Repairs to Departmental Truck No JK06 3418

Amount

Dismantling of 4 wheels (F & R) extracting worn out parts, repairing by way of p/f of new parts i.e. front wheel brgs. Inner – 02nos. front wheel brgs. Outer – 02nos. Rear wheel brg. Inner – 02nos. rear wheel brgs. Outer – 02nos. front wheel / rear wheel oil seals – 02nos. each. Grease – 7Kgs (Pensol Spl,) also repairs to the brake system by way of p/f of brake lining sets, brake drum, chuck nut – 02nos., brake shoe – 02set., anchor plate – 02nos., king pin set, upper and lower thrust brg. Set, brake spring – 02nos. brake oil, rivets, cylinder kit, etc. Complete job including cost of material & labour charges.

Repairs to the radiator by flushing upper and lower tanks with caustic soda, soldering its leaking tubes, straightening the fins, replacement of leaking hoses and then reassembling after checking leakage. Also repairs to the fuel system by servicing to fuel tank by cutting and then welding, replacement of fuel pipes, injector pipes with new ones. Complete job including cost of material and labour charges.

Repairs to gear system of the vehicle by P/F of roller brg, sleeve brg, synchronizing rings, gear box oil sets, cotter, coupling, twin gear, reverse gear, 2nd gear, gear box joint set, counter shaft, fitting of gears by using hydraulic press. Complete job including cost of material and labour charges.

Repairs to the clutch system, checking and testing it, P/F of new clutch plate, pressure plate, clutch release brg, clutch forks, fly wheel ring etc. Complete job including cost of material and labour charges.

Complete washing of the vehicle at service station by using washing powder and k. oil for removal of grease and oil stains, painting of the body show, cabin and chasis outside and inside with one coat of metallic primer. Filling of body with body shoulder for smooth surface and then finishing with fine sand paper for painting, then applying two coats of recommended blue paints including letter writing. Complete job including cost of material and labour charges.

Complete periodic maintenance of the vehicle by way of draining of old engine oil, filter set and P/F of new engine oil.15W-40,API CH4/CI4:12 ltrs, Differential oil 80W90 ,GL-5 Grade:12 Ltrs, Gear oil 80W90 or 85w-140 8Ltrs,Hydraulic brake oil DOT 4 0.9 l, Power steering oil Dexron-II-D 1.4 L, Coolant/antifreezes, ethylene glycole Antifreeze:9L,engine oil filter set:01 set, air filter set:01 no., fuel filter set 01 no.The job includes cost of material, labour, Carraige and taxes. Complete job. The quoted/uploaded rates of items/job should be after the deduction of cost on account of old parts/old material/lubricant.

The king pin assembly is essential for a vehicle’s steering, allowing the axle and steering knuckle to pivot. The repair process begins with disassembling the suspension, steering linkages, and removing the steering knuckle. The worn king pin and bushings are then extracted using specialized tools. New King pins LHS and RHS are installed, lubricated, and sealed to reduce wear. The steering knuckle and suspension components are reassembled, followed by reconnecting the steering linkage. Finally, alignment is performed to ensure proper steering function. This critical procedure ensures smooth handling and safe vehicle operation. Regular maintenance prevents premature wear and steering issues.

HSD for journey of vehicle from Khellani workshop to Narwal and back to Khellani including its testing at Jammu.

R M ENTERPRISES (BID ID -2284216)

KANT AUTOMOBILES (BID ID -2285206)