Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAdmitted-Fee/PreQual/Technical/Finance | ₹5.5 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹5.7 L+₹17,813.28 (3.23%)Admitted-Fee/PreQual/Technical/Finance | ₹5.7 L+₹17,813.28 (3.23%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | NANDANAN V K L2 | ASHRAF P K L1 |
|---|---|---|---|---|---|
| 1.00Maintenance work | |||||
| 1.00 | OD145473/2026-2027:Steel work for purlin/single section with MS pipes ,( round ,square ,rectangular hollow
tubes)including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer, including welding and bolted with special shaped washers etc. complete | 1,042.32 | kg | 162 ₹1,68,855.84 | 157.16 ₹1,63,811.01 Lowest |
| 1.00 | OD145472/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50) | 63.29 | sqm | 643 ₹40,695.47 | 622.81 ₹39,417.64 Lowest |
| 1.00 | OD145471/2026-2027:Providing and fixing precoated galvanised steel sheet roofing accessories 0.40 mm (+0.05 %)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using
self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 16 | metre | 391 ₹6,256 | 378.99 ₹6,063.84 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.44 | cum | 9,534 ₹4,194.96 | 9,235.97 ₹4,063.83 Lowest |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 3.6 | sqm | 399 ₹1,436.4 | 386.16 ₹1,390.18 Lowest |
| 1.01 | OD117568/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal, filling the joints with M sand etc. all complete as per the direction of Engineer-in-charge.(Modified DSR 16.68) | 62.6 | sqm | 1,097 ₹68,672.2 | 1,062.24 ₹66,496.22 Lowest |
| 1.01 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | 82 | metre | 272 ₹22,304 | 263.31 ₹21,591.42 Lowest |
| 1.01 | 50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend | 3 | no | 97 ₹291 | 93.52 ₹280.56 Lowest |
| 1.01 | 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | 64 | kg | 234 ₹14,976 | 226.96 ₹14,525.44 Lowest |
Tender Value
₹5.5 L
EMD Value
₹13,768
Closing Date
15 Sept 2026, 3:00 pmClosed
Office of Assistant Engineer Chengamanad GP
Office of Assistant Engineer Chengamanad GP
CHMD Project No - 52/2026-27 Anganavadi Maintenance Ward 4 Ward 8 Ward 3 Ward 6 Ward 19-In Chengamanad Grama Panchayath
2026_LSGD_867076_1
02/AE/Tender/2026-27
Open Tender
Civil Works - Others
Item Rate
Office of Assistant Engineer Chengamanad GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,215
₹13,768
Yes
16 Sept 2026
2 Sept 2026
16 Sept 2026
2 Sept 2026
15 Sept 2026
2 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Maintenance work | |||||
| 1.001 | OD145473/2026-2027:Steel work for purlin/single section with MS pipes ,( round ,square ,rectangular hollow
tubes)including cutting, hoisting, fixing in position and applying a priming coat of approved
steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.002 | OD145472/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.(Modified 12.50) | 1 | sqm | - | - |
| 1.003 | OD145471/2026-2027:Providing and fixing precoated galvanised steel sheet roofing accessories 0.40 mm (+0.05 %)
total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using
self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.004 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.005 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | - | sqm | - | - |
| 1.006 | OD117568/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal, filling the joints with M sand etc. all complete as per the direction of Engineer-in-charge.(Modified DSR 16.68) | - | sqm | - | - |
| 1.007 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | - | metre | - | - |
| 1.008 | 50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend | - | no | - | - |
| 1.009 | 9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding | - | kg | - | - |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.65 MB
viewsbdcompressed.pdf
Tender Documents • 0.63 MB
fot.pdf
Tender Documents • 0.25 MB
epay.pdf
Tender Documents • 0.24 MB
affidavit.pdf
Tender Documents • 0.24 MB
PA.pdf
Tender Documents • 0.26 MB
integrty.pdf
Tender Documents • 0.23 MB
BOQ_1468092.xls
BOQ • 0.33 MB
exten.pdf
PDF • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .