REPAIR TO ROOF TREATMENT JOINERY SANITARY FITTINGS ROOF SHEETING FLOORING PLASTERING SINK CUPBOARD UTENSIL RACK AND OTHER MISC WORKS IN OTM ACCN ZONE C AND MD ACCN ZONE C AND CENTRAL INSTITUTE AT ALHILAL MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.

S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.

S&F framed work as in doors or gates of angle (75x75x6mm) or other section with gusset plates,rails, braces, etc., complete,drilling for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rail and guides) and hanging;also fastening and fixing conform to Fe-290 Gde E-165 complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter adn fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws complete all as specified and directed. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 35mm thick single piece factory made wire gauge shutter and incl of wire cloth (stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, 19x19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay dovetailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.

M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21 complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300mm long mild steel ordinary door springs including roller and roller plate complete all as specified and directed.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F powder coated aluminium door/window shutter (powder coating of any colour and thickness not less than 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing two number of aluminum handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21, 100mm long, anodised aluminium snap beading, screws, aluminium fittings complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane including solar control film 25 micron reflective type (gareware sun control or equivalent) sticked to glass panes complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete as specified and directed.

S&F 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard/kitchen cabinet shutters and frames having high natural fiber control 25 to 30% wood colour sheets with density not less than 500 Kg/cum and weight of sheet of 1 Sqm should be 11 Kg (+/-5%) manufactured by ISO 9001-2015 certified company. The sheet should be 100% water proof, termite proof, fire retardant, manufactured by single layer extrusion process with excellent screw as directed.

S&F Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square/rectangular, wrought face of sectional area exc 13 & not exc 25 sqcm, securing with screw complete all as specified and directed.

S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed.

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finished complete all as specified & directed.

Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets complete all as specified and directed.

S&F Hi steel clip in false ceiling system plain/perforated with steel/aluminium tiles (600x600mm) manufactured out of 0.50mm thick polister coil coated galvanized steel having 120/180 grams zinc coating or 0.70mm aluminium powder coated with 0.50 micron polyester paint in AA5050, AA3105 or AA1050 aluminium alloy. Tiles shall have square or bevelled edge, coil coated steel tiles shall have 20 micron polyester coated finihsed or on the front side back side coat of 5 micron alkyd primer, two side of each tile are raised and piped and stopped to ensure positive engagement in to spring clip in profile allowing for demounting of individual tile i.e. rigid suspension system consist of row of 0.50mm galvanized steel clip in profile of 38mm installed at 600mm centre to centre a spacing to support the tiles suspension angle are suspended from roof structure/truss by GI ceiling bracket these are jointed clip profile by hold on clamps. The tiles/planks are held in place by pressuring clips. In the flexible system hanger and butter fly clip replaced the suspension angle wall angle shall be of size 24mm x 24mm x 0.40mm thick made of coil coated steel or aluminium matching the colour of tiles including necessary scaffolding all as specified.

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts in lieu of screws fixed with coach screws and washers, in roof, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63mm thick plain, galvanised mild steel sheeting in ridges, hips valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe 410-W (Grade E-250) quality B complete all as specified and directed.

S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410 W(Gde-E-250) quality-B, complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in cement mortar 1:4 finished the surface even and fair without using extra cement using WPC compound as per manufacturer's instructions complete all as specified and directed.

Rendering 10mm thick plaster on fair faces of brick work/stone masonry, concrete surface in cement mortar 1:6 finished the surface even and fair without using extra cement complete all as specified and directed.

Rendering 5mm thick plaster on ceiling in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification two or more coats on new work, over a coat of wall care putty 1mm thick complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls and applying two coats of distemper, white or tinted, over a coat of wall care putty 1mm thick complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of old plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Disconnecting existing tanks of capacity 250 & not exc 500 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt,etc,from tanks and from moulds of circulating pipe,etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling of tank complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, incl taking down complete all as specified and directed.

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, incl taking down complete all as specified and directed.

S&F steel water tubing, 25 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, incl taking down complete all as specified and directed.

Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting exc. 10cm but not exc. 20 cm girth complete all as specified and directed.

S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius with old size bricks, built in Cement mortar 1:6, complete all as specified and directed.

All as per Srl item No. 69 here-in-above but except brick.

M&L walling of random rubble, un-courses, well bonded bedded & solidly hearted built in cement mortar 1:6, complete all as specified and directed.

All as per Srl item No. 71 here-in-above but except stone.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, incl dismantling complete all as specified and directed.

M&L Non-skid, joint free (edge cut) coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in leveling course of flooring & roof complete all as specified and directed.

Dismantling of stone slabs,paver blocks and tiles of any description or thickness in floors,path apron etc laid dry or laid dry and pointed surface complete all as specified and directed.

M&L coloured parking tiles size 400mm x 400mm x 12mm laid in floor or wall over 15mm thick screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed.

M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 50 mm thick layer of sand cushioning, complete all as specified and directed .

M&L 18 to 20mm thick granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone incl grinding and polishing complete over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in sub base of interlocking/tiles complete all as specified and directed.

M&L 75mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in plinth protection/footpath finished the surface even and smooth without using extra cement complete all as specified and directed.

S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.

S&F in repairs stop valve/angle valve, fancy type, cast copper alloy, chromiun plated, screwed down, high pressure, with quarter turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F in repairs vitreous china wash down Europian water closet pan (Padestal Pattern), white including connection to flush pipe, 'P' or 'S' trap and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing complete all as specified and directed.

S&F vitreous chinaware squatting pan, 'Orissa pattern' size 580mm x 440mm, with cast iron 'P' or 'S' trap, front or back inlet, integral foot rest with provision of PCC M-15, type B-1 using 20mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe etc and making good to floors to match existing, in repair, complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.

S&F in repairs one piece EWC (of any colour as directed) of size (640x350x720mm) with slim soft seat cover and twin flush, fittings, P trap complete all as specified and directed. Make: Cera, Parryware, Prayag and equivalent make as approved by GE.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs oval (of any colour as directed) counter wash basin of size 560x470x205mm including CP coupling and waste pipe complete all as specified and directed.

S&F in repairs Sink cock (wall mounted) with 150mm (6") long swivel spout and wall flange complete all as specified and directed. Make: Cera, Parryware, Prayag or equivalent make as approved by GE.

S&F Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm size with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed.

M&L water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris as specified and as directed (b) Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) (c) Preparation & cleaning of fully dried cement concrete surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric.The over lap shall be minimum 75mm in length side and 100mm with side. Application of polymeric membrane shall be by torch application as specified and as directed.

M&L 15mm thick plaster on fair faces of concrete surface in CM 1:3 to be finished even and smooth without using extra cement under roof treatment mixed with water proofing compound as per manufacturer's instructions complete all as specififed and directed. Note: WPC compound shall be measured and paid seperately.

M&L plain cement concrete, M-15 (Nominal Mix), type B-0, (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding etc using water proofing compound as per manufacturer's instructions complete all as specififed and directed. Note: WPC compound shall be measured and paid seperately.

S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed etc. complete all as specified

S&F 140mm long floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repairs PVC coated mild steel conduit pipe 25mm dia (Drapery rod) including with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod complete all as specified & directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Repair to aluminium door/windows replacing worn out members/panel/glass pane/rubber gasket, securing all members and make it functional complete all as specified and directed.

Repair to rolling shutter by greasing the members, replacing ball bearing, spring, straighting guide channels and make it functional as directed.

Repair/securing of grid ceiling any description incl tightening of members and repair/replacement of suspenders where required and replacement of any description sheet to match with existing complete all as specified and directed.

S&F in repair heavy duty plastic collapsible waste pipe complete all as specified and directed.

S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed.

Repair/securing of CGI/PGI prepainted galvalume sheets of any description and of any height with 'J' or 'L' hookds or machine screw as required complete all as specified and directed.

M/S Bharmouri Construction (BID ID -3292436)

somyaenterprises (BID ID -3296275)

VIVEKA ENTERPRISES (BID ID -3291760)