CERTAIN REPAIR TO DRAINS CLEANING OF SEWAGE LINES SEPTIC TANKS MANHOLES SECURITY WALL FENCING AND MISC REPAIR WORKS and PERIODICAL SERVICES FOR CERTAIN BUILDINGS AT ICGS KAKINADA UNDER AGE I CG VIZAG

Amount

M & L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered surfaces and applying a coat of oil bound distemper on surfaces of walls complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

M & L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered surfaces and applying a coat of oil bound distemper on surfaces of Ceilings complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

M&L Preparation of old painted surfaces of walls by washing down, rubbing and removal of stains and applying one coat of weather proof acryllic emulsion paints, exterior grade (100% acryllic) on surfaces of walls. Make : (i) Weather coat paint :Apex ultima from Asian paints or equivalent / All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M&Lfor applying one coat of synthetic enamel paint to old steel surface including preparation of surface of any description over 10 cm width or girth. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

M&L for applying one coat of synthetic enamel paint to old wooden surface including preparation of surface of any description over 10 cm width or girth. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering in CM 1:4, 5 mm over CM 1:6 10 mm, on external brick work or concrete surfaces , finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions complete all as specified and as directed. (Note :- Liquid WPC will be measured and paid separately)

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces of ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

M&L for preparation of new wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. Make : Super-Snocem / Durocem / Aquacem

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed. Make Distemper : Asian / Nerolac / Berger ( All are 1st quality)

M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

M&Lfor appliying three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

Cleaning of existing open or covered drain of any section and depth by removing mud, sludge or foreign materials from existing storm water drain/covered drain, static tanks etc, flushing with adequate quantity of water and removing the sludge to a distance not exc 250 m complete all as specified and as directed.

Demolition of reinforced cement concrete in slab, beams, staircase, landings, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for TMT bars 8 mm to 10 mm dia and over cut to length, bend to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 m dia complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M & L for PCC 1:3:6, Type C-1 [using 20 mm graded granite stone aggregate] in surface channels and drains including forming fair finished drain or channel using extra cement including forms, moulds, mitred / stepped ends complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and as directed.

M & L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No. 23 here in before but except bricks.

Plain Cement Concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Removing plants / herbs grown on walls/junctions with roots using herbicide chemical and of existing brick and concrete in drain complete all as specified and as directed.

Removing carefully the precast cover slabs of septic tanks, cleaning the septic tank by removing solid waste/sludge from the tank removing the sludge from the edge of septic tank after drying and removing the same outside MD land and land where directed including dewatering and applying one coat of linseed oil on the bottom and sides of the septic tanks (inner side) and setting the same covers in old position in CM 1:6 after inspection by Engr-in-Charge and as directed. Note: 100 Users capacity and below

Removing carefully the precast cover slabs of septic tanks, cleaning the septic tank by removing solid waste/sludge from the tank removing the sludge from the edge of septic tank after drying and removing the same outside MD land and land where directed including dewatering and applying one coat of linseed oil on the bottom and sides of the septic tanks (inner side) and setting the same covers in old position in CM 1:6 after inspection by Engr-in-Charge and as directed. Note: 100/150 Users capacity

Removing carefully the precast cover slabs of soakage pit, cleaning the soakage pit by removing solid waste/sludge from the tank removing the sludge from the edge of septic tank after drying and removing the same outside MD land and land where directed including dewatering and applying one coat of linseed oil on the bottom and sides of the soak pit (inner side) and setting the same covers in old position in CM 1:6 after inspection by Engr-in-Charge and as directed.

Removing carefully the cover slabs of manholes of any size and shape and removing the scum/sludge including any organic or inorganic matters and disposing the same to a distance exc 250m and n.exc 500m where directed and setting the manhole cover old in position in CM 1:6 after inspection by Engr-in-Charge and as directed.

Cleaning carefully with using fresh water for the blockage in CI or SWG pipe of 150 mm dia in between man holes and passing rubber ball through line to ensure all blockage perfectly clear complete all as directed.

Cleaning of blockage in the floor/nahani traps in kitchen or bath room or sinks by manually or with water jet after carefully removing the old grating and refixing the grating in the same position including finishing with white cement complete all as specified and as directed.

Removing carefully the cover slabs of gully traps of any size and shape and removing the scum/sludge including any organic or inorganic matter to a distance exc 250 m and n exc 500m and setting the cover slab in old position in CM 1:6 after inspection by Engineer-in-Charge and as directed.

Cleaning by rodding/ bamboo split and taking out waste soil sludge and other foreign materials from sewage line any dia removed in sealed container (from WC to onward upto septic tank/soak well) and flushing with water etc. complete all as specified and as directed.

Cleaning of blocked WC by using vacuum pump including opening and refixing/CI cover to bend and branch pieces and finally cleaned with adequate quantity of water.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories).

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make: Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

S&F in repairs 110mm bore PVC (SWR) bends of any radius with access door complete all as specified and as diretced.

S&F in repairs 75mm bore PVC (SWR) bends of any radius with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 75mm complete all as specified and as directed.

S&F in repairs PVC valve less, syphonic action type, flushing cistern of 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

S & F in repairs Vitreous Ware wash down water closet (Pedestal), white (ETWC) with cover and Mild steel chromium plated hinging device, 'P' or 'S' Trap complete all as specified and as directed. Make of WC :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests with integral foot rests (excluding flushing cistern and flush pipe) including removing of existing pan and setting the trap and pan in line concrete to min 150 mm thick all round and finished just before level of rim of pan to receive the floor finish and fixed in repairs and making good the existing surface etc. complete all as specified and as directed. Make : M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality).

S&F in repairs vitreous China wash hand basin, white, flat back, size 630 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repairs vitreous china urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

In repairs, Vitreous China Ware white Urinal partition of size 310 X 700 mm terminating about 40 Cm above floor line complete all as specified and as directed. Note:- The make shall be same of existing Urinal

M&L 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs 32 mm dia flexible PVC waste pipe for basin, sink & urinal etc as fixed complete all as specified and as directed.

S&F, Stainless steel 100/125mm with/without hole for waste pipe Grating complete all as specified and directed.

S&F in repairs of 100 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repairs rotational moulded polythene water storage tanks, multi layered 500 ltrs capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling Old unserviceable one complete all as specified and as directed. Make: Sintex / Polywell / Polycon

S&F in repairs rotational moulded polythene water storage tanks, multi layered 1000 ltrs capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling Old unserviceable one complete all as specified and as directed. Make: Sintex / Polywell / Polycon

Disconnecting existing tanks of any description of capacity exc 500 Ltrs but not exc 1000 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. Note: Cleaning, repairing, etc. measured separately.

Disconnecting existing tanks of any description of capacity exc 250 Ltrs but not exc 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. Note: Cleaning, repairing, etc. measured separately.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 Ltrs but not exc 1000 ltrs., cleaning with bleaching powder slurry and allowed to dry and tank washing and cleaning the tank with fresh water including refixing the top cover of tank properly after cleaning and writing letters such as details of the tanks like date of cleaning, capacity of tank with synthetic enamel paint with letter size 10 cm height in black colour, over a thick of size 60 x 30mm complete all as directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 Ltrs but not exc 500 ltrs., cleaning with bleaching powder slurry and allowed to dry and tank washing and cleaning the tank with fresh water including refixing the top cover of tank properly after cleaning and writing letters such as details of the tanks like date of cleaning, capacity of tank with synthetic enamel paint with letter size 10 cm height in black colour, over a thick of size 60 x 30mm complete all as directed by Engineer-in-Charge.

S&F PVC tank cover for water tank of any capacity with proper locking arrangement including taking down old one complete all as directed by Engineer-in-Charge.

S&F in repairs 25 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Prayag Polymer Pvt. Ltd. / Polytuff

S&F in repairs 20 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Prayag Polymer Pvt. Ltd. / Polytuff

S&F in repairs 15 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Prayag Polymer Pvt. Ltd. / Polytuff

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store all complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store all, complete all as specified and as directed.

Fixing only tubes of 15 mm bore, any grade, to walls and ceilings or laying in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

Fixing only tubes of 20 mm bore, any grade, to walls and ceilings or laying in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

S&F 15 mm bore tubes, medium grade, galvanized, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

S&F 20 mm bore tubes, medium grade, galvanized, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

S&F in repairs gun-metal, globe or gate valves of 25mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / Leader / Zoloto / Audco / Venus / Upadhaya

S&F in repairs gun-metal, globe or gate valves of 20mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / Leader / Zoloto / Audco / Venus / Upadhaya

S&F in repairs gun-metal, globe or gate valves of 15 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / Leader / Zoloto / Audco / Venus / Upadhaya

Renewing ceramic/glazed tiles in floor/wall in patches area not exc 5 Sqm including removing and cleaning Old unserviceable tiles, preparing beds and laying or setting, jointing and pointing new or Old unserviceable tiles complete.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Resecuring or casing & adjusting without taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed.

Resecuring or casing & adjusting without taking down shutter of any description exceeding 1 Sqm each complete all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with clue painted at joints complete all as specified and as directed.

S&F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [any number of panels] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

S&F 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed. ut mitered beads for securing class etc., complete all as specified and directed.

S& F 100 mm long [ ISI marked ] medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

Mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed.

M&L for plain cement concrete, type B1, 1:2:4 (Using 20mm graded granite stone aggregate)as in cast in situ bed blocks, copings and the like including weathering, solightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparing old painted surfaces by washing, rubbing down and stopping of distempered surfaces and applying a coat of cement base paint on surfaces of walls complete all as specified and as directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

M&L for excavation in trenches, not exc 1.5 m wide and 1.5 m in depth for foundation, etc or for shaft, wells, cesspits, manholes pier holes, etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and as directed.

Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

K Satyanarayana

ANJALI CONSTRUCTIONS

HARSHITHA INFRA

sri sai ram constructions

SRI JAYANTH ASSOCIATES

M/S REAL POWER SYSTEMS