Addn/Altn/Upgradation of Selected Old Md Accn in Army Area Jodhpur

Amount

Taking down steel water tubing and connections, including remove from site all as specified. (a) 15 mm dia

All as per item No 1 above but of 20 mm dia

All as per item No 1 above but of 25 mm dia

Supplying and laying of 15 mm dia CPVC pipes SDR 11 concealed fittings on walls / ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc complete all as specified and directed (removing demolished material outside MD land).

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and as directed.

Form work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete.

M & L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed.

M & L reinforced cement concrete M-25 (design mix ) as in beam, cantilevers , bressummers, lintel overone meter span .

S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S & F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof kerbs rounded or chamfered on edges as specified

Plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping to parapet walls including necessary form work complete all as directed.

Taking down of existing damaged / loosened cement concrete/ brick tiles from roof / terrace to a depth of average 50 mm including taking down of existing APP membrance if any , cleaning with water and depositing of debris to a distance exceeding 50m complete all as specified & as directed by Engineer-in-Charge

M&L Rendering 15mm thick cement mortar 1:4 shall be provided mixed with WPC @3% by weight of cement at green concrete complete all as specified & as directed Note : WPC shall be measured and paid separately.

M&L preparation of plastered surface of roof slab by throughly wire brushing , washed,dried up cleaned all foreign matter and dust and apply one coat of approved bituminous primer @ 0.40 ltr per sqm complete all as specified and directed complete.

M&L for 3mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method over primed surface of roof slab.

M&L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate ) average 40mm thick in padding over old cleaned surface of any description on roof / terrace

Demolition / taking down/ cutting out loose / damaged concrete as in coving/ benching etc of size 100 x 125mm at the junction of roof & walls of any description , cleaning the exposed area throughly with mechanical blower, applying priming coat of Nitobond AR of Fosroc and equivalent of Dr. Fixit) with suitable brush to form a thin film on the surface of groove, filling the groove with putty made by mixing cement, hydroproof extra and river sand in the proportion of 1:0.1:3 and finally applying the sealing coat of same mix as for primer coating Note : Quoted unit rate shall deemed to include for construction chemical

M&L for Endura cool roof SRI tiles of size 300x300mm, 10mm thick of, laid over 15mm thick bedding in cement mortar (1:4), joints grouted and flush pointed in cement mortar (1:3) mixed with 5% crude oil by weight of cement.

Supply only integral water proofing compound ISI Marked all as specified and directed.

M & L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc complete all as specified & directed.

S & F as in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified cap 500 ltr.

All as above but cap 1000 ltrs

Disconnecting of existing 1000/500 ltr capacity PVC tank , seting aside ( or lowering if required ) for repair , cleaning etc. and hoisting and reconnecting and re fixing in position all as directed by Engineer-in-charge .

S & F as in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc.

Taking down cement plaster on brick or stone walls, tiling & ceilings including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for flush pointing on ceiling on Jodhpur stone foor slabe course in CM 1:3 all as specified.

M&L for raised pointing mason's joint as per Fig-05 of section-14 of SSR-Part-I-2009 to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement in CM 1:6.

M&L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished fair & even w/o using extra cement using integral water proofing liquid as per mfr instructions .

M&L for 10 mm thick rendering in CM 1:4 over conc surfaces finished even & smooth as in ceilings

M&L for prep of new ceiling surfces & applying three coats of white wash complete .

M&L for prep of old ceiling surfces & applying one coat of white wash complete .

M&L for prep of new surfces plastered /pointed & applying three coats of white wash complete .

M&L for applying 2 coats of Oil Bound distemper over two coat of birla/jk putty to old/new plastered surface to remove all depressions etc incl sandpapering the surfaces & obtain a smooth surfaces complete all as specifed. The OBD shall be in one or more colours/ shades all as directed by Engg-in-charge.

M&L for prep of old and new surfaces & applying on wall plastered/unplastered two coats of weather coat over a coat of primer complete all as specified.

Demolition of PCC as in flooring, plinth protection etc n. exc. 15 cm thick complete.

Taking down cement plaster including wall tile on stone masonry, RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water

M&L machine cut Udaipur Green marble stone slab 18-20 mm thick mirror polished over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick cement screed bed in CM 1:4 complete all as specified and directed as in steps, cills etc including rounding of edges at nosing.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match .

M&L for double charged light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

All as per item no 49 but skirting includig 10 mm thick rendering in CM 1:4 complete.

M&L for non-skid coloured ceremic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Item no 51 above but skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L of 18-20mm thick KOTA stone slab, machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and mirror polishing .

All as per item No 53 above but skirting/dado including 10mm thick rendering CM 1:4 complete.

M&L for 50 mm thick Cement concrete type C1 -1:3:6 using 20mm graded stone agg as in plinth protection & finishing the surfaxe even & smooth w/o using extra cement

M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding

M&L for 15 mm thick Screed bed or bedding layer of CM1:4 for laying floor finishes .

M&L for 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles.

M&L for coloured Glazed ceramic tiles digital print series in vertical surface 300x450 mm size 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed by Engg-in-charge .

M&L for glazed colour ceramic tiles of size 250x375x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles

M&L for non skid colour ceramic tiles of size( 400x400x7 to 8mm) joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match& all as specified.

M&L for colour ceramic tiles of size joint free area exc 0.11 sqm but nexc 0.18 sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed.

Fixing only 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs. Note:- Gun metal gate valve 20mm bore complete shall be issued under Sch 'B' free for fixing.

Fixing only 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed fixed as in repairs. Note:- Gun metal gate valve 20mm bore complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed. Note:- Bib tap 15mm bore CP complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed. Note Angle stop cock CP 15mm bore complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts. Note :- Central hole basin mixer CP 15mm bore complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs CP wall mixture 3 in-1 system including 1.50m long tele shower and overhead shower of size 150x150mm with W.F. Note:- Wall mixture 3 in-1 CP including 1.5m long shower complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs over head Shower rose 150x150 mm of ABS Body chrome plated with grey face plate & with arm having swivel joint cromium plated best quality. Note:- Over head shower rose ABD Body CP complete shall be issued under Sch 'B' free for fixing.

S&F as in repairs 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout all as per sample Make JAQUAR or equivalent

S&F as in repairs health foucet Make Jaquar ALD-573 or equivalent with 1200mm long flexible mild steel tube 80mm dia with wall hook and complete all as specified and as directed and as approved by GE.

S&F as in repairs two way angle cock cromium plated fancy type 15 mm bore Make JAQUAR or equivalent

S&F as in repairs light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed.

S & F in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve complete

S &F as in repairs Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as directed.

S&F as in repairs stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.50mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as per sample kept in GE's office .

S&F as in repairs Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as per sample kept in GE's office.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks/cills etc & the likes complete laid over 15 mm thick in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .

M&L for rounding of the edges of stone slabs as in cooking platforms all as directed at site .

S&F MS chromium plated peg set of five fixing with wall complete

S&F bath cabinet of PTMT fixed with and including chromium plated brass screws and wooden claeats size 355mmx455 . Make prayag/polytuf or equivalent

S & F in repair Stainless steel ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm complete all as specified & directed (JCOs & ORs).

S/F in repairs of chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.

Fixing only in repair fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore. Note:- Pillar tap fancy type CP 15mm bore complete shall be issued under Sch 'B' free for fixing.

Fixing only in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified. Note:- Stop valve cast copper alloy 25mm dia complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs fancy type , chromium plated anglular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia pipe. Note:- Angular stop cock fancy type CP long body 15mm dia complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs 15 mm dia two way angular stop cock with chromium plated long thread with flange including flexiable chromium plated health faucet 1.5 mtr long complete all as specified and as directed. Note:- Two way angular stop cock CP 15mm dia with heth focut 1.5m long complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified. Note:- Stop cock concealed type CP 15mm dia complete shall be issued under Sch 'B' free for fixing.

Fixing only as in repairs fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm dia bore pipe. Note:- Bib tap fancy type CP 15mm bore complete shall be issued under Sch 'B' free for fixing.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover with jet spray complete incl fixing of flush pipe etc complete all as specified and as directed.

M/L Vitrous china wash basin as in repairs, white flat back size 550x400 mm including , waste fittings, waste pipe, MS brackets complete all as specified.

Fixing only tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed. Note:- CP tubular towel rail 20mm dia complete shall be issued under Sch 'B' free for fixing.

Dismentaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete.

Dismentaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete.

Supplying and laying of 75 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified.(with all fitting)

Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified. (with all fitting)

Supplying and laying of 75 mm dia UPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

Supplying and laying of 110 mm dia CPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

S&F 75 mm bore UPVC bends any radius with oval acess door

S&F 110 mm bore UPVC bends any radius with oval acess door

S&F 75 mm bore UPVC branch piece, single (single Y) equal or unequal with oval acess door

S&F 110 mm bore UPVC branch piece, single (single Y) equal or unequal with oval acess door

S&F 110mm UPVC WC connector with lip ring

S&F UPVC Vent Cowl 75 mm bore

S & F UPVC floor trap, plain with grating including jointing with solvent cement for 75 mm bore pipes

S&F UPVC gully trap 125 mm size setting and jointing with solvent cement

Supply and fixing in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal as per sample kept in GE's office.

Supply and fixing in repair purpose made brackets trade pattern for decorative type curtain rods suitable for holding 22 to 25 mm dia as per sample as in repairs kept in GE's office.

S & F stainless steel railing grade SS-304 including polishing complete all as specified & as directed.

Supply and fixing in repair of decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample kept in GE's office.

Taking down chaukhats with shutters (without taking off shutters from the frames) area nexc 1.50 Sqm & removal to store

Taking down chaukhats with shutters (without taking off shutters from the frames) area exc 1.50Sqm but nexc 4 Sqm

Taking down Shutters of any description exc 1 sq. m each but nexc 2 Sqm each

Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm each and re-fixing in the same opening complete all as specified.

Taking down steel windows/ vents & remove from site complete all as specified.

Supply & Fix Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by engr-in-charge) and Drg No CEJZ/TD/20 Sheet 1/3 to /3

Supply & Fix Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge) and Drg No CEJZ/TD/20 Sheet 1/3 to 3/3

Supply & Fix Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and Drg No CEJZ/TD/24 Sheet 1/3 to 3/3.

Supply & Fix Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and Drg No CEJZ/TD/20 Sheet 1/3 to 3/3.

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

M&L for 2nd class hard wood ,plain ,solid ,straight chowkats and frames , wrought , framed rebated on the solid, rounded or chamfered , put togather with glue pinned at joint supplied and fixed.

M&L for Pressed steel frames for doors 165 x 60mm size fabricated with 1.00mm thick sheet with rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for Pressed steel frames for doors size 105x60mm with one rebate including necessary fixing lugs, hinges, lock strike plate, etc omplete, as specified,supplied and fixed

M&L for PCC 1:3:6 type C1 using 20 mm graded stone agg as in filling under pressed steel door frames & hold fasy blocks etc complete

M & L for 35mm thick flush shutters, solid core construction with block board core and veener face fixed on both side of door, coloured as approved by GE, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S & F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009section 8 clause 8.24 (a) and as directed.

S/F of 35mm thick factory made partly glazed and partly skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing

M&L for Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet incl all edges printed to match the shade reinforced with M.S. Sq tube, suppling & fixing in opening as per spec & drawing

All as per item no.131 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet of size 50X95 mm fixed all as directed.

All as per item no.130 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading

S & F for Anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Mild steel Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm size

S&F Stainless steel butt hinges 100mm size medium wt fixed with steel nut blots in PVC door frames & PVC shutters.

S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty all as per the sample kept in GE's office of Make YANE / EVERBRITE or equivalent.

S &F Anodised Aluminium handles 150 mm size D type with plate

M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,Including opening of AC opening.

M&L for pre powder coated aluminium decogrill all as per sample kept in GE's office fixed to aluminium framework of windows & ventilators.

M&L for pre powder coated aluminium window shutters prepared for sliding or hanging etc complete using section having wt not exc 0.50 kg/RM all as directed & specified

S&F 4.80 mm thick plain Sheet glass tinted , ordinary quality and glazing withsecured in wooden beads or snap fit glazinng clips square exc 0.5 sq. m in each pane

S & F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc ccomplete.

M & L 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

M & L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.

M&L for prep of new steel surfaces & applying 2 coats of syn enamel paint over a coat red oxide primer

M&L prep of new wooded surfaces & applying 2 coats of syn enamel paint over a coat of pink primer.

M&L prep of old painted previously treated wooded surfaces & applying 01 coat of syn enamel paint .

M&L prep of old painted previously treated steel surfaces exc 10 cm width or girth & applying 01 coat of syn enamel paint .

'Excavation in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning filling in ramming earth arround layers n.exc 25 cm watering & removing surplus soil to a distance n.exc 50 mm & making good surfaces in loose /soft soil.

S/F MS angle iron as in fencing post/gate including fabrication for hole for fixing the nut and arrengement for fixing barbed wire.

S/F MS flat iron securing bolts posts and struts in fencing incl holes(for securing wire mesh etc) incl drilling bolting or revating complete all as specified and directed.

S/F mild steel bolts(machine made) with hexagonal or square heads at one ends each screw end to be filled with washers and one hexagonal nuts of 16 to 20 mm dia of shunk.

M/L cement concrete type C2(1:3:6) using 40 mm graded stone agg foundation filling as fixing of RCC fencing post incl form work all as specified & directed incl lean conc of gate pillars.

S&F MS mild steel 10 mm dia round bar cut to length incl straining & welding in horizontal bar for securing chain link fencing all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing & straining & fixing to any type of strandard rails straining bolts incl securing or tying at crossing with & provision of galvanised mild etc.

M&L Painting the Surface of any description , over 10 cm width or girth applying two coat of synthetic enamelpaint over a coat of red oxide primer including prepration.

S&F Pvc coated coloured chain link fencing (Size 25x25 mm) complete all as specified and directed by engr-in-charge

Plaster of Paris of thickness as required but no less than 2 mm thick of 100mm wide fixed as in cornices of ceiling complete all as specified and directed by engr-in-charge, to make undulated and smooth base , on plastered or concrete surfaces of walls complete all as specified and as directed.

All as per item above here-in-before but to surfaces of ceiling.

Exposing existing RCC members such as columns, slabs, lintels, beams, etc. up to the main reinforcement carefully by means of Chisel & hammer, hard wire brushes or any other mechanical means, so as to remove all loose concrete and cleaning the surface to remove all dust particles, etc. and make the surface ready for chemical treatment in bone dry condition.

M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface ready to receive grouts including 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, complete operation all as directed removing the debris out side the MOD land in low lying areas and leveling as directed, complete all as directed by Engr-in-charge. Note (i) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and alloy to dry. To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii) When polymix coating is in tackey condition guniting is done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized dealer. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. (iv) Work shall be carried out up to first floor

All as per item No 164 above but 50mm thick

Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal of the rubbish outside MD land all as directed by Engg-in-charge for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depth nexc 60 cm complete.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.

M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified & directed .

Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide complete

S&F 0 degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters

S&F 75mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple.

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers.

M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil as directed by Engineer-in-charge

M&L for 75 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels all as directed.

S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of ante abrasive rubberised material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

S&F 25-28 mm thick coloured precast cement conc chequered tiles any shape rubberised finish Lacquer coated with top 4-5 mm with anti abrasive material all as per sample laid over 15 mm thick cement sand screeding in Cm 1:4 all as directed at site

S&F machine made precast cement concrete Kerb stone blocks of approved shape size using Cement concrete 1:3:6 type C1 (20mm stone agg) laid alongside paths /hardstanding jointed & pointed in CM 1:4 all as directed by Engr-in-Charge

M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as per drg no CEBZ/TD/12/2008 sht 1/3 to 3/3

Demolition of stone masonry built in cement mortar

M&L for jodhpur type squared rubble regular coursed stone masonry built in CM 1:6 complete

Extra over Jodhpur type stone masonry for hammer dressing to face beds & joints with max depression froom a straight edge not exc 20 mm

S&F 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings,cover stones, & in plinth protection templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4. complete all as specifed.

M&L for Cutting chases in stone walls , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or sunshades, shelves, lintels, etc.; exc 10 cm but nexc 20 cm

M&L PCC 1:2:4 type B1 using 20 mm graded stone agg as in surface channels and drains

M&L for 15 mm thick rendering in CM 1:3 over stone masonry surfaces & finishing even & smooth using extra cement.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover/Main hole cover complete all as specified .

Demolition of RCC as in Downward fascia , Roof projectios, sunshades suspended roof slabs railings etc complete.

M&L for Formwork to soffits of suspended slabs roof/ floor slabs, landings not exceeding 200mm thick incl fair finished surfaces

S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straid portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0

Removing of existing filling in sunken floor o wc/bath/kitchen and repair to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with PC than painting with bitumen 30/40 over a coat of bitumen primer putting 50 micron polythene than filling with pcc 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 50 mm bore GI water pipe light grade spout complete all as specified and directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm thick

Removing excavated material n.exc. 50m at a level n.exc 1.5 m above the starting point complete all as specified.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm dia pipe complete all as specified and directed.

Supply & laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed.

Demolition of Precaste article and PCC block

S&F Pre cast cement cocrete post of size 60cm long 100mmx100mm, 1:2:4 Ty B-1 fixed in CM 1:4 with grooves for fixing of RCC jali

Providing pre cast cement concrete louvres and jali, 35mm thick ( measured solid) incld all moulding, excluding frame, PCC 1:2:4 type B-0 (12.5mm graded agg ) set in CM 1:4 all complete

Cutting into existing manholes for connecting 150 mm new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.

Dismantling of expended metal any thickness or mesh wt exc 4 kg/sqm filled with steel or wood fillets if any complete all as specified.

M&L steel roling shutter thickness of lath 1.25mm with ball bearing as specified including top cover anchoring rod, hasp staple and one shop coat of primer erected in position as indicated complete push pull or manual type.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Taking down carefully UNSV nain switch and DBs including mccb/mcbof any size make type and capacity all as directed.

M & L for point wiring suitable for moduler switch complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked new not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly :- (a) One light point controlled by one, one way switch

All as per item No 206 but for One fan /Exhaust fan, point controlled by one way switch.

All as per item No 206 but for One socket outlet 3 pin 6 Amps on same board

All as per item No 206 but for One socket outlet 3 pin 6 Amp on independent board

All as per item No 206 but for One bell point controlled by one bell push.

All as per item No 206 but for One light point controlled by two, two way switch

All as per item No 206 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

M&L for Point wiring suitable for moduler switch complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for:- (a) One light point controlled by one, one way switch

All as per item No 213 but for One fan point controlled by one way switch.

All as per item No 213 but for One socket outlet 3 pin 5/6 Amps on same board

All as per item No 213 but for One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 213 but for One light point controlled by two, two way switch

All as per item No 213 but for One light point controlled by two, two way switch

All as per item No 213 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked Make : Cona , Anchor,HPL,Leader,Cona

S&F switch flush type single pole one way 16 Amp ISI Marked.Make : Cona , Anchor,HPL,Leader.

S&F switch flush type two way 6 Amp ISI Marked.Make : Cona , Anchor,HPL,Leader.

S&F socket out let ,2-in-1, multi pin , 6 Amp FT.Make : Cona , Anchor,HPL,Leader.

S&F socket out let , 6pin ,16 Amp FT. ISI MarkedMake : Cona , Anchor,HPL,Leader.

supply and fix socket type(2-module)electonic fan regulator flush type , ISI marked.Make : Cona , Anchor,HPL,Leader.

S&F bell push , FT 6 Amp ISI Marked.Marked.Make : Cona , Anchor,HPL,Leader.

S&F electric bell AC 230V , SP , ISI Marked.Marked.Make : Cona , Anchor,HPL,Leader.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated bodyMake : Cona , Anchor,HPL,Leader.

Supply and fixing Modular switch any type and make 6 amp one way 230 V all as specified & directed . Make: Legrand /Anchor/ABB/Sainico.

Supply and fixing Modular switch any type and make 16 amp one way 230 V all as specified & directed . Make: Legrand /Anchor/ABB/Sainico.

Supply and fixing Modular switch two way 6 amp ,230 V all as specified & directed . Make: Legrand /Anchor/ABB/Sainico.

Supply and fixing Modular socket , 6amp 2/3Pin 230 V,2 module all as specified & directed .Make: Legrand /Anchor/ABB/Sainico.

Supply and fixing Modular socket , 16 amp 2/3 Pin 230 V,2 moduleall as specified & directed .Make: Legrand /Anchor/ABB/Sainico.

Supply and fixing Modular fan Regulator step type and make, 100-400 watt , 230 Volts all as specified & directed . Make: Legrand /Anchor/ABB/Sainico.

Fixing only LED tube light fitting 20/22 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable complete all as specified. Note: LED tube light fitting 20/22 watt complete shall be issued under Sch 'B' free for fixing.

Fixing only connecting, and commissioning of street light fitting 30 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified. Note: LED street light fitting 25/30 watt complete shall be issued under Sch 'B' free for fixing.

Fixing only LED batten fittings for LED tube (single side connection) including LED tube 1x10/1x12 watt-01 Nos connected with twisted flexible copper conductor from ceiling rose to connector complete all as specified & directed complete all as specified. Note: LED batten fitting 10/12 watt complete shall be issued under Sch 'B' free for fixing.

Fixing only plastic body ventiare Dx exhaust fan 250 mm sweep with gravity shutter complete. Note:- Exhuast Fan plastic body 250mm sweep complete shall be issued under Sch 'B' free for fixing.

Supply and fix in replacement of sheet metal enclosure SPN with a two pin earth plug and socket with metal cladd top and one MCB,SP 20amps capacity240 volts,'c' series complete all as specified & directed.

Supply and fix AC single phase static energy meter of accuracy class 10 3x240 volt ,50hz with backlite LCD display of rating 10-60A ( measure and display KWH,VI,KW,PF last month history of KWH & MD in KW) with spl features like TOD,Temper logging, optical communication port and display in absency of power incl seal and taking down old one.

M/L in repairs sub main wiring with PVC insulated but unsheathed 2x6 Sq mm single core multistrandred copper conductor cable passing through and in and incl PVC conduit open/concealed as per site requirement, making good the distrurbed surface with and incl 1x6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire including taking down unserviceable. Note :- Two runs of cable 6 Sqmm ,cable including One run of PVC conduit will be measured as one length.

M/L in repairs sub main wiring with PVC insulated but unsheathed 4x6 Sq mm single core multistrandred copper conductor cable passing through and in and incl PVC conduit open/concealed as per site requirement, making good the distrurbed surface with and incl 1x6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire including taking down unserviceable. Note :- Four runs of 6 Sqmm ,and one run of 6 sqmm. cable including One run of PVC conduit will be measured as one length.

Supply,fixing,connecting & testing pre-wired sheet metal enclousers double door, TPN 4 way 415 V,DBs for using MCBs,MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete all as specified and directed. Note : Rates are deemed to be included for flushsing in wall concealed complete making good and matching existing surface

S&F Pre-wired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F Pre-wired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 4 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

Supply and fix distribution panel flush in wall suitable for 415 volts with aluminium bus bar 200 Amp 4 Nos comprising of following including taking down existing panel

Supply and fix distribution panel flush in wall suitable for 415 volts with aluminium bus bar 100 Amp 4 Nos comprising of following including taking down existing panel

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 03 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

S&F MCB TPN 63 Amp, 10 kA, ISI Marked.

S&F RCBO Double pole 40 Amps 100 mA Make Legrand .

Taking down serviceable/Unserviceable , existing Electric Meter any Capacity and refixing the same in position after mainer repair.

S & F in replacment of u/s Street light bracket made out of 50 mm dia medium grade GI Pipe not less than 1.5m length, bent to shape including set of 50 x 6 mm GI 2 Nos Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting all as specified and directed.

Fixing only ceiling fan 1200mm sweep. Note: Fan shall be issued under Sch 'B'.

Fixing only 25 Litre storage type electric water heater.Note: Item shall be issued under Sch 'B'.

ABHOG INFRASTRUCTURE PRIVATE LIMITED

RISING ELECTRICALS

KHETA RAM RAGHUNATH RAM CONST CO PVT LTD

M/s Vishnu Infrastructures

Pioneer Enterprises

Anmol Yash S.D. Construction Pvt. Ltd.

M K ENGINEERS CO.