Construction Of Yatri Vishram Grah Rikhnikhal

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual mea in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including gettin out the excavated soil and disposal of surplus excavated soil as directed, within a lea of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level 1:5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size). by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item

Providing and laying in position specified grade of reinforced cement concrete exclu upto plinth level 1:1.5:3(1 cement:1.5 Coarse sand:3 20 mm stone aggregate)i/e all complete.

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with

Brick work with F.p.S.bricks of class designation75 in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item

Brick work with F.P.S. bricks of class designation 75 in Superstructure level upto floor v level in all shapes and size in 1:6 cement sand mortar.

P.C.C. 1:2:4 in hold fast etc.,in cement,sand and 20mm stone ballast including s/o all labour,material,T&P etc.,complet.

40 mm thick marble chips flooring,rubbed and polished to granolit under layer 28 mm thick cement concret 1:2:4 (1 cement:2 coar graded stone aggregate 12.5 mm nominal size)and top layer 12 mm white,black.chocolate,grey.yellow or green marble chips of sizes 10 mm nominal size laid in cement marble powder mix 3:1 (3 cement powder)by weight in proportion of 2:3(2 cement marble powder chips)by volume including cement slurry etc. complete

Reinforcement for R.C.C.work including straightening,cutting,bending in position and binding complet Reinforcement for R.C.C.work using Hard DrawnSteel Wire Fabrick

12 mm cement plaster of mix 1:6 (1 cement:6 Fine sand) on smooth side i/e all comp.

15 mm cement plaster of mix 1:6 (1 cement:6 Fine sand) on the rough side i/e all comp.

Providing and fixing M.S. Grills of required pattern in frames fixed to steel window by welding

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item

Renewing glass panes and refixing existing wooden fillets float glass of thickness 4mm i/e all comp.

Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestorywith 12 mm m.s.u beeding i/e all comp.

PCC 1:2:4 in drain arround the building incld s/o all materials ,labour T&P etc reqd. for proper completion of work.

Painting with synthetic enamle Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

providing and fixing 1st quality ceramic glazed wall tiles of approved make of colours, shades except brugendy, bottle green, black of size as approved by engineer in charge

White washing with lime to give even shade: New work (three or more coats)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade .New work (Two or more coats over and including priming coat with cement primer

Snowcem in three coats including one coat of Primer i/e all complete.

Centering and shuttering including strutting, ropping etc and removal of form for foundations,footting,basese of column as per specification.

Centering and shuttering including strutting, ropping etc and removal of form for suspended floors, roofs, landings balconies and acsess plateform

Centering and shuttering including strutting, ropping etc and removal of form for suspended floors, roofs, landings balconies and acsess plateform

Centering and shuttering including strutting, ropping etc and removal of form for columns,piers,pillars,Abutments posts and struts

Providing and fixing ISI marked Alluminium sliding door bolts 3000x16 mm

Providing and fixing ISI marked Alluminium sliding door bolts 250x16 mm

Providing and fixing ISI marked Alluminium tower bolt, 300x10 mm

Providing and fixing ISI marked Alluminium tower bolt, 250x10 mm

Providing and fixing ISI marked Alluminium handles conforming to IS 125 mm

Providing and fixing ISI marked Alluminium handles conforming to IS 75 mm

Treatment of soil under existing floor using chemical emulsion @ one litre per hole300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1:2 (I cment:2 coarse sand) to match the existing floor.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS 13592.Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion,( 1) single socketed pipes as per direction of Engineer - incharge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confirming to IS 13592.Type A including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion,( 1) single socketed pipes as per direction of Engineer - incharge.

Providing and fixing ball valve (Brass) of approved quality complete.High or low pressure with plastic floats as per direction of Engineer - in-charge,work to be executted as per specifications a rate of above given 20 mm nominal bore.

Providing and fixingwhite viterous china pedestrial type water closet squatting pan (Euoropean type)with 100mm sand cast iron P or S trap 10 litre low level white P.V.C. Flushing cistern

Providing and fixing water closet squatting pan (Indian type)with 100mm sand cast iron P or S trap 10 litre low level white P.V.C. Flushing cistern

Providing and fixing one urinal basin with 5 litre white P.V.C.automatic flushing cistern i/e all complete.

White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. as per direction of Engineer-in-charge, work to be execuated as per specification a rate of above given

Providing and fixing to the inlet mouth of rain water pipe cagrating 15cm diametre i/e all complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including i/e all complete.

providing and fixing G.I.pipes including painting with anti corrosive bitumastic paint, cutting chases and making good the wall -Enternal workExposed on 15 mm dia. nominal bore as per direction of Engineer-in-charge, work to be execuated as per specification a rate of above given

providing and fixing G.I.pipes including painting with anti corrosive bitumastic paint, cutting chases and making good the wall -Exnternal work -Exposed on 20 mm dia. nominal bore as per direction of Engineer-in-charge, work to be execuated as per specification a rate of above given

Providing and fixing brass bib cock of approved quality 15 mm nominal bore as per direction of Engineer-in-charge, work to be execuated as per specification a rate of above given

Providing,laying and jointing glazed stoneware pipes grade A with stiff mixture i/e all complete.

Providing and laying cement concret 1:5:19.around pipes i/e all complete.

Constructing Soak pit 1.20x1.20x1.20 m filled with brick bats including pipe 100 mm i/e all complete.

Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse Inside size 90x80 cm and .45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With F.P.S. bricks with class designation 75 as per direction of Engineer-in-charge, work to be execuated as per specification a rate of above given (With F.P.S. bricks)

Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per direction of Engineer-in-charge, work to be execuated as per specification a rate of above given

Sunil Manwal