1 no) SPREADER LINKS & PH. BARRIERS (SET OF 8) (1 no) Add On Block ON/OFF/TRIP (03 no) ON OFF INDICATING LAMPS 220V AC LED TYPE SET (3 no) 100/5A, 15VA CL-1.0, CURRENT TRANSFORMER - RESIN CAST/ENCAPSULATED (3no) VAF METER (1no) PHASE INDICATING LAMPS R-Y-B 220V AC - LED TYPE (SET) (3no) C.T. SHORTING LINK (3no) 06A SP 10 KAMCB FOR CONTROL C CURVE (03no) OUTGOING FEEDER MCB 63A TPN 10KA (3no) TERMINAL 63 A(3no) MCB 32 A TPN 10KA (3no) TERMINAL 32A(3no) BUS BAR 150A TPN ALUMINIUM BUS BARS ELECTROLTIC GRADE E-91E (20X8MM OR EQUV) (1no)
Supply installation testing and commissioning of Chemical earthing with 03 meters Galvanized electrode etc as required
Providing and fixing of 10 sqmm copper wire for earthing the pit
Providing and fixing of Heat Shrinkable multi Coloured sleeves and cable end terminations suitable for 630/240 Sq mm
Supply installation testing and commissioining of 3.5 core aluminium armored cable xlpe pvc of voltage grade of 1.1 KV (3.5 core 240sqmm)
Supply installation testing and commissioining of 3.5 core aluminium armored cable xlpe pvc of voltage grade of 1.1 KV (25 sqmm)
Supply, Transportation, Erection, testing and commissioning including loading, unloading and carriage upto 50 mtr, as per REC standards 9 mtr ST Pole ST-410 SP33
Dismentalling of existing 11/9 mtr Steel Tubular pole including loading unloading and manual carriage upto 100 meters as per REC standard and re-erection of the same including the cement bottoming
Providing and laying of Cement Bottoming of ST Poles with 1:2:4 Mix including material and carriage 0.48 Cums for 9 Mtr pole
Providing & Fixing of PG/ T Clapms for 200 mm Sq AAA Conductor
Providing & fixing of Danger Plates with Clamps
Providing & fixing of Anti Climbing Device with Clamps
Providing & fixing of Earthing Complete with GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long threough GI Strip
Providing and painting of 9 Mtr ST poles with two coats of red oxide and two coats of aluminium paint
Providing and fixing of Heat Shrinkable multi Coloured sleeves and cable end terminations suitable for 240 Sq mm
Supply, Installation, Testing and Commissioning of clamps/collers with required insulators for holding 240 sqmm cable on ST poles.
Sheikh Aquib (BID ID -3264753)
Arise Techno (BID ID -3265254)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .