Construction of Office Building of Child Development Project Officer and Tehsil Welfare Officer at sarahan Distt Sirmour HP

Amount

Cutting in earth work through mechnical means in all heights/depths and in all kinds of soil such as kankar, moorum, shingle and decomposed of soft or hard rock i.e. their intermediate classification of soil & chiselling/wedging out rock where blasting is prohibited including saturated soil and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads & lifts through mechanical transporation. Any damage to the private / public property during execution will be restored by the contractor whatsoever the nature of the same may be.The serviceable materials will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work and chiselling / wedging out of hard or soft rock where blasting is prohibited up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth in all leads and lifts as directed by the Engineer-in- charge.

Excavation in earth work in all kinds of soil work such as pick work jumper work , chiseling /wedging out of hard or soft rock where blasting is prohabited and disposal of all excavated earth upto all leads and lifts disposed earth to be levelled and neatly dressed as directed by the Engineer in charge.

Excavation in drains and channels etc.in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed in pick and Jumper work including carriage of material in all leads and lifts

Filling in plinth with sand under floors including watering,ramming, consolidating and dressing complete with cost of sand including carriage of material in all leads and lifts

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Foundation, footing bases of columns etc. and mass concrete.

Columns, pillars, posts and struts square, rectanagular or polygonal in plan.

Circular or curved in plan upto all heights.

Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like: (i) Floors, etc. upto any in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses,plinth and string courses and the like.

Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels of any depth.

Stair cases with sloping or stepped soffits excluding landing.

Edges of slabs and breaks in floors and walls under 20cm wide.

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab & floor excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab & floor in depressd portion excluding cost of form screed laid under floor including carriage of materialin all leads and lifts.

Providing and laying upto floor two level cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete including form work in String courses coping bed plates, anchor blocks plain window sills and the like including carriage of material in all leads and lifts.

Applying a coat of hot bitumen (mexphalt 80 / 100 or equivalent) using 1.70 kg per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of material in all leads and lifts.

Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.

Foundations, footings, bases of column and the like and mass concrete.

Walls (any thickness but not less than 0.10metre thickness) including attached pillasters buttresses,plinth and string courses etc. from top of foundation upto all floor level.

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Column, pillars, posts and struts upto all heights

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights.

Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface, centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.

Providing and laying Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Providing throating, or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth upto all depth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level upto all height in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.

Stone filling behind retaining wall including carriage of material in all leads & lifts.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position including carriage of material in all leads and lifts. 1st class Kail wood

Providing and fixing 10mm thick Eco -pinewood panelling on Walls with necessary screws complete in all respects including carriage of material in all leads and lifts

Providing and fixing 10mm thick Eco -pinewood panelling on ceiling with necessary screws complete in all respects including carriage of material in all leads and lifts

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. including carriage of material in all leads and lifts.

For doors,windows ventilators and glazed partitions Frames.

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provisions for fixings of fittings wherever required including cost of PVC/Neoprene gaskets required (fittings and glazing/paneling shall be paid separately) including carriage of material in all leads and lifts.

Providing & fixing 8mm thick both side laminated partical board/MDF board in Aluminum doors shutters, and partitions etc i/c necessary hinges with PVC/Neoprene gaskets etc. complete as per Architectural drawings and the directions of Engineer-in-charge including carriage of material in all leads and lifts.

Providing & fixing fly proof galvanised M.S Wire gauge of IS-gauge designation 85G with wire of dia 0.56mm in aluminium door & window shutters with required beading etc. complete as per Architectural drawings and the directions of Engineer-in-charge with 19x4mm M.S. Flat (cost of aluminium shutters & snap beading etc. shall be paid in basic item of shutter) including carriage of material in all leads and lifts.

Providing & Fixing glazing in Aluminum doors, windows,ventilators shutters and partitions etc.with PVC/Neoprene gaskets etc.complete as per Architectural drawings and the directions of Engineer-in-charge(cost of aluminium shutters & snap beading etc. shall be paid in basic item) 5.50mm thickness weight not less than 13.75Kg/Sqm including carriage of material in all leads and lifts..

Providing and fixing aluminium grill anodised pattern to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately)including carriage of material in all leads and lifts.

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of material in all leads and lifts. 1st class deodar wood.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc complete including carriage of material in all leads & lifts.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. including carriage of material in all leads & lifts.

Providing and fixing anodized aluminium floor door stopper with necessary screws etc. complete including carriage of material in all leads and lifts.

Providing & fixing anodized aluminium hook & eyes with necessary screws or welding to chowakat including carriage of material in all leads and lifts.150mm.

Providing & fixing hydraulic door closer as per sample approved by the Engineer-in-Charge with necessary screwes etc.complete.including carriage of material in all leads &lifts.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors including carriage of material in all leads &lifts.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material in all leads &lifts.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material in all leads &lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of material in all leads &lifts.

Providing and fixing 6mm thick ply wood lining with butt jointing and nails ( frame work and cover fillets to be measured and paid for separately)including carriage of material in all leads & lifts.

Providing and laying (double charged) Duro stone of any size and colour, thickness not less than 10mm Vitrified tile in flooring treads of steps landing laid on a bed of 12mm thick cement mortar 1:3(1 cement:3sand) laid over and jointed with neat cement slurry mixed with pigment of required shade o match the shade of tile completefinished with flush pointing in white cement.The shade & sample to be approved by the Engineer-in-Charge including carriage of material in all leads and lifts.(Nitco,Kajaria or Orient Make) i/c cost of cutting the tiles whereever required including carriage of material in all leads and lifts

Providing and laying Duro stone vetrified tiles of any size and colour, thickness not less than 8mm in skiring, risers of steps and dados upto all heights on f 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. The shape and sample to be approved by the Engineer-in-Charge i/c cost of cutting tiles whereever required i/c carriage of material in all leads and lifts.(Nitco,Kajaria or Orient Make)

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles of any size and colour manufactured of approved shade and design of NITCO, NTC, GICO,Kajaria in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of cutting tiles wherever required including carriage of material in all leads & lifts.

Providing & fixing digital glazed tile 6mm thick of any size and any colour as per sample approved by the Engineer-in-Charge i/c cost for cutting the tiles where required in skirting, risers of steps and dado upto all height on 12mm thick cement mortar 1:3 (1cement:3 sand) & jointed with cement slurry i/c carriage of material in all leads and lifts (Nitco,Kajaria or Orient Make).

Providing & laying granite stone (close grained rounded at edge)in flooring,skirting riser of steps & dado 20mm (average) thickness base of cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing & polishing complete 20mm thick including carriage of material in all leads & lifts.

Providing and laying heavy duty precast cement concrete inter locking paver block vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement morter 1:4 (1 cement: 4Sand)laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (sub base concrete floor to be paid for sepereatly 60mmthick Precast inter locking blocks as per sample approved by the Engineer-in-Charge including carriage of material in all leads & lifts.

Providing & fixing stainless steel railing in staicase incuding fixing in position complete as per approved design by the Engineer-in-Charge i/c carriage of material in all leads and lifts.

Providing & fixing stainless steel 3" dia vertical post in staircase as per sample approved by the Engineer-in-Charge i/c carriage of material in all leads and lifts.

Cement concrete flooring 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts.50 mm thick

Providing and fixing unistone cladding on external surfaces of wall in cement morter 1:3(1 cement :3 Sand)of any size and colour/ shade as per sample approved by the Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over, 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer - in - charge i/c carriage of material in all leads & lifts.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerincharge and as per manufacturer's specification, with all 4 side tapered andbacked by acoustical tissue with NRC value not less than 0.60 including carriage of material in all leads and lifts

Providing & fixing ridges or hips 60cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating (+) back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer - in - charge including carriage of material in all leads and lifts.

Providing & fixing Valley 60cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 micron over 5 micron primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I. limpet & bitumen washer complete with all accessories as required as per the direction of Engineer - in - charge including carriage of material in all leads & lifts.

Providing and fixing flushing 38cmoverall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I.limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. including carriage of material in all leads & lifts.

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design including carriage of material in all leads and lifts 0.63mm. thick sheet.

Extra for making opening or receses in plain G.I. sheet of girth not more than 1 metre including carriage of material in all leads and lifts. Upto 100sq.cm in area.

Providing & fixing on wall face PVC (D-Plast)Rain water pipe, clamps whereever required including fittings the joints with approved adhensive including carriage of material in all leads and lifts (i) 100mm Diametre.

P/F on wall face PVC (D-Plast) accessories for rain water pipe i/c filling the joint with approved adhensive complete including carriage of material in all leads and lifts.

PVC Plain bend 100mm diameter .

PVC Plain shoe 100mm diameter.

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

In gratings framed guard bars, ladders, railling, brackets and similar works i/c making holes & filling the same with cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20mm nominal size).

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carriage of material in all leads and lifts.

Providing and fixing MS BP sheet 1.66mm to 2mm thick in eaves board/ facia/ soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in- charge ( Base member of steel work shall be measured and paid for seperately) including carriage of material in all leads and lifts.

Painting two costs (excluding priming cost on new steel and other metal surfaces with enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters including carriage of material in all leads and lifts. Enamel white paint/ other than white

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts.

6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.

20 mm cement plaster in single coat on rough side of brick / stone masonry for interior/exterior plastering upto all heights including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth including carriage of material in all leads and lifts.

in cement mortar 1:6 ( 1 cement : 6 sand)

in cement mortar 1:4 ( 1 cement : 4 sand)

Extra over item No.68 for finishing with a floating coat of neat cement slurry. including carriage of material in all leads and lifts.

10mm cement plaster in single coat on fair side of brick /stone masonry for interior /exterior plastering upto all heights including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girths and finished even and smooth in cement mortar 1:3(1cement :3sand).including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces/ ceiling or sloping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including carriage of material in all leads & lifts. (a) Priming coat with distemper primer. (Asian paint (Tractor Acrylic)

On Wall.

On Ceiling.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit/G.I pipes and filling the same with cement concrete 1:3:6(1cement: 3sand: 6 graded stone aggregate 20mm and dowen gauge ) after the conduit / G.I pipe is laid.(excluding the cost of pipe) including carriage of material in all leads & lifts.

Constructing course rubble hammer dressed "U" shape open surface drain with side wall 15x22 cm in cement mortar 1:6(1 cement:6 sand) and in side plastering with cement mortar 1:3(1cement : 3sand) including earth work and laying 10 cm.cement concrete in 1:5:10(1 cement :5sand:10 graded stone aggregate 40 mm.nominal size) and 7.5 cm cement concrete 1:2:4(1 cement :2 sand:4 graded stone aggregate 20mm. nominal size ) and finished with a floating coat of neat cement complete as per standard design. including carriage of material in all leads and lifts

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)including carriage of material in all leads and lifts

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Brick edging (Brick laid on edge) to plinth protection with bricks including grounting with cement mortar 1:4 (1 Cement : 4 Sand) including carriage of material in all leads and lifts. With modular bricks size 19 cmx9 cmx9 cm.

Providing and fixing to wall ceiling and floor (ISI marked) galvanised mild steel tubes (medium grade)i/c tube fittings and clamps including making good the wall, ceiling and floor including carriage of material in all leads and lifts: JINDAL / TATA Make

15 mm nominal bore

20mm nominal bore

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts: (JINDAL/ TATA MAKE).

Constructing chamber 600mm X 450mmX600mm inside sizes for water meter complete with C.I. double Flap Surface box 400mmX 200mm X200mm (inside) with locking arrangments and RCC top slab 1:2:4 mix (1 cement:2 sand:4 graded stone aggregate 20mm nominal size )100mm thick foundation concrete 1:5:10(1cement:5 sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1cement:3 sand) finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.(a) With 115 mm thick walls brick masonry in cement mortar 1:5(1cement:5 sand)

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1cement: 1sand)plastic seat & cover to be measured & paid for separately confirming to BIS specification Including carriage of material in all leads & lifts (a) Ordinary closet (Universal Closet).Hindware/ Cera make.

Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)including carriage of material in all leads and lifts Hindware/ Cera make.

Providing and fixing plastic seat (solid /Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers:- including carriage of material in all leads & lifts. (a) White/coloured plastic seat and cover

Providing & fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads & lifts. Hindware/ Cera make.:-(a) Flat back 560mmx400mm

Providing and fixing Vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads & lifts.

Providing & fixing C.P. brass waste for wash basin or sink including carriage of material in all leads & lifts. 32mm dia

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of material in all leads & lifts.

Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws. Including carriage of material in all leads and lifts.600mmx20 mm

Providing and fixing PTMT Jet spray of approved quality & colour with 1.50 metre tube including screws etc. complete in all respect 15mm dia incliding carriage of material in all leads & lifts.

Providing and fixing 600mmx120mm glass shelf with C.P. Brass brackets and guard rail complete, fixed to wooden plugs with C.P. Brass screws. Including carriage of material in all leads and lifts.

Providing and fixing toilet paper holder including carriage of material in all leads and lifts.(a) C.P. Brass

Providing anfd fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats/PVC plug with C.P. brass screws Including carriage of materia in all leads and lifts.

Providing and fixing C.P. Brass bib tap with capstan head short/ long body including carriage of material in all leads and lifts.15mm dia Long Body

Providing and fixing C.P. Brass pillar tap with capstan head including carriage of material in all leads and lifts.15mm dia

Providing and fixing C.P. Brass angle valve 15 mm without/with nuts Including carriage of material in all leads and lifts.15 mm dia

Providing and fixing 15 mm C.P. mixer for kitchan sink with top/ bottom swinging spout Including carriage of material in all leads and lifts.

Providing and fixing PVC connection pipe Including carriage of material in all leads and lifts.(a) 15mm dia 45 cm. length.

Providing and fixing brass full way valve with wheel Including carriage of material in all leads and lifts.

15mm nominal bore

20mm nominal bore

40mm nominal bore

Providing and fixing G.I./M.I Union of following sizes (Where not included in the items.Including carriage of material in all leads and lifts.

15mm nominal bore

20mm nominal bore

40mm nominal bore

Providing and fixing Polythene water storage tank Sintax make for storage of water upto all heights keeping water hygenic & safe for drinking etc. moulded to seamless perfection from FDA approved grades of polythene (LDPE/ HDDE/CLDPE) to BIS-12701-1989 with 40 mm no,minal bore galvanised steel scour with fittings 25mm nominal bore galvanised mild steel overflow tubes tube with fittings and mosquito proof coupling of approved municipal design, 15 mm nominal bore ball valve and mosquito proof galvanised coupling including provising pads of sizes as required and complete tubes as per directions of Engineer-in-Charge including carriage of material in all leads and lifts (a)1000 litres net capacity storage tank of ISI marked sintex make with double layer including MS Stays for water storage tank.

Providing and fixing (ISI marked) PVC floor trap of self cleaning design i/c fixing with approved adhensive with C.P. screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material in all leads and lifts.110x90 mm

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipe ISI marked i/c fixing with approved adhensive (i/c PVC clips where ever required) including carriage of material in leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing PVC Plain bend ISI marked complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

P/F PVC Single equal branch ISI marked of required degree with oval access door insertion rubber washer 3mm thick bolts and nuts complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing PVC Collar i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

Providing and fixing (ISI marked) PVC cowl i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing M.I Union for Wash basin & Sink Including carriage of material in all leads and lifts. 32mm nominal bore

Providing and fixing PVC waste pipe for Wash basin & Sink Including carriage of material in all leads and lifts. 32mm nominal bore

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts(i) 610mmx510mm with bowl depth 200 mm

Providing and fixing stoneware gully trap grade 'A' complete with C.I. grating, C.R. masonry in cement mortar 1:6 chamber and water tight C .I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.78kg including carriage of material in all leads and lifts(i) Square mouth trap 100mmx100mm size p type

Providing and laying cement concrete 1:4:8 with 15% plams and curing complete including the cost of farmwork for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300 mm as per drawing and HP.PWD technical specifications i/c carriage of material in leads and lifts: 25mm nominal bore/ stone/concrete

Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs depth of cutting (i) Holes upto and including 400 sqcm in area including carriage of material in all leads and lifts

Providing and fixing vitreous China floor mounted urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) including carriage of material in all leads & lifts

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material in all leads & lifts.

Supplying and fixing S.F.R.C. cover with frame for manholes/Septic tank of 560mm internal diameter (medium duty)the total weight of cover & frame to be not less than173Kg the weight of cover 70 Kg and weight of frame 103 kg i/c carriage of material in all leads & lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng i/c carriage of material in all leads & lifts. Inside size 800x800x 500mm deep including S.F.R.C. frame and cover medium duty 560mm internal diametre the total weight of cover & frame to be not less than 173kg(weight of cover 70kg & weight of frame 103kg (a)With 230mm thick walls of brick masonry using common burnt clay building bricks in cment mortor 1:3(1 cement :3sand)

Providing and laying (to level or slopes) and jointing reinforced concrete light duty) non- pressure pipes ISI Class NP.2 or P of the following internal diametres with collars and butt ends prepared for collar joint including testing of joints complete including carriage of material in all leads & lifts. 150 mm dia

Construction of soak pit as per standred design 2.50 mtr. Dia and 3.00 mtrs. Deep made with brick bats and dry brick honey comb shaft as per design/ specifications. including carriage of materialin all leads & lifts.

Providing and fixing sand cast (spun) cast iron spun spigot and socket soil waste and ventilating pipes confirming to BIS specification(lead caulked joints to be measured and paid for separately) i/c making good the wall ceiling and floor including carriage of material in all leads & lifts.(a) 100 mm nominal size.

Providing and fixing sandcast iron cowl confirming to BIS Specification including carriage of material in all leads & lifts.(i) 100 mmnominal size

Providing and fixing 200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes/ septic tank with 200 mmx200x100mm cement concrete 1:3:6 ( 1cement: 3 sand: 6 graded stone aggregate 20 mm nominal size)including carriage of materialin all leads & lifts.

Providing and fixing M.S. stay and clamp for sand cast iron/ cast (spun) iron pipes including carriage of material in all leads & lifts. i) 100 mm nominal size

90 mm nominal size

110 mm nominal size

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap i/c carriage of material in all leads & lifts.

Providing and fixing all socket C.I. Tee(medium class) of nominal diameter 100x100 (27 Kg) i/c carriage of material in all leads & lifts.