Deposit Work Department of Health Supply and installation of Diesel Generator set at District Vaccine store FW Store at Kalpettad

Amount

od26108/2021_2022 : Supply, conveyance, Installation, testing & commissioning of 3ph 50Hz,15 KVA Diesel Generator set with integral acoustic enclosure as per CPCB norms with srandared acessories as per technical details given below. 1. Engine : a) Make of Engine - KOEL/ Leyland/ Mahindra/ Cummins b) Type of Engine - Diesel Engine c) No. of Cylinders - As per manufactures standards. d) Method of Cooling - Water cooled with radiator. e) Design - Suitable for generating set operation 2.Standard accessories with Diesel Engine a) Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan guard. e) Fuel Pump f) Fuel filter g) Lubricating oil filter h) Exhaust silencer i) Exhaust Muffler j) Battery Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or button b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter e) Battery charging Ammeter 4. Safety Controls for Engine a) Trip for low lubricating oil pressure b) Trip for high water temperature. 6. Brushless Alternator a) Make - KOEL/KEL/Crompton/Greaves/Stamford b) Type - Self exited and self regulated. c) Capacity - 15 KVA/12 K W @ 0.8PF d) System of Voltage - 3 phase, 415 V, e) Frequency - 50 Hz f) Insulation - Class F/H The Alternator should confirm to IS 4722. Operation and service manual, spares and tools shall be provided. 7. Fuel Tank Suitable size built in type integrated with the acoustic enclosure Fuel connection shall be done as per standards 8. Battery Suitable size built in type integrated battery with leads and terminals of appropriate AH capacity as per Manufactures requirement. Automatic Battery charger should be installed inside the set, Solid state phase indication lamp for supply ON/OFF with HRC protection. standard conrol panel as per kerala Electrical Inspectorate requirements, with 40A 4 pole MCCB and accessaries such as Multi function metre and seperate Energy metre etc.Complete.

90.14.7 : Supply and providing copper earth bus in the panel board

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp

90.12.9.2 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.12.39.34 : Supply & laying of one number PVC insulated and PVC sheathed armoured copper power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.4 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od26545/2021_2022 : Supply and providing 25x6mm brass nut and bolt etc. as required.

od26547/2021_2022 : Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

od26549/2021_2022 : Supply and providing 12x3mm brass nut and bolt etc. as required.

od26551/2021_2022 : Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

od26555/2021_2022 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper Control cable, of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 12 core 2.5 sq mm with factory made clamp

od26665/2021_2022 : Fees for Electrical inspectorate/KSEB including all laison work etc.(actuals will be paid on production of relevant documents.)

od26667/2021_2022 : Preparation of electrical drawings in A3 sheet as per requirements in electrical inspectorate approvals-First copy

od26669/2021_2022 : Preparation of electrical drawings in A3 sheet as per requirements in electrical inspectorate approvals-Additional sheet copy

od27654/2021_2022 : Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

od27656/2021_2022 : Painting letters or figures of the 2.5cm or nearest sizes with enamel paint as identification mark to SB, DB, panel board etc as required

od27658/2021_2022 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

od27660/2021_2022 : supply and providing 9 Litercapacity GI Fire bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/wall bracket filled with fine sand painting the bracket/ floor stand including making good the damages, colour washing etc. as required.

ABDUL NAZER K

Bidder Name

ABDUL NAZER K

SOMAN K