C/O Additional Block for Newly Up Gradded 100 Badded Civil Hospital at Thural in Tehsil Palampur Distt. Kangra HP (SH - Providing EI therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C : Make of Switches :- L&T (Antice ) , Anchor ( Roma ) , Legrand (Myrus)

Make of Wire :- KEI, Anchor, Finolex, SCI

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C : Make of Switches :- L&T (Antice ) , Anchor ( Roma ) , Legrand (Myrus)

Make of Wire :- KEI, Anchor, Finolex, SCI

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

S.P. 5/ 6 Amps one way Modular switch.

S.P. 15/ 16 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

6 pin,15/16 Amps Modular socket outlet.

Make :- L&T (Antice ) , Anchor ( Roma ) , Legrand (Myrus )

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

Make :- L&T (Antice ) , Anchor ( Roma ) , Legrand (Myrus )

Providing, Installation, testing and commissioning of ceiling fan with two module modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Category-A

Makes:-Bajaj,Usha,Crompton, Panasonic or equivalent make

supplying and Fixing of Surface mounting Round (225x225x35 mm) LED solution suitable for surface application with the use for latest technology 20 Watt ( 2000 lumens) K-4000and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

LED surface mounting Round downlighter 20 watt

Makes:- Panasonic (PDLM10204BS)),Bajaj, C&S , Jaquar or any other approved make.

supplying and Fixing of recessed mounting Round (225x225x35 mm) LED solution suitable for surface application with the use for latest technology 20 Watt ( 2000 lumens) K-4000and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

LED recess mounting Round downlighter 20 watt

Makes:- Panasonic (PPAM12103BS),Bajaj,C&S , Jaquar or any other approved make.

supplying and Fixing of surface mounting 1x1 size LED solution suitable for surface application with the use for latest technology 20 Watt ( 2000 lumens) K-4000and it shold be compatible with spectfcations i.e. Power factor > 0.9 , Harmonic dlstortion < 10% and efftcacy > 100 tumens per watt, CRL>80. sultable for lnput voltage AC 220-240v ,50/60 HZ omplete with all accesseries,including connections,testing and commissioning etc.as required complete in all respects

LED surface mounting downlighter 20 watt (1x1)

Makes:- Panasonic (PDLM10204BS)),Bajaj, C&S , Jaquar or any other approved make.

Providing and fixing Surface/ Recess LED Down lighter 36 watt(3600 Lumens) of following rating Al housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED Down lighter 36 watt (2X2)

Makes:- Panasonic (Cat NoPBLM21364), Bajaj,C&S , Jaquar or any other approved make.

Providing and fixing surface mounted LED Fixture (4x1) long with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 36 watt (3600 Lumen) 4000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED tube fixture 36 Watt (4x1)

Makes:- Panasonic (Cat. No. PBLM15363)/ Jaquar / Bajaj

Providing and fixing indoor decorative aluminium extruded LED Tube fixture of following rating and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

LED tube fixture 18 Watt

Makes:- Bajaj (BLRB 18W CWc),,C&S , Jaquar or any other approved make.

Providing and fixing LED Bulk head of following rating Al housing and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required.

Bulk Head Fitting

Makes:- Panasonic (Cat. NoPBTM08204)-Havells, C&S, Anchor, or any other approved make.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Bed side bracket, Makes:- Bajaj (BCLCB 05 WH)Havells, C&S, Anchor, or any other approved make

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Mirror light 460 mm,Makes:- Bajaj (BCLCB 05 WH)Havells, C&S, Anchor, or any other approved make

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes- Havells, Anchor, Finolex, KEI

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes- Havells, Anchor, Finolex, KEI

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x2.5 Sq. mm.

2x6.0 Sq. mm.

2x10 Sq. mm.

Makes- Havells, Anchor, Finolex, KEI

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes- Havells, Anchor, Finolex, KEI

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes- Havells, Anchor, Finolex, KEI

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x2.5 Sq. mm.

Makes- Havells, Anchor, Finolex, KEI

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way

Double door-12 way

Double door-16 way

Make :-L&T , Legrand , ABB ,Hager

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 pole MCCB incomer, 2 module sub-incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-2+12 way (MCCB+6+36) module.

Makes:-Hager (Cat No:- VYP12DM,VYP06DH), L&T , Legrand , ABB

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A. (6amp)

Single pole. Cat-A. (25amp)

Single pole. Cat-A. (16amp)

Make :-L&T , Legrand , ABB ,Hager

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Make :-L&T , Legrand , ABB ,Hager

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Make :-L&T , Legrand , ABB ,Hager

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.

Make :-L&T , Legrand , ABB ,Hager

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp. -16 KA

Make :-L&T , Legrand , ABB ,Hager

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required.

Make :-L&T , Legrand , ABB ,Hager

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Supplying and fixing LED 9 Watt bulb on the existing accessories as required.

Makes:- C&S ( Product code:-CHANDRA/9W/W/B22),Bajaj,Wipro or any other approved make.

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of1000/1250A TPN Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 1350 X W-1800 X D-400MM. Assembly Charges of Aluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved / tested from the CPRI lab and should be confirm to I.S. 64139( EVA make or its eqivalent approved make)

The panel shall include the following switchgear & accessiories as per the Make of L&T, ABB,Legrand,Hager.

MATERIAL:

Incomer

MCCB 320 A 4p 36 KA TMR with O/L& S/C . E/F protection ( 1No.)

Spreader link MCCB 320 A 4p (2 Nos.)

Digital Metering Set (Detail Below)

Amp. Meter 96X96mm . 1 No.

Volt Meter 96X96mm . 1 No.

Current Transformer . 3 Nos.

Phase indicator lamp . 3 Nos.

Control SP MCB 3 Nos.

Terminal Strip . 1 No.

OUTGOING :

Indication Lamp LED Type (3 Nos.)

SP MCB 6A 10 KA 3 Nos.)

OUTGOING :

MCCB 100 A 4p 25KA TMR with O/L& S/C . E/F protection ( 6No.)

Spreader link MCCB 100 A 4p (12 Nos.)

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type L.T. Panel. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of1000/1250A TPN Aluminium Busbar ( Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1.0 Amp.) Aluminium shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 1650 X W-1800 X D-400MM. Assembly Charges of Aluminium/Copper solid/ Copper flexible wire interconnection Busbar to MCCB/ SWITCH & MCCB/ SWITCH to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. and the panel should be approved / tested from the CPRI lab and should be confirm to I.S. 64139( EVA make or its eqivalent approved make)

The panel shall include the following switchgear & accessiories as per the Make of L&T, ABB,Legrand,Hager.

MATERIAL:

Incomer

MCCB 200 A 4p 36 KA TMR with O/L& S/C . E/F protection ( 1No.)

Spreader link MCCB 200 A 4p (2 Nos.)

Digital Metering Set (Detail Below)

Amp. Meter 96X96mm . 1 No.

Volt Meter 96X96mm . 1 No.

Current Transformer . 3 Nos.

Phase indicator lamp . 3 Nos.

Control SP MCB 3 Nos.

Terminal Strip . 1 No.

OUTGOING :

Indication Lamp LED Type (3 Nos.)

SP MCB 6A 10 KA 3 Nos.)

OUTGOING :

MCCB 100 A 4p 25KA TMR with O/L& S/C . E/F protection ( 6No.)

Spreader link MCCB 100 A 4p (12 Nos.)

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

ARUN KUMAR SHARMA

KUMAR ELECTRONICS CO.

SHARMA ELECTRICAL CO.

SATISH SHARMA