Renewal of Canal Service road of RK Canal from KM 8.520 to KM 12.500

Providing , laying , spreading and compacting of stone aggragates 45-63 mm size in 75 mm compacted thickness to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stage to proper grade and camber applying and brooming ,stone screening, binding material to fill up the interstices of coarse aggregate, watering and compacting to required density grading -2 as per PWD specification .

Providing , laying , spreading and compacting of stone aggragates 22.4-53 mm size in 75 mm compacted thickness to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stage to proper grade and camber applying and brooming ,stone screening, binding material to fill up the interstices of coarse aggregate, watering and compacting to required density grading -3 as per PWD specification .

Providing and appying prime coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate 0.7 kg/Sqm using mechanical means as per Technical specification claue 502

Providing and applying tack coat with bitumen VG-10 pressure distributor at the rate of 0.30 kg. per sqm on the prepared bituminous / granular surface cleaned with hydrulic broom as per Techinical Specification No. 503. As direction by the E/I

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 11.20 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. as per Technical Specification Clause 510 (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510.

Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding 0.50 meter in depth and earth work in enbankment to be in 0.20m layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m lift and 30m lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m distance as directed by the E/I.