Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹6.5 L+₹15,312.94 (2.40%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹7.1 L
EMD Value
₹17,850
Closing Date
5 Nov 2019, 6:00 pmClosed
SHILPA KP
ASSISTANT ENGINEER LSGD SECTION AZHIKODE GP
INTERLOCKING AND SHEET ROOFING WORK
2019_LSGD_313143_13
01.1/2019/aelsgdetender
Open Tender
Civil Works - Others
Item Rate
150 days
AZHIKODE
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,428
Yes
online
₹17,850
Yes
26 Feb 2020
26 Oct 2019
11 Nov 2019
26 Oct 2019
5 Nov 2019
26 Oct 2019
Amount
RENNOVATION
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
od289054/2019_2020 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm brocken stone filling tne jpoints with fine sand etc.all complete as per the direction of engineers at site
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
od333988/2019_2020 : Providing trafford Alu Zinc sheet roofing including vertical/curved surface fixedwith<br>polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen andG.I. limpet washers or with G.I.<br>limpet washers filled with white lead and includinga coat of approved steel primer and two coats of approved<br>paint on overlapping ofsheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding<br>the cost of purlins, rafters and trusses and including cutting to size and shapewherever required. 0.40mm<br>thick Alu Zinc sheet corrugated<br>
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
od334000/2019_2020 : Providing and fixing 150 mm split pipe over flat iron brackets 20 x 5 mm size
50.18.9.15.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall
4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
50.18.7.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall
50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
18.15.2 : Providing and fixing brass bib cock of approved quality :20 mm nominal bore
od333879/2019_2020 : Supplying and fixing name boards of size 75cmx45cm. made with GI plan sheet 1.25mm with GI plain sheet s 1.25mm thick (class III) fitted with 35x35x4mm MS angle 2 nos. horizontally and 3nos. vertically to make a frame for strengthening the GI sheet, fitted 2nos. 32mm GI pipe vertically 90cm above from ground level and fixing in cement concrete 1:2:4, 30cmx30cmx30cm including cost and conveyance of all materials all labour charges, fabricating etc. complete.
13.71 : Lettering with black Japan pint of approved brand and manufacture
RENJITH K P
Bidder Name
K PRABHAKARAN
RENJITH K P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_431138.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .