REPAIR AND MAINTENANCE TO SOMNATH STADIUM MT SECTION EQUITATION SECTION AND OTHER CENTRAL AMENITIES IN CENTRAL AND SOUTH COMPLEX UNDER AGE BR I AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc upto 10.5m height complete as specified

M&L for Rendering 15 mm thick on brick or concrete surface in cement mortar (1:4) , surfaces finish even and smooth without using extra cement upto 10.5m height complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar (1:6) using coarse sand on stone masonary surface and other than fair face of brick work finished even and smooth without using extra cement complete all as specified and directed.

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work including demolition of existing old concrete etc complete all as specified and directed.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

S&F 2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.

S&F Rolled structural mild steel work rectangular tubing/angle as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed including dismantling existing wooden scantling/frame work.

S & F framed work as in doors or gates of square/rectangular tubing/mild steel angle iron, gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete of Fe-290 ( GdeE-165) including one shop coat of zinc chromate primer paint complete all as specified and directed.

S&F Welded steel wire fabric weight not exc 4 Kg/Sqm complete to wood or steel members including dismantling existing fabric of any description complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

S&F 6mm thick Cement corrugated or semi corrugated sheets in roof fixed with ' L' type or ' J ' type hooks or cranked bolts and nuts complete all as specified and directed including dismantling existing sheet.

S&F 2.00 mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J or L hook and washer in roof, wall etc. complete all as specified and directed including dismantling existing sheet.

S&F 0.80mm Plain, galvanised, mild steel sheeting, in ridges hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of class-VIII complete all as specified & directed including dismantling existing sheet.

S & F flat iron 40X6 mm as in wind tie including necessary holes all as specified

M&L for Ready Mix Cement concrete M-25 (design mix) , (using 20 mm graded crushed stone aggregates) in pavement/hard-standing , any thickness, finishing the concrete surface by brooming while concrete is green, complete all as specified & directed. (Note: - Ready mix concrete shall be brought from approved cement concrete plant)

M&L, Dividing strips of 6mm thick of plain cement fibre board inserted vertically in position to forming construction joint 100 mm deep and complete all as directed.

M&L for PCC 1: 3 : 6 type C-1 (using 20 mm graded crushed stone aggregates) in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for Glazed ceramic coloured tiles of size 300 mm x 450 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in tile grout to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the IMA premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0. 38 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the IMA premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the IMA premises complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in tile grout cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the IMA premises all as directed.

M&L for Vitrified ceramic tiles any shade 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the IMA premises complete all as directed.

M& L for Vitrified ceramic tiles any shade 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in vertical surface such as skirting dado and riser to step floor etc set and jointed in tile grout to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the IMA premises complete all as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed cement mortar 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the IMA premises complete all as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick laid over 10mm thick rendering in cement mortar 1:4 as base on vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the IMA premises complete all as directed.

Cutting and grinding of existing Granite/kota stone floor surface(2cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed by Engr-in-Charge.

M&L for Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip Infrastructure, Jain Tiles Haldwani, NTC Panchkula.

All as per item No. 35 above but except paver block.

M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in cement mortar 1:4 incl demolition of existing old RCC slabs of any description complete all as directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

S&F Mild steel TMT bars 10mm dia & over bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

S&F 40 mm thick first class hard wood (teak wood) in flooring skirting planed on side with butt joints and fixed with nails with and including 2 coats of cresoting on back side of wooden surface and two or more coat of french polishing on exposed surface complete all as specified & directed including dismantling existing timber scantling complete all as specified and directed.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed. Make:- Jaquar, Cera (Victor Series), Kohler

S&F 15mm dia pillar cock Super Delux with Aerator fixed in repair complete all as directed. Make:- Jaquar, Cera (Victor Series), Kohler

S&F 15mm bore long body bib tap with wall flange fixed in repair complete all as directed. Make:- Jaquar, Cera (Victor Series), Kohler

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed.Make:- Jaquar, Cera (Victor Series), Kohler

S&F Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. Make:- Jaquar, Cera, Kohler

S&F 15mm bore stainless steel jet spray with 1.00meter PVC tube fixed in repair complete all as directed. Make:- Jaquar, Cera, Kohler

S&F in repair water closet vitreous china Squatting pan, Orissa pattern, size 580x440mm with integral foot rests complete all as directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed. Make:- Cera, Jaquar, Parryware.

S&F in repair plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm including 32mm CP waste coupling, waste pipe, fixing brackets complete all as specified & directed.

S&F Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed.

S&F Chromium Plated brass soap dish fixed in repair complete all as directed.

S&F 100mm dia chromium plated grating with/without hole fixed in repair complete all as directed.

S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. Make:- Cera, Parryware, Polytuff.

S&F Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. Make:- Cera, Parryware, Polytuff.

S&F 15mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make:- Kirlosker, Leader, Zoloto.

S&F 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make:- Kirlosker, Leader, Zoloto.

S&F Stack clamps made out of 20mm X 2 mm flat iron and 16mm dia round iron stays, for fixing 100 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F PVC (SWR) bends in any radius 110mm bore in repairs complete all as specified and directed

S&F PVC (SWR) bends in any radius 75mm bore in repairs complete all as specifed and directed

S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F Brass spindle for existing bib cock, wall mixture, WHB mixture fixed in repair complete all as directed.

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr vacumation, dewatering, desludging, rubbing internal surfaces with soft sponge & medium hard sponge to remove coglation with vinegar solution or light acid, drawing the tank by wet vaccume cleaner, disinfecting the internal surfaces with KMNo4 solution & drying it again with vaccume cleaner and marking the outer surface of overhead tank with synthetic enamel paint using stancils (Date of cleaning month & Year).

Description all as per serial item No 69 here-in-before but capacity of water tanks exc 500 ltr and not exc 1000 ltr

S&F 500 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S&F 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed.

S&F PVC lid for PVC water tank with hinging device and locking arrangement of capacity 500 ltr to 1000 ltr with necessary nuts, bolts and washer etc fixed in repair complete all as directed.

S&F in repair PVC connections 15mm size with PTMT length 600mm.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

Taking down shutter of any description n.exc 1 sqm each complete all as specified & directed.

S&F Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling complete all as directed.

S&F Pressed steel frame of 165 x 60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling complete all as directed.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Steel window factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

S& F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F factory made 30 mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

S&F factory made 35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S&F factory made 30mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc (with sash bars) devided into squars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made single extruded WPC (Wood Polymer Composite) solid Molded flush door shutter of 24mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

S&F 2nd class hard wood, plain fillet, square, rectangular or triangular in section, sectional area exc 6 sqcm but n.exc 13 sqcm complete fixed in repair all as directed.

S& F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed

S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed.

S&F Butt hinges, 75mm long, medium weight, cold rolled, mild steel complete all as directed

S&F 150mm long aluminium anodized handle cast type complete all as directed.

S&F 100mm long aluminium anodized handle cast type complete all as directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed

S&F PVC coated MS curtain rods 20 mm dia with brackets, finnale golden colour fancy type all as directed and approved fixed in repair complete all as directed.

Complete removing of existing treatment from wall / ceilling by using mechanical saner/ Screpper complete all as specified and directed. (work to be carried upto a height of 7.50m high.

Prepration of scrapped / new surface of wall / ceilling and applying 1.50 mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger, Nerolca, Shalimar of any tint over a priming coat on wall, chajjas, facia etc with mechanical spray mechine complete all as directed. Note : The work will be carried out upto double storey building.The rate of scaffolding and guarantee for 3 yeas is included for this item also .

Prepration of scrapped / new surface of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer using mechanical means complete all as specified and directed.

Preparation of new plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying three coat of white wash on walls complete all as specified and directed.

Preparation of new surfaces of wall / ceiling and applying two coats of cement based paint including scaffolding complete all as specified and directed. (work to be carried upto a height of 7.5m) .

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger, Nerolac, Shalimar on walls complete all as directed.

Preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over one coat of red oxide primer complete all as specified and directed

Preparation of new wood and wood based surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint with approved shade over one coat of pink primer complete all as specified and directed

M & L for washing down and stopping of plastered or brick masonry surfaces including corrugated AC sheet roofing and applying one coat of cement base paint (snowcem) complete all as specified.

M&L for preparation of old coloured/ painted concrete surfaces/ tiles, paver block, floor tiles etc of any description, cleaning with wire brushes, removing all dust & dirt from surfaces, washing with water and applying two coats of tile/floor paint of approved make and colour, complete all as specified and directed.

M/S S P BUILDERS

ACE BUILDERS AND CONTRACTORS

Alankar Traders

M/s Vinod Singh Negi

KRISHANA ELECTRIC WORKS

Sharda Enterprises

Aggrawal Builders and Furnishers