Renovation of Community Centre in HKB Circle, Jagadhri.

Amount

Dismantling white or coloured glazed tiles ( to be carefully removed)

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled:- Doors

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled:- Window

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled:- Celestary window

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - Door and window frame size 127 mm X 50 mm with 40 mm wide double Rebate

Teckwood 25mm planking tongude and grooved in flooring including fixing with scrcws complete

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF THREE URINALS LARGE FLAT BACK OR ANGULAR LIPPED FRONT 610MM HIGH IN VITREOUS CHINAWARE WITH ONE NO. 10 LITRES CAPACITY BEST INDIAN MAKE C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE ETC.COMPLETE as fully described in item no.30.25 above.Range of three urinals White

First class brick work laid in cement sand mortar 1: 3 in first storey upto 4 metres above plinth level.

12 mm thick cement plaster 1:4

Providing and fixing Ist quality ceramic glazed wall tiles conforming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. Size of ceramic Glazed tiles 300 × 450mm

Providing and fixing vitrified tiles of size 600 × 600 mm of approved make in Skirting/dado laid in any pattern as specified over base of 12 mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles.

Providing and fixing ceramic tiles/anti skid tiles of size 400mm × 400 mm or above size of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles.

Factory manufactured panelled door or gla-zed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc. (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, ton- gued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but inc- luding labour for fixing the same in position)- 30 mm thick

Scrapping: white wash and colour wash

Distempering: Preparation of plastered surfaces for distempering including sand papering the surface, applying filling with appro- ved quality filler, consisting of plaster of paris and chalk mitti including finish- ing the surface to the required finish complete.

Distempering with dry distemper (of approved manufacture ) two coats on old distempered work (when shade is changed)

Finishing walls with exterior decorative cement based paints such as snowcem Robbiacem etc. on old work, one coat to give an even shade.

Painting on wooden Surface: Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, lin- seed oil, varnish and chalk mitti includeing finishing the surface to required finish complete. with 2nd quality paint.

Applying pink primer or aluminium pri-ming coat on wood work including preparation of surface, knotting and stopping etc. with 1st quality paint

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.with 1st quality paint.

SANITARY FITTINGS: WATER CLOSET SUITES: PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT WITH NONCONCEALED ‘P’ OR ‘S’ TRAP with or without vent and all other necessary fittings as fully described in item no.30.3 above. Single Colour

LAVATORY SUITS: PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE LAVATORY SUITES (ANGLE BACK) IN VITREOUS CHINAWARE and all other necessary fittings as fully described in item no.30.41 above. Size 530 mm X 430mm with one no. tap

PROVIDING AND FIXING IN POSITION ON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TAP FOR LAVATORY SUITE

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D IN-LET. C.P. brass with revoiving joint

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE PAPER HOLDERS FIXED INTO wall with C.P. brass screws complete in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (a) C.P. Brass

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. 25 MM DIA C.P.BRASS ADJUSTABLE 750 mm long

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWAL PLUGS WITH C.P.BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOODS THE WALLS ETC. With C.P. brass brackets and guard rail (ii) 530mm x 125 mm

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc. C.P. brass (i) Soap dish large

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. INDIAN MAKE ) 600mm X 450mm

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE COAT AND HAT HOOKS fixed into wall with C.P. brass screws and rawl plugs etc. COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. C.P. BRASS Two way

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). (a) Bib cock long body

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). Short Body Bib cock

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineerin-charge) 15 MM STOP COCK Concealed stop cock with flange

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE C.P.BRASS INLET CONNECTION 15 MM WITH 375 MM PIPE AND C.P. BRASS NUTS

Providing and fixing in position super quality 65mm i/d opening C.P. brass dome type hinged grating weighing about 750gms, fixed in cement mortar 1:2 complete in all respects (as required by the Engineer-in-charge)

Providing and fixing medium density fibre board (MDF) interior grade in plain lining but jointing including wooden plugs (hard wood), placed at 45 cm to 60 cm, complete with necessary nails ( frame work shall be payable extra)

Providing and fixing plastic laminated sheets thickness, not less than 1.5 mm (conforming to I.S. specification), includeing cost of approved adhesive complete- natural finish

Providing and fixing glazing in aluminium door windows, ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). With float glass panes of 5.0 mm thickness.

Vinod Kumar

STAR CASPION