Construction of section office for Koraput PH Section-I and II at Koraput under AAP for the year 2025-26

Supplying all materials, labour T&P for Construction of RCC frame structure single story with double storeyed Foundation (GF) Section,Office building including complete as per direction of EIC

Ground floor - Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. i) Column footing back side wall

ii) Wall footing

iii) Column footing

Filling foundation and plinth with sand watered and rammed

Cement concrete (1:4:8) with 4cm size hard granite metal.

Cement concrete M=25 for R.C.C. works with 20mm size hard granite chips including hoisting and laying.

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

i) Column base

ii) Column

iii) Pl. Bend

iv) Wall footing

v) Roof beam

vi) Roof Slab

1st class brick masonary using Fly ash bricks in cement mortar (1:6) in foundation and plinth

Ground floor Superstructure - Back side wall (C/C)

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge

Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

12mm. thick cement plaster (1:6) on brick work

16mm. thick cement plaster (1:6) for brick

Priming 1 coat with any approved primer

Wall painting 2 coat with plastic emulsion paint.

Wall painting 2 coat with Weather Coat paint

Fabricating, Supplying and fixing of M.S window grill made out of M.S flat 20mm x 4mm including labour charge for fixing etc complete (Data for a window opening of 0.90 x 1.20 = 1.08 sqm)

Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge.

i) Window

ii) Black Glass (6mm thick)

Providing fitting, fixing of ACP Door Aluminum composed panel including required Aluminum frame with all necessary fittings as per specification and direction of E.I.C

Supplying all materials, Labobour, T&P and fixing of PVC choukat with door including fitting and fixing of Aluminum aldrop, tower, bolt, door handle hinges etc.

Enamel Painting two coats on new Iron work / steel work

Plinth protection around the Ground floor. - Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Cement concrete (1:3:6) with 4cm size hard granite metal.

CC(1:2:4)with 12mm crusher brokn granite chips

Supplying all materials, labour and T&P for fixing of Tiles in floors including landing (verified tile) etc complete as per direction of EIC

Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes into dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete excluding cost of marble

Supplying all materials, labour and T&P for fixing of Tiles in walls and dados including landing (vertified tile) etc complete as per direction of EIC

Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes into dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete excluding cost of marble

Supplying all materials, labour and T&P for Construction of 110 mtr compound wall having brick wall with width 0.125mt but height 1.50mtr

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:3:6) with 4cm size hard granite metal

Random rubble stone masonry in cement mortar (1:6) in foundation and plinth

2.5cm thick damp proof course with C.C. (1:2:4) using 12mm size hard broken granite chips. .

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm)

12mm. thick C.P. in cement mortar (1:6) for brick work.

16mm. thick C.P. in cement mortar (1:6) for brick work.

Priming one coat with any approved primer

Painting two coats with approved weather seal coat in new or old wood work

Supplying all materials, labour and T&P for Electrical and Illumination work etc complete as per direction of EIC

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and modular ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , modular G.I box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard)

i) Group-A.

ii) Group-B

iii) Group-C

Point wiring for 5 / 6 amp modular socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular one way type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard)

S/F of 15A plug points with Modular switch on M.S box with bakalite cover of Havels/Std make including all connection.

S/F of 25A D.P MCB protected plug & socket with plastic cover of Havels/L&T/C&S make ncluding all connection.

S/F of Submain with following sizes of PVC S.C. Cu. FR wire in 20mm dia non-metalic pipe with all accessories. (Make of wire-Finolex/ Anchor/ Havells)

i) 1x1.5 mm2 for inverter wiring

ii) 2x1.5mm2 + 1x1.5mm2.

iii) 2x2.5mm2 + 1x1.5mm2.

iv) 2x4mm2 + 1x1.5 mm2

v) 4x10mm2+2x4mm2

S/F of 4way (4+12) double door D.Box with 1x63A.DP+3x32A DP 6x6A-32A of S.P MCB of Havels/HPL/Std//Anchor make

Supplying and fixing of call bell/Buzzer of ISI marked suitable for AC/DC of single phase including connection etc.

S/F of 48" 1200mm Orient New Hurricane-pearl Ivery/Usha-Aure Ivory/Havels-ES New (2 star)/C.G-H.S Décor plus Energy efficient/Bajaj-Esteem make

S/F of 5 step type electronic Fan regulator of cona Deluxe/Anchor Deluxe make.

S/F of 90W LED Street light fittings complete with G.I bracket ( Make Havels/Bajaj )

S/F of 20W LED Tube light fittings of Bajaj/Havels /C.G.make.

S/F. of 4Way single door D.Box with 4x6A-32A. SP M.C.B. of Havels/HPL/ Std./ Anchor make.

S/F. OF 2300VA U.P.S. of Microtek/Livfast make.

S/F. OF Tubular Battery of Exide-INV TUBULAR-IMTT1500/Livfast-MXSTT 1851 150AH 12V make.

S/F. of 300mm Vantilator/Exhaust fans of Orient-300 mm Spring Air/USHA Aeroclean 300MM Goodbye Oil and Dust Metal Exhaust Fan for Kitchen(Metallic Grey)/Havels-Ventil Air DSP /Crompton-Drift Air Plus make.

S/F of standard earthing confirming to IS-3043/1987 including of S/F of 38mm/40mm dia heavy duty G.I pipe 3 mtrs long confirming to IS-1239/part-i/1990. The pipe shall have 12m dia perforated holes at 15cm interval center to center upto 2.5mtrs height from the bottom to upper end threaded and fitted with 38mm/40mm dia G.I flange with provision of holes for making connection to earth continuity wire,complete with measonary works.

S/F of 25 watt solar LED street light including solar panel. 6mtr hight 3" dia G.I. Pipe, battery with errection of G.I. Pipe with resting and commision as per specification and direction of E.I.C

Supplying all materials, labour and T&P for Construction of Internal PH work etccomplete as per direction of EIC

Supplying all materials, labour, T&P for fixing PVC waster storage tank including cutting holes through the tank and fixing G.I. pipes and fittings and providing extra socket, jam nut, fixing ball valves etc. including hoisting up to a height of 5mtr. above ground level and placing the tank to the required position all complete as per specification and direction of Engineer in charge including cost of PVC tank and ball valves, copper ball etc. complete.

i) 2000 liter PVC Over head tank three layer sintex plasto equavalent

Supplying all materials

,labour and T&P for construction of staging for O.H.service tank(PVC) on the existing roof of the building as per drawing, specification and direction of Engineer-in-charge etc all complete

i) Staging for 2000ltrs O.H.service tank

Supplying all materials, labour and T&P and laying in trenches, HDPE pipes the following nominal diameter and fittings including testing as per specification all complete.

i) 1" dia HDPE pipe

Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete

i) 25mm.dia PVC pipe [Sch-80.]

ii) 15mm.dia PVC pipe [Sch-80.]

Supplying all labour and T&P for fixing C.P. fittings of the following size as per specification all complete

i) 15mm. dia.C.P. Bib cock(Long body) (Make- Cera, Jaguar, Hindware)

ii) 15mm. dia. CP 2 in 1 bib cock cock (Make- Cera, Jaguar, Hindware)

iii) Jet Spray S.S. Jet (Make- Cera, Jaguar, Hindware)

iv) 15mm.dia.C.P. stop cock (concealed) (Make- Cera, Jaguar, Hindware)

v) 15mm. dia.C.P.Angle cock (Make- Cera, Jaguar, Hindware)

vi) 25mm.dia.G.M.fullway valve (Make- Cera, Jaguar, Hindware)

Supplying all materials,labour and T&P for fixing water closet (I.W.C. or E.W.C) duly embedded in cement concrete (1:3:6) using 12mm. size h.b.g. chips

i) E.W.C (Make- Cera, Jaguar, Hindware)

ii) Orissa pan (Make- Cera, Jaguar, Hindware)

iii) "P" Trap

Supplying all materials,labour and T&P for fixing 10 ltr capacity low level cistern with fitting such as siphonic arrangement,15mm. nominal size PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification. (Make- Cera, Jaguar, Hindware)

Supplying all materials,labour and T&P for fixing cromium plated brass shower rose with 15mm. or 20mm. inlet including polishing etc. all complete as per specification

i) 100/50mm.dia Shower rose with arm (Make- Cera, Jaguar, Hindware)

Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification

i) Wash hand basin (550x450mm.) (Make- Cera, Jaguar, Hindware)

ii) Pedestal for Wash hand basin (Make- Cera, Jaguar, Hindware)

Supplying all materials,labour and T&P for fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification (Make- Cera, Jaguar, Hindware)

Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (600x350mm.) with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:3:6) using 12mm. size h.b.g. chips all complete as per specification (Make- Cera, Jaguar, Hindware)

Supplying all materials,labour and T&P for fixing (600mmx450mm.) bevelled edge mirror of superior glass mounted on 6mm. thick A.C. sheet or ply-wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification

Supplying all materials,labour and T&P for fixing standard size C. P. towel rail, soap holder etc. fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.

i) C.P. towel rail (20mm.diax600mm.) (Make- Cera, Jaguar, Hindware)

ii) C.P. towel ring (Make- Cera, Jaguar, Hindware)

iii) C.P.Soap holder (Make- Cera, Jaguar, Hindware)

iv) Al.Glass self (600x150mm.) (Make- Cera, Jaguar, Hindware)

v) Urinal spreader (Make- Cera, Jaguar, Hindware)

vi) 15mm.diax450mm.PVC connection

vii) 40mm dia waste pipe

Supplying all materials,labour and T&P for constructing septic tank with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:2:4 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification

i) 20users'Septic Tank size [2.0x0.9x1.80mtr.]

Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete.

Supplying all materials,labour and T&P for constructing Man-hole chamber with R.C.C. top slab in (1:1.5:3 ) mix with foundation concrete (1:3:6 ) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),brick work with K.B. bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification.

Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x2.55mtr. Deep soak-way pit with dry brick walling up to 2.10mtr. height and bbrick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab, 50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing.

Supplying all materials, labour & T&P for laying of PVC pipe sewer line in trenches including earth work in all kinds of soil and refilling the same intrenchs, providing C.C.bed concrete in C.C. (1:4:8) using 40mm H.G. metal for a thickness of 0.10mtr & providing C.C. blocks in C.C. (1:2:4) using 12mm size C.B.H.G chips of size 0.55 x 0.25 x 0.30m in each 1 (one) mtr interval including cost and conveyance of all materials to site, royality taxes and curing etc all complete as per PHD & PWD specification and direction of E.I.C

i) 110mm dia PVC Pipe

Supplying all materials,labour and T&P for fitting and fixing of following PVC fitting all complete as per specification and direction of E.I.C.

i) 110mm PVC cowl

ii) 110mm PVC vent pipe

iii) 110mm PVC Tee