Restoration of Rain Damages to LIS Majhyathal in Tehsil Balh Distt. Mandi (H.P).

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. Group C.

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface / recessed PVC point with 1.5 Sq.mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface / recessed PVC conduit alongwith 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

2 x 1.5 Sqmm.

2 x 4.00 Sqmm.

Supplying and fixing following rating Piano type Switch / Socket on the existing switch box / covers including connections etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

5/6 Amps. One way switch piano type.

15/16 Amps. One way switch, porcelain base/ piano type.

5 pin 5/6 Amps. Socket outlet, porcelain base/ piano type.

6 pin 15/16 Amps. Socket outlet, porcelain base/ piano type.

Supplying and errection of 6 Amps to 32 Amps rating, 10 KA breaking capacity, 240 Volts 'C' curves, miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. Cat - A. (Single Pole)

Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with linner copper busbar wire set, neutral link, earthbar, din-bar, detachable gland plates, blanking plate, cable identification tables, inter connections phosphatized and powder painting including earthing etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. Single door 12 Way

"Providing, installation, testing and commissioning of ceiling fan with electronic regulator i/c wiring the down rod of standard length (upto 30 Cm with 16/0.20mm twin twisted flexible, cotton braided, copper cable including providing and fixing phenolic laminated sheet cover the fan box and earthing etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. Ceiling fan 1200 mm sweep category A Bajaj Pride"

Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. 1 x 36 watt-FTL (T8) (Category-A)

Providing and fixing H.D Pannel 15 HP complete job with connection, thimbles, bolts etc. complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing and installation LED street light Havells make 50 watt complete job with stand, hanging service wire connection with switch as required complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing and fixing MCB 63 AMP Havells make complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing and fixing contact point set MEI starter 25 HP moving and fixed complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing, supplying and fixing Kit Kat 500 Amp both side terminal type complete job with nut and bolts complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing and supplying copper fuse wire 16 gauge (for 500 Amp Kit-Kat) complete job in all respect in all leads and lifts as per direction & best satisfaction of the Engineer-in-Charge.

Providing and fixing MCCB 100 Amp Havells make complete job in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Opening, drying and cleaning from silt and dust motor stator by petrol and dryer of site and assembling, fixing on foundation and connection complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing and changing Ball bearing high speed 6310 SKT-CF-3 complete job in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Change of connection cable 25 Sqmm from motor to starter and terminal with copper thimble complete job in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Providing and fixing Foot valve butterfly type 80mm dia complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge.

Please Enable Macros to View BoQ information