ARC Tender For P/M/F Weldmesh jali at Different plot in Different Wards in SWZ in AMC (Re-invite)

Name of Work : ARC Tender For P/M/F Weldmesh jali at Different plot in Different Wards in SWZ in

AMC (Re-invite)

Bill of Quantities

Item GST) Amount

No. Description Quantity in Rs. Unit in Rs.

P/M/F Weldmesh jali 5 ft height size as per details

sketch & instruction of engineer in charge consisting of

Hot Dip Galvanised Weldmesh wire 175x50x4 mm, I

section post 75x50x2 mm-2.07 m long, Galvanised

Spoon Clamp -8 Nos per post, S.S.304 Mushrom head

1 Bolt With Anti Theft Nut M8x35 mm-8 Nos per post,

Foundation Size 230x230x550 mm- including

excavation and concrete work and The galvanised

fence panels are subsequently dual powder coated

with minimum thickness of 140 microns to meet C4-

High corrosion protection standards. 1140 2428 Rmt

The rate shall include cost of all types of fasteners

(ETA approved) to be used for fixing.

Contractor shall coordinate all services work (cut-outs

and provisions) in metal work. All cut-out and services

provisions shall be finished at factory/ work shop.

Contractor shall provide PVC/ nylon seprator, where

two different metals connect to avoid galvanic

2 Excavation for foundation up to 1.5 m depth including

sorting out and stacking of useful materials and

disposing of the excavated stuff up to all lead and lift.

(A) Loose or soft soil 10 115.92 cmt

Excavation for foundation from1.5 m upto 3.0 m depth

including sorting out and stacking of useful materials

and disposing of the excavated stuff up to all lead and

3 lift. (A)all sort of soil 10 128.52 Cmt

4 Filling Availabe excavated earth (excluding rock) in

trenches plinth, sides of foundations etc., in layers not

exceeding 20 cm in depth consolidating each

deposited layer by ramming and watering. Refilling in

Trenches 10 129.10 Cu.Mt.

Filling in foundation and plinth with murrum or selected

soil in layers of 20 cm. thickness including watering

5 ramming and consolidating etc. completed. 10 286.20 Cmt

6 Conveyance charges of earth lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregate of any kind etc. comp. upto 5 km lead. 9.97 125.33 CMT

Providing and laying cement concrete 1:5:10 (1-

Cement : 5- fine sand : 10- graded aggregates 40mm

nominal size) and curing complete excluding cost of

7 formwork in (A)Foundation and Plinth 10 2457.01 CMT

8 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

(A) Foundations, footings, Base of columns and Mass

concrete.. 5 3977.88 CMT

(B) Walls, from top of foundation level upto floor two

level 5 4484.17 CMT

(C) Slabs, landing, shelves, Balconies Lintels, Beams,

Girders and Cantilever upto floor two level. 5 4460.36 CMT

(D) Columns, Pillars posts and struts upto floor two

level. 5 4558.20 CMT

9 Providing TMT Bar FE 500 D reinforcement for R.C.C

work including bending ,Binding and Placing in

Position complete upto floor two level 100 75.46 KG

10 Providing and laying in position Ready Mixed M

grade concrete for reinforced cement conctere work

using cement content as per approved

Design Mix manufactured in fully automatic batching

plant and transported to site of work in transit mixer for

a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of

transit mixer to site of laying, excluding the cost of

centering shuttering finishing and reinforcement

including cost of admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without

impairing strength and durability as per direction of

the Engineer - in - charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained) 5 4793.10 cu.m

11 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns, Mass

concreteetc. and Vertical surface such as walls (any

thickness) Sides and soffits of Beams /Column anc

Coping Beam and .etc.any size & depth 5 171.68 Sq.mt

12 Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional Brick Work 5 4011.66 CMT

13 Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4(1-cement

:4-sand). For Ground Floor 5 155.61 Sq.mt.

14 20mm thick sand faced cement plaster on walls upto

height 10 metres above ground leve consisting of

12mm thick backing coat of C.M. 1:3 (1- cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete 5 297.68 Sq.mt.

15 Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws

(A) Plain Grill. 90 100.17 Kg

16 Provinding and fixing chicken wire mesh of gauge

mm and 0.20 mm wide with necessary screws and nail

at joints cracks of brick work R.C.C work as per

drawing and specification and direction of Engineer

incharge. 100 43.00 Sqm

17 Labour charges for writing of capital letter "AMC" in

green plaster of 30 cm height,25 mm thick and 12 mm

embossed as per given detail in outside of compound

wall as instructed by Engineer in charge. 5 223.21 No

18 Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete. 50 113.40 Sq.mt.

19 White/colour washing with lime on wall surface (two

coats) to give an even shade including thoroughly

booming the surface to remove all dirt, dust;

mortar drops and other foreign matter. 50 12.29 Sqm

20 Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 50 86.94 Sq.mt.

21 Providing & Supplying JCB Machine on rental basis in

case of emergency situation and break down type

work & also during unavoidable condition as per

instruction of engg. in charge, rate includes all nece.

shifting, fuel and operating charges and stacking of

useful & non-useful materials separately up to store.

(No payment should be allowed for non working

condition of machinery and for pipe line excavation

and laying work) 5 600.00 Hour

22 Structural steel work ( Confirming to IS 4923- 1997)

riveted, bolted or welded in builtup for all type sections,

in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel

primer all complete as per the structural designs and

directions of Engineer in charge. Safety grills/doors of

required pattern for windows / Door/ ventilators using

M.S. flats/bar/box sections as per design and drawing

including one coat of primer. 150 126.68 Kg

23 Supplying Electric Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site by using Operator,

fuel, power Supply etc. Complete as Directed. (No

payment should be allowed for non working condition

of machinery and for pipe line excavation and M.H.

work.Allowed only for break down work) ( Based on

Previously approved rate by C E sir ) 5 600.00 shift

I/We am/are willing to carry out the work at % above/below % (should be written

in figures and words below/above the estimated rates mentioned above. Amount of my/our tender works out as

1) % above / below is to be submitted online only.

2) All work shall be carried out as per the specifications or as directed.

3) Rates quoted include cleaning of site (prior to commencement of work and at its close)

in all respects and hold formwork under all conditions, site moisture, weather, etc..

All the item rate are considering excluding cost of GST as per Government of Gujarat Road And Building Dept.

Reso. No. TNC/102022/457/C Dt.05/04/2022. So, bidder shall be consider this change in BOQ.

Seal and Signature of the Bidder Addl. City Engineer

(SOUTH WEST ZONE)