Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹6.3 L
Closing Date
23 Jun 2026, 3:00 pm
Rajkot Division :-Construction of office and Store for SSE-P.Way/E/ RJT and Office building with Pegion Net at DMC-RJT.
DRM-RJT-2026-27-E-07
DRM-RJT-2026-27-E-07
Open
12 Months
Rajkot, Gujarat
₹0
₹6.3 L
1 Jun 2026
1 Jun 2026
9 Jun 2026
Item Breakup - A-CPWD DSR ITEMS
77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 112 18.7.1 15 mm nominal dia Pipes Metre 325 286.8 93210 113 18.7.3 25 mm nominal dia Pipes Metre 325 401.55 130503.75 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 114 18.8.3 25 mm nominal dia Pipes Metre 225 627.25 141131.25 115 18.8.4 32 mm nominal dia Pipes Metre 225 739.3 166342.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 116 18.9.3 25 mm nominal dia Pipes Metre 165 355.4 58641 117 18.9.4 32 mm nominal dia Pipes Metre 165 438.6 72369 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 118 18.17.1 25 mm nominal bore Each 3 622.4 1867.2 119 18.17.4 50 mm nominal bore Each 3 1026.65 3079.95 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 120 18.18.3 25 mm nominal bore Each 3 464.05 1392.15 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 121 18.22.1 100 mm diameter Each 3 193.95 581.85 RAJKOT DIVISION-ENGG/WESTERN RLY C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and filling sand of grading zone V or 18.41 coarser grade, allround the G.I. pipes in external work : 122 18.41.3 25 mm diameter pipe Metre 100 160.7 16070 123 18.41.6 50 mm diameter pipe Metre 100 173.25 17325 124 18.41.8 80 mm diameter pipe Metre 100 281.8 28180 18.48 Providing and placing on terrace (at all floor Per 10000 11 110000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 125 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 126 18.49.1 15 mm nominal bore Each 3 506.8 1520.4 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 127 18.52.1 15 mm nominal bore Each 6 670.45 4022.7 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and laying Double Flanged (Screwed/ 18.73 Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS :8329 : 128 18.73.1 100 mm dia Ductile Iron Double Flanged Metre 100 1821.55 182155 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed 19.6 with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 129 19.6.10 900 mm dia. R.C.C. pipe Metre 100 4750.85 475085 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm 19.7 nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of 19.7.2 cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 130 19.7.2.2 With Sewer bricks conforming to IS : 4885 Each 5 26244.7 131223.5 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft 19.32 with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 4 26861.9 107447.6 131 bricks of class designation 7.5 21.0 ALUMINIUM WORK RAJKOT DIVISION-ENGG/WESTERN RLY 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. 21.1 Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 700 495.05 346535 132 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 60 1139.3 68358 133 lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 24 1505.25 36126 134 (weight not less than 12.50 kg/sqm) 21.3.3 With float glass panes of 8 mm thickness Sqm 30 1685.4 50562 135 (weight not less than 20 kg/sqm) 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 50 8042.3 402115 136 sand : 4 graded stone aggregate 20 mm nominal size) 137 22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cum 50 16112.1 805605 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.68 grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 138 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 65 7387.25 480171.25 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.69 grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 139 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 210 9844.65 2067376.5 Total 43374417.22 RAJKOT DIVISION-ENGG/WESTERN RLY
Item Breakup - B-IRUSSOR ITEMS
JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 126913.50
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ProformaofAnnexure-VIB.pdf
ATTACHMENT
GCCACS1to11.pdf
ATTACHMENT
Annexure-VI.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
Annexure-VVARevisedFormatForCertificate.pdf
ATTACHMENT
ACS01to10ofIRGCCApril2022.pdf
ATTACHMENT
PBGFORMAT.pdf
ATTACHMENT
ProformaofMOUforJV_1.pdf
ATTACHMENT
BankDetails.pdf
ATTACHMENT
NoRelativeCertificate.pdf
ATTACHMENT
CertificateforRailwayEmployeeRe-engagement.pdf
ATTACHMENT
LetterofCreditasModeofPayment.pdf
ATTACHMENT
ProcedureforpaymentofcontractorbillImplementationofGST.pdf Procedure for Payment
ATTACHMENT
ProcedureForEnsuringSafetyAtWorkSite.pdf
ATTACHMENT
SafetyRules.pdf
ATTACHMENT
IRSGCC APRIL 2022
ATTACHMENT
ProcedureforpaymentofcontractorbillImplementationofGST.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
Download all tender documents and submit your bid