Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance 7 91 KOTTARAPATTI PATHALAPETTAI POST TIRUCHIRAPPALLI TAMIL NADU 620013 | TIRUCHIRAPPALLI | TAMIL NADU | 620013 | Admitted-Finance |
| 5 | Rejected-Technical | Rejected-Technical Disqualified |
Tender Value
₹18.9 L
EMD Value
₹37,766
Closing Date
27 Feb 2020, 3:00 pmClosed
The Director, NITT
The Director, National Institute of Technology, Tiruchirappalli-620 015. KIND ATTENTION TO The Assistant Engineer/Electrical, EMC/EMD
Providing Lighting Facilities To Ring Main Units And Conversion Of Energy Efficient LED Fittings to 21st,22nd,23rd Street and Director Bungalow Garden Lightings.
2020_NITT_542690_1
NITT/EMD/EE/AE(E)/Tender Notice/Enq.No.20/19-20
Open Tender
Electrical Works
Works
120 days
National Institute of Technology Tiruchirappalli
Please Refer Tender Document.
10 documents required · 10 mandatory
₹0
₹37,766
Yes
18 Mar 2020
7 Feb 2020
28 Feb 2020
7 Feb 2020
27 Feb 2020
7 Feb 2020
7 Feb 2020 - 27 Feb 2020
Amount
EARTHING
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
MV CABLE LAYING
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
MV CABLE JOINTING & END TERMINATION
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
4 X 16 sq. mm (28mm)
POLE ERECTION
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Erection of bollard lighting pole with foundation arrangements works of steel Fabrication and Erection with size of 550x550x1000mm including with 150mm length of “J” bolt 4Nos and 2Nos M8 Nuts, plain washers with 155mm dia x 8 mm thick base plate with 4x10mm holes to suit M8 bolts at 115 PCD (Pitch Circle Dia) with 50mm hole for cable entry and M-20 concrete 200mm projection from the ground level including required excavation etc. as required.
OCTAGON POLE
3-6 mtr Octagonal street light pole Foundation, steel Fabrication and Erection with size of 550x550x1000mm including grilling with 8Nos of 12mm steel rod with height of 1000mm and cross grilling 10Nos of 8mm steel rod (ISI marked) with M-20 concrete 200mm projection from the ground level including required excavation, labour and fixing of street light fittings internal wiring with crane rent etc. as required.
MV OVER HEAD LINE WORK
Dismantling of pole 2 – 6mtr/ street light standard/ strut embedded in cement concrete foundation etc. as required.
MISC. CIVIL ITEMS
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
OD-63 mm & ID-51 mm nominal
SUPPLY OF POLES
Manufacturing, Supply and Installation of Octagonal /GI type wall street light bracket made of approved type and design with 500 mm overhanging from street light pole painting & not less than 9 Kg with one coat of Anti-corrosive Primer and two or more coats of automobile grade metallic paint of approved brand and shade, etc as reqd.
Supply of single l brackets 0.5 Meter long for pole having top 70mm A/F etc as required.
Supply of following size meters hot Tip galvanized, octagonal pole with bottom and top base plate flood light fixing pole 3mm thick etc. as required.
6 mtrs pole,base plate 200X200X12, top dia and bottom dia-70 & 130 (A/F),bolt size: 4X20 dia,Pitch circle dia-200mm,Bolt length-600mm,Projected bolt length-100mm,Bakelite sheet with one 6A single pole MCB and 16Sq.mm stud type connector ( for SA bracket) etc as required.
5 mtrs pole,base plate 200X200X16, top dia and bottom dia-70 & 130 (A/F),bolt size: 4X20 dia,Pitch circle dia-200mm,Bolt length-450mm,Projected bolt length-100mm,Bakelite sheet with one 6A single pole MCB and 16Sq.mm stud type connector ( for SA bracket) etc as required.
SUPPLY OF GARDEN LIGHT POLE
Supply and installation of bollard light pole and fitting with E27 base 13W LED bulb, Connector block and internal wiring etc. as required. (K-Lite: Causway ID 5455, Philips, Crompton, Bajaj)
SUPPLY OF ELECTRICAL ITEMS
Repairing and painting works.
Removing of street light fittings form street light poles and handover to EMC yard.
Digital type Timer (Make:L&T/Siemens/Schnieder/ABB)
Supply of batteries.
12V, 100AH battery ( Automative Bet Type)
Supplying of Cables.
Supplying of following size ISI marked PVC/XLPE insulated and PVC sheathed aluminium grade with armoured as required.(Make:Finolex,Gloster,Polycab and Havells with 18 months warranty from the date of supply)
4x16 sq mm
Supply of Light Fixtures with Lamps
Supply and fixing of outdoor of LED Floodlighting for instant start, Extruded aluminium heat sink, designed to act as efficient heat dissipater – important for LED luminaires, Pressure die-cast aluminium cover on both sides for holding of extruded aluminium heat sink, Luminaire provided with heat resistant toughened glass, Control gear compartment is an integral part of luminaire, LEDs are provided with secondary lens optics to get optimum optical performance, The driver used is specially designed to have surge voltage, open/short circuit protections and Luminaire is provided with a mounting bracket fixed on pressure die-cast aluminium covers for aiming adjustment etc. as required. (Make: Bajaj, Philips, Stand LED)
100 W LED Flood Light fitting with necessary arrangements Protection:IP65 -IP68 (inclusive of driver) (Make: Philips, Crompton, Bajaj)
Supply and fixing of outdoor decorative light fittings LED/MH/CFL post top made in cast/die cast aluminium spigot housing with decorative clear acrylic/pc diffuser and IP65 protection.
Post top luminaries with B27 base 30W Led Bulb K-Lite DOUBLE STANDARD ID: 5402
Supplying and fixing street light luminaire with die cast aluminum housing and toughened glass cover with min IP65 protection , with the LED Type fixtures of following Wattage complete with all accessories and drivers, LN6 heat sink minimum 5kVA surge protection low power LEDs with driving current less than 350mA etc. on existing brackets on street light poles including connection & loop earthing with 3 core 1.5 sqmm flexible PVC insulated PVC round sheathed copper conductor cable from street light box to fitting, testing and commissioning etc. as required. (with 5 years manufacturer's warranty) (Make: Havells,Bajaj,Crompton Greaves, & philips etc)
LED 45W white colour lamp.
SUPPLY OF ELECTRICAL AND ELECTRONICS ITEMS.
Supplying and fixing of power contactor in the existing MCB DB complete with connections,testing and commissioning etc. as required.(Make: legrand /ABB/ siemens)
Four pole power contactor 40A , 2NO+2NC
MANOJ ENTERPRISES
LAKSHMI ELECTRICAL WORKS
POWER ELECTRICAL WORKS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .