RMU Associated UG cable 26-27 - Ring-2 (33 kV Puthiyatheru SS - 33kV Kannur Town SS) - Part-3 under Pallikkunnu

Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.

Doing one cable end termination on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally after making fencing,caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers.

Mounting and connecting HT XLPE UG cable ends of all sizes upto and including 3x300 sq mm with special type cable clamps, bolts, nuts, terminal protectors etc.including cost of extra materials if needed and giving necessary jumper connections.

Horizontal Directional Drilling (HDD), supplying and pulling 110/125 /160 mm HDPE pipe duct for drawing 3 × 300 sq.mm Aluminium XLPE underground (UG) cable through the HDPE Pipe , including drawing, pulling, and laying of the UG cable; including route survey for identification of underground utility installations and other obstructions using suitable modern sensing equipment, pit excavation, pilot drilling, pre-reaming, reaming, and duct pulling, using bentonite or approved drilling fluid wherever necessary for bore stability and lubrication; cable pulling, backfilling and closing of pits with normal soil and proper consolidation or by any method as directed by the Department Authorities, without causing damage to existing utility services; supplying and providing route markers at 100m intervel and providing danger/caution boards as per the directions of Department Officers, etc

Transporting UG Cable

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.

Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.

Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).