WELCOME MAINTANANCE FOR MD AND OTM ACCN AT OFFICERS ENCLAVE AT AIR FORCE STN PHALODI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premisses complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick rendering in CM (1:3) , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for screed bed or bedding layer of 15mm thick in cement mortar (1:6), for laying floor finishes complete all as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exc 0.36 sqm , over 15 mm thick screed bed CM (1:6),in floors etc set and jointed in neat cement slurry and pointed in white cement slurry and pointed in white cement or coloured cement to match the shade of tiles complete all as specified and directed.

All as per Srl item No. 5.00 (here-in-before) but on vertical surfaces over 10mm rendering in CM (1:3) finished even and fair complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, etc. complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and directed.

M&L for 5mm thick, rendering in cement mortar (1:3) to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash to undecorated ceiling surfaces including preparation of new surfaces complete all as specified and directed .

M&L for two coats of white wash to old decorated plastered surfaces of ceilling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls complete all as specified and directed.

M&L for preparing old plastered surfaces of walls by vacuum based sanding machine after complete removal of existing treatment and applying two coats of acrylic distemper with 1st quality(ready mix) having VOC content less than 50gm/litre of approved manufacture of required shade and colour complete as per manufacturer instructions over a coat of alkali resistant primer by auto roller machine etc complete all as specified and directed.

M&L for applying one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of white wash on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for applying one coat of cement base paint on old decorated plastered surface of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops , dirts and splashes etc. complete all as specified and directed.

M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops , dirts and splashes etc.complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.

S&F in repair bib taps 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed.

S&F in repairs, bib taps, cast copper alloy, with crutch or butterfly handles, screwed down, screwed for iron pipe or brass ferrule for 15mm bore complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs 25mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs PVC syphone with handle complete for low level flushing cistern complete all as specified and directed.

S&F in repair 15 mm dia fancy type chromium plated concealed type stop valves, cast copper aloy with crutch or butterfly handles screwed down high pressure, screwed both ends for iron and fixed. complete all as specified and directed.

Dismantling water tank of capacity exc. 250 & n exc 500 complete all as specified and directed.

Dismantling water tank of capacity exceeding 500 and n exc 1000 complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 500 Ltr capacity triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 1000 Ltr capacity triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.

S&F 25mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs Brass CP mixer of 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP brass bottle trap 32 mm dia including jointing to waste fitting and waste pipe complete all as specified and directed.

S&F in repairs CP cast copper alloy bib taps long body with wall flange fancy type of 15 mm bore quarter turn complete all as specified and directed.

M&L for in repairs for CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for in repairs for CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair CP Grating doom 125 mm dia complete all as specified and directed.

S&F in repairs angle stop cock with wall flange fancy type of 15 mm bore quarter turn complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair of brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repair 32 mm dia waste PVC pipe flexible type for WHB 60 cm long with union complete all as specified and directed.

S&F in repairs of 40mm dia cup board knobs with nuts, screws and washers of mild steel bright finish complete all as specified and directed.

S&F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs 32mm bore waste fitting brass chromium plated for glazed ware sinks , basins etc with long screwed shanks and fly nuts , flange end bedded in red lead cement and other end fixed including 32mm low density polyethylene (LDPE) pipes of 80cm long of pressure rating 6 Kgf/Sqm complete all as specified and directed.

S&F in repairs 100mm bore waste fitting brass chromium plated for stainless steel sink etc with long screwed shanks and fly nuts , flange end bedded in red lead cement and other end fixed including 100mm low density polyethylene (LDPE) pipes of 80cm long of pressure rating 6 Kgf/Sqm complete all as specified and directed.

S&F in repairs 75mm bore waste fitting brass chromium plated for stainless steel sink etc with long screwed shanks and fly nuts , flange end bedded in red lead cement and other end fixed including 75mm low density polyethylene (LDPE) pipes of 80cm long of pressure rating 6 Kgf/Sqm complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as sockets,elbow,nipple up to size 200 mm ,tee,union of 15 mm bore etc. complete all as specified and directed.

S&F in repairs small fittings galvanised iron medium drade such as sockets,elbow,nipple up to size 200 mm ,tee,union of 20 mm bore etc. complete all as specified and directed.

S&F in repairs flush pipe of polythelene of low or high density of PVC ,32 mm dia,for low level flushing cistern complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, flat back size 630x450mm including brackets , waste fitting brass Chromium plated of 32mm dia, 32mm bore waste pipe HDPE pressure rating 6 Kg/Sqcm and 15mm bore 450mm long PVC connection with PTMT nuts, cutting for and pinning in end of brackets or erecting stand etc.complete all as specified and directed.

S&F in repair plastic water closet seat black/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair of sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B0 complete all as specified and directed.

S&F in repairs viteous china urinal,bowl type of size 465x355x265mm(minimum) white with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe) type (back or corner wall type) complete including providing and fixing plugs badding uinal against wall in cement concrete (1:2) ,securing urinal to plugs with and including 60 mm long bass scews ,pointing aound urinal back in cement ,fixing automatic flushing cistern in brackets,flush pipe,grating and union for discharge pipe(exclusive of fixing supply pipe to flushing cistern ,trap and waste pipe) complete all as specified and directed.

S&F in repairs of Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (Pedstal pattern), white excluding fixing bolts, flushing cistern and flush pipe, including plastic water coset seat, black closed pattern with flat bottom, and cover and mild steel chromimum plated hinging device complete all as specified and directed.

S&F in repair PVC valveless syphonic action type 10 ltr capacity flushing cistern low level with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polyethylene of low or high density complete all as specified and directed.

S&F in repair stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs etc complete all as specified and directed.

S&F in repair CP fancy type center hole basin mixer 15mm bore cast copper alloy with 450mm copper hose/braided hose without popup waste system quarter turn and fixed complete all as specified and directed.

S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.

S&F in repair CP wall mixer with flange & 115mm long bend pipe for over head shower non telephonic type with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water and complete all as specified and directed.

S&F in repairs coloured toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws fixed complete all as specified and directed..

S&F in repair CP Health faucet with stand fixed on wall in CP hose pipe 1 mtr length and stainless steel screw as approve complete all as specified and

S&F in repairs of bathroom PVC corner of best quality complete all as specified and directed.

S&F in repairs of fancy type caps/side bulbs PVC powder coated suitable for curtain rod complete all as specified and directed.

S&F in repairs steel window handles with complete fitting, peg stays & hinges etc as per sample complete all as specified and directed.

S&F in repairs elegant mirror PVC cabinet with towel rail of size 475x600x150 mm complete all as specified and directed.

S&F in repairs vitreous china water closet indian type 580mm long pan white with ''P'' or ''S'' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipes and making good disturbed portion to match existing surface complete all as specified and directed.

M&L for in repairs 25mm wide aluminium door cill and fixed complete all as specified and directed.

S&F in repairs aluminium (Die cast) alloy door closer hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs floor door stopper of aluminium (Die cast) alloy body and tounge, andonised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

M&L in repairs CP wall mixer telephonic shower arrangement with connecting legs wall flanges and telephonic shower crutch and telephonic hand shower single flow with self cleaning and flexible tube with hook 15mm bore for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

M&L for welding of existing damaged/broken hinges and any other member of steel windows, angle iron chowkets, steel glass, steel ventilator to achieve smmoth functionong complete all as specified and directed.

S&F in repair 25mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

KRISHNA CONSTRUCTION COMPANY

AMAN ASSOCIATES