Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.2 L
EMD Value
₹4,500
Closing Date
29 Jan 2026, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Machinery Division kashmir
Executive Engineer Machinery Division kashmir
Re-development of Bore well 113 (Checki Chadoora) in district Budgam under National Saffron Misson
2026_PWDJK_299965_1
MDSK/TS/2025-26/84 Dated 06/01/2026
Open Tender
Miscellaneous Works
Percentage
10 days
checki Chadoora
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer Machinery Division kashmir
₹4,500
6 Jan 2026
6 Jan 2026
30 Jan 2026
6 Jan 2026
29 Jan 2026
6 Jan 2026
Provision for Dismantling /Extraction of Submersible Pump Motor assembly (3 hp of BW-113) along with approx 30 m flanged column pipes of dia 65 mm along with steel wire rope and submersible cable from well casing pipes using heavy duty tripod stand, chain pulley block etc. The pipes are to be clamped and then dismantled/extracted one by one after removing nuts, bolts, washers etc. The job is to be carried out utilizing the service of skilled manpower with utmost care without causing damaged to the eqipment.The job also includes checking all fittings, Pump holding steel rope.
Provision for Redevelopment of the Bore well scheme in accordance with IS-11189(1985) to establish maximum rate of usable water yield with required capacity air compressor. The Job includes targeted/ continuous delivery of compressor air at different depths/slots of casing pipe, till the desired quality and impoved discharge of water is obtained from the well. The job is to be carried out using Air compressor of pressure rating 1100psi with a delivery of 300cfm and pumping equipment of suitable capacity. The job includes charges on account of shifting of Men and Machinery to the site and operational charges like fuel for air compressor/ D.G set and establishment charges of staff.
Provision for Lowering of Submersible Pump Motor assembly (03 hp of BW-113) after redevelopment of the scheme. The job includes lowering of approx 30 m flanged column pipes of dia 65 mm along with new steel wire rope after replacing worn out nuts, bolts, washers etc. Checking of suction and delivery of pumping unit, bearing, impeller cleaning, removing of rust and silt. This also includes provision for conducting necessary repairs to the electric circuit.
Providing and fitting of 65 mm G.I column pipe 4.5 mm thickness duly flanged along with nuts bolts and washers inside the well .( Flange outer dia 190mm thickness 12 mm)
Providind and fitrting of submersible cable 3 core 6mm square
Providind and fitrting of 12 mm dia steel wire rope with U- clamps
Providing and filling of Gravel with Stone grit 6 mm (pea sized gravel ) as per site requirement.
Repairs to Horzontal Pump coupled with 10 HP motor AC -3 Phase by way of dismentalling of pump assembly , servicing and providing / fitting of Gland packing as per requirement.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
BOQ_973274.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .