ARC work of Attend the cable fault at site within 03 HRS from receiving the message from D.E OF concern S/DN AND Locating the Fault underground Cable for ALL scheme in the jurisdiction of Sayan S/dn of KIM Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

ARC work of Attend the cable fault at site within 03 HRS from receiving the message from D.E OF concern S/DN

AND Locating the Fault underground Cable for ALL scheme in the jurisdiction of Sayan S/dn of KIM Division.

Item Code No. Description Unit Rate Amount

Labour charge for excavation of cable trench of 400mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

1 9925000001 240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 600mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

2 9925000002 240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 400mm width x Meter

1500mm depth, in any type of soil for laying of cable of size up to

3 9925000003 240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to Meter

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Outer), thickness

mm, 1.0 meter long RCC half round muffs and providing and fixing of

4inch width yellow colour polyethylene tape with printing"CAUTION

ELECTRIC CABLE BELOW' at 0.75 m depth from ground surface

after laying cable in trench. This will provide indication that electric

cable is passing underground so as to protect cable from mechanical

injuries, refilling the same, as per Instruction of E gineer in Charge

Labour charge for horizontal drilling using Auger machine without Meter

damage to surface road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm 0.D. 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to

5 9925000005 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe).

The detail map obtained from HDD machine and excel sheet hard

and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment for HDD is must require to be

submitted. HDD to be carried out at depth 1.5 mtrs to 2.0 mtrs as per

site conditions and as er instruction of EIC.

File No: DGVCLDOKI/TND/e-file/6817/2026/3418/Technical

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0062/07/2026 Approved Date: 03-07-2026 01:57

Labour charge for horizontal drilling manually without damage to Meter

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-

4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as per

Site Condition (excluding cost of pipe). The detail map and excel

sheet (hard and soft copy) indicating the respective depth and

distance from adjacent landmark for each segment of cable to be

submitted. Drilling to be carried out at depth Minimum 1.2 mtrs to

mtrs as per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm Meter

7 9925000007 thickness H.D.P.E. pipe confirms to IS 4984 and BIS certification for

laying of underground 11KV/ 22KV XLPE cable up to 240 mm 2 size.

Labour work for RCC concreting on disputed location and repairing CMT

of damage portion of road crossing for the work carried out for roads

crossing as well as concreting & muffing of poles including all

Providing & fixing concrete stone route marker of 300 mm width x No

150 mm thick x 650 mm height embedded in earth at least 300 mm

below & 350 mm above ground level respectively at distance approx.

50 meters along the length of cable. The RCC concreting (1:2:4)(all

necessary materials will be in bidder's scope) of route marker is to

be carried out 300 mm width x 150 mm thick x 300 mm below

ground level as per instruction of EIC. The route marker should be

with name of company with approved yellow colour-DGVCL. The

distance from marker to cable and cable depth with feeder name

etc., marked with arrow sign is to be painted on it. The route marker

is to be fixed at location near to any fixed permanent location (not

necessary to fix exact on top of cable) as per instruction of EIC.

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to perJob

240 mm 2 on DP Structure with fixing of 02 Nos polymer cleats on

10 9925000014 top and middle part. Polymer cleats, nut bolts etc. fixing material to

be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class4,Green color, 110mm O.D. perJob

8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical

protection of cable by inserting the cable inside HDPE pipe. The

HDPE pipe shall be erected in such a way that 300mm shall be

below the ground level and the rest 2700 mm shall be supported on

the DP Structure with 01 No Polymer cleat. All materials including

polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI No

pipe with pit to be filled with salt & coke and construction of chamber

12 9925000016 as per DGVCL Drg. No. dg /100 for DP and cable. The earthing pit

should be joined with cable by G.I. strip of size 1" width & 2 mm

thick. All material GI pipe, Coke Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for up No

13 9925000017 to 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end terminations (outdoor) for up No

14 9925000018 to 22 kV 3C x 185 mm 2 size XLPE cable ( as per DGVCL technical

Supply & fixing of heat shrinkable type end terminations (indoor) for No

15 9925000019 up to 11kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end terminations (indoor) for up No

16 9925000020 to 22 kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

File No: DGVCLDOKI/TND/e-file/6817/2026/3418/Technical

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0062/07/2026 Approved Date: 03-07-2026 01:57

Supply & fixing of heat shrinkable straight through joint for up to No

17 9925000021 11kV 3C x 185 mm 2 size XLPE cables as per DGVCL technical

Supply & fixing of heat shrinkable straight through joint type for up to No

18 9925000022 22kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

Labour charge for excavation of 2100mm long x 1200mm wide x No

1200 mm deep joint pits for installation of 11kV / 22kV Straight

19 9925000023 through joints as per instruction of engineer-in-charge & covering the

cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV No

XLPE cable after removal of semi conducting layer and applying of

PVC heat shrinkable antitracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long barrel heavy duty up to

20 9925000024 sq mm lugs, Aluminium bus connector. Taping with PGclamp for bus

conductor as per drawing and as per instruction of EIC. The

Allurninium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope.

Testing of cable at various points and commissioning the feeder as No

21 9925000025 per instruction of engineer-in-charge.Test result shall be submitted

by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout Set

22 9925000026 drawings with GIS mapping as per actual cable routing showing road

crossing, HDPE pipe sleeving, jointing locations, markers etc.

To Attend the cable fault at site within 03 hrs from receiving the No

23 9925000047 message from D.E of concern S/dn and locating the fault under

TOTAL AMOUNT :-Twenty Four Lacs Only 24,00,000/-

TOTAL AMOUNT :-Twenty Four Lacs Only 24,00,000/-

Executive Engineer (O&M)

DGVCL, KIM IND DIVISION.

File No: DGVCLDOKI/TND/e-file/6817/2026/3418/Technical

Approved By: Executive Engineer,Technical,DGVCLDOKI