Repair work of Type 1 residential quaters at PTC Daroh Distt Kangra

Amount

Providing wood work in frames of doors, windows, clerestory windows and other frames Sal wood wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) including carriage of material in all leads and lifts .

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge including carriage of material in all leads and lifts.(Note:- Butt hinges and necessary screws shall be paid separately)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick including carriage of material in all leads and lifts. i) Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked

Providing and fixing 4 mm thick glass pane (weight not less than 10 kg per sqm) ncluding carriage of material in all leads and lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than Grade-AC 10 as per IS:1868), transparrent or dyed to required colour or shade with nuts and screws etc. complete including carriage of material in all leads & lifts. (a) 250x16mm

Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than Grade-AC 10 as per IS:1868), transparrent or dyed to required colour or shade with necessary screws etc. complete including carriage of material in all leads & lifts. (a) 200x10mm

Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than Grade-AC 10 as per IS:1868), transparrent or dyed to required colour or shade with necessary screws etc. complete including carriage of material in all leads & lifts. (a) 125 mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads & lifts

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including carriage of material in all leads and lifts. :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead area 3 sq. metres and below including carriage of material in all leads & lifts.

Digital tiles 6 mm thick (Any size & Any coular) in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads & lifts.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge including carriage of material in all leads and lifts.With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material in all leads and lifts.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of material in all leads and lifts. : One or more coats on old work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including carriage of material in all leads and lifts. (a) New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade including carriage of material in all leads and lifts. Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Renewing glass panes, with putty and nails removal of broken glass panes wherever necessary including racking out the old putty: including carriage of material in all leads and lifts.Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Pankaj Rana Govt Contractor