Urgent leak rectification works

Amount

Leak rectification works

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes as per specification and as per the dirction of Engineer-in-Charge.

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work as per specification and as per the dirction of Engineer-in-Charge.

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.as per specification and as per the dirction of Engineer-in-Charge.

od33209/2021_2022/P2 : taking out old damaged rolling shutter as per the departmental offires at site.as per specification and as per the dirction of Engineer-in-Charge.

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)as per specification and as per the dirction of Engineer-in-Charge.

od32762/2021_2022/P2 : Most urgent electrificaton works including cost of materials and labour charges as per specification and as per the dirction of Engineer-in-Charge.

50.2.33.5 : Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.as per specification and as per the dirction of Engineer-in-Charge.

50.2.33.6 : Cutting branches of trees overhanging above any structures of girth between 60cm to 90cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete as per specification and as per the dirction of Engineer-in-Charge.

od33329/2021_2022/P2 : Labour engaged for cleaning the roof top as per specification and as per the dirction of Engineer-in-Charge.

od34629/2021_2022/P2 : Painting with damp proof ultra ( smart care damp proof ultra Asian paint/similar brand)as per specification and as per the dirction of Engineer-in-Charge.

od33331/2021_2022/P2 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete.Details of cost for 10 sqmLABOUR as per specification and as per the dirction of Engineer-in-Charge.

13.81.2 : Dis tempering with Ist quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams /litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats as per specification and as per the dirction of Engineer-in-Charge.

13.82.2 : Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats as per specification and as per the dirction of Engineer-in-Charge.

od34917/2021_2022/P2 : Finishing with synthetic enamel paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel/wood work as per specification and as per the dirction of Engineer-in-Charge.

od32763/2021_2022/P2 : Supplying Desktop (19'') 10th generation i3 processor,8GB RAM AND UPS for division office as per specification and as per the dirction of Engineer-in-Charge.

od32876/2021_2022/P2 : Supply and fixing of photostat machine multifunction monochrome laser printer KONICA MINOLTA Bizhub 165en or similar brand as per specification and as per the dirction of Engineer-in-Charge.

50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete as per specification and as per the dirction of Engineer-in-Charge.

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).as per specification and as per the dirction of Engineer-in-Charge.

od34804/2021_2022/P2 : Maintenance works of water supply and sanitary items and other unforseen items as per specification and as per the dirction of Engineer-in-Charge.

ANIMON G K

Bidder Name

ANIMON G K

Baby Thomaskutty