Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹74.9 LAccepted-AOC | 1 | Accepted-AOC LOWEST QUOTED | |
| 2 | 2₹77.7 L+₹89,260.20 (1.16%)Rejected-AOC | 2 | Rejected-AOC NOT THE LOWEST QUOTED | |
| 3 | 3₹78.4 L+₹1.6 L (2.08%)Rejected-AOC | 3 | Rejected-AOC NOT THE LOWEST QUOTED | |
| 4 | 4₹78.7 L+₹1.9 L (2.48%)Rejected-AOC KALAPPURAYIL NO 460 PAMPAKUDA PO ERNAKULAM 686 667 | ERNAKULAM | ERNAKULAM | KERALA | 686667 | 4 | Rejected-AOC NOT THE LOWEST QUOTED |
Tender Value
Refer Docs
EMD Value
₹87,570
Closing Date
12 Dec 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DY.MANAGER(COMMERCIAL)
THE KERALA CERAMICS LTD, KUNDARA, KOLLAM, KERALA
ELECTRIFICATION OF THE CAPACITY STABILISATION PROJECT
2022_TKCL_533149_1
57E/PS/1519/22-23
Open Tender
Equipments
Supply and Service
60 days
THE KERALA CERAMICS LTD, KUNDARA
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,500
Yes
₹87,570
Yes
15 Feb 2023
25 Nov 2022
14 Dec 2022
25 Nov 2022
12 Dec 2022
25 Nov 2022
L.T. PANELS :Supply,Installation, testing and commissioning of following L.T. panel boards Compartmental cubicle type, freestanding with appropriate cable entries, with Aluminium busbars & manufactured based on IS 8623,unloading, shifting, unpacking, Section assembly from storage place to desired Installation.All required protections will be as per Tender technical specification & tender electrical SLD. Including all labour charge, cost of material and all safety precausions, etc.
MCC 5 (As per Scheme MCC 5)
Modification in existing main panel by adding equivalent rating of MCCB and repalcing existing CTs with suitable rating (As per Scheme MSB )
Modification in existing sub panel (SSB 2) by replacing exisitng 32A/63A MCCB - 2Nos. With 100A TP MCCB- 2Nos.
Supply and installation of motor testing starter panel with 75HP star delta & DOL starter, 10HP DOL starter and necessary components.
LT CABLES: Supply,Laying,Testing and Commissioning of 1100V grade L.T. XLPE insulated multistrand Al./ Cu. conductor cables on provided prefabricated trays/ pipe/ in trenches with necessary clamps, identification tag. & all other items required to complete the work. (Note:-Actual cable lengths shall be measured at per site requirement. Refer tender data sheet& specifications for requirement of Cables Including all labour charge, cost of material and all safety precausions, etc.
3.5 C X 400 sq.mm XLPE Al. armoured cable
3.5 C X 240 sq.mm XLPE Al. armoured cable
3.5 C X 185 sq.mm XLPE Al. armoured cable
3.5 C X 50 sq.mm XLPE Al. armoured cable
3.5 C X 35 sq.mm XLPE Al. armoured cable
4 C X 16 sq.mm XLPE Al. armoured cable
4 C X 10 sq.mm XLPE Al. armoured cable
3 C X 95 sq.mm XLPE Al. armoured cable
3 C X 70 sq.mm XLPE Al. armoured cable
3 C X 50 sq.mm XLPE Al. armoured cable
3 C X 25 sq.mm XLPE Al. armoured cable
3 C X 16 sq.mm XLPE Al. armoured cable
3 C X 10 sq.mm XLPE Al. armoured cable
3 C X 4 sq.mm XLPE Al. armoured cable
3 C X 1.5 sq.mm XLPE Cu. armoured cable
4 C X 1.5 sq.mm XLPE Cu. armoured cable
10 C X 1.5 sq.mm XLPE Cu. armoured cable
16 C X 1.5 sq.mm XLPE Cu. armoured cable
19 C X 1.5 sq.mm XLPE Cu. armoured cable
24 C X 1.5 sq.mm XLPE Cu. armoured cable
3 C X 2.5 sq.mm XLPE Cu. armoured cable
Supply and laying following size unarmoured flexible copper wire including reinforced flexible hose. Including all labour charge, cost of material and all safety precausions, etc.
a) 6 run 35 Sq.mm
b) 6 run 16 Sq.mm
c) 6 run 10 Sq.mm
LT cable Termination: Supply & making of Termination of XLPE insulated, PVC sheathed, 650/1100 V grade, armoured cable including stripping of cable insulation, supplying and fixingof Aluminum/ tinned plated copper lugs and crimping the same to the conductor, supply and fixing of double compression cable glands including all 'labour supply and consumable material required for jointing / terminations
3.5 C X 400 sq.mm XLPE Al. armoured cable
3.5 C X 240 sq.mm XLPE Al. armoured cable
3.5 C X 185 sq.mm XLPE Al. armoured cable
3.5 C X 50 sq.mm XLPE Al. armoured cable
3.5 C X 35 sq.mm XLPE Al. armoured cable
4 C X 16 sq.mm XLPE Al. armoured cable
4 C X 10 sq.mm XLPE Al. armoured cable
3 C X 95 sq.mm XLPE Al. armoured cable
3 C X 70 sq.mm XLPE Al. armoured cable
3 C X 50 sq.mm XLPE Al. armoured cable
3 C X 25 sq.mm XLPE Al. armoured cable
3 C X 16 sq.mm XLPE Al. armoured cable
3 C X 10 sq.mm XLPE Al. armoured cable
3 C X 6 sq.mm XLPE Al. armoured cable
3 C X 4 sq.mm XLPE Al. armoured cable
3 C X 1.5 sq.mm XLPE Cu. armoured cable
4 C X 1.5 sq.mm XLPE Cu. armoured cable
10 C X 1.5 sq.mm XLPE Cu. armoured cable
16 C X 1.5 sq.mm XLPE Cu. armoured cable
19 C X 1.5 sq.mm XLPE Cu. armoured cable
24 C X 1.5 sq.mm XLPE Cu. armoured cable
3 C X 2.5 sq.mm XLPE Cu. armoured cable
Supply and providing glanding for the following unarmoured copper cable
a) 35 Sq.mm
b) 16 Sq.mm
c) 10 Sq.mm
Motor Terminal Box Supply and installation of motor terminal box for following size belt loaded motors Including all labour charge, cost of material and all safety precausions, etc.
Earthing System
Providing earthing stations at locations as called for including providing and laying 1200mm x 1200 mm x 12 mm thick C I Plate. electrode with 50 x 6 mm thick G.I. strip, To form earth electrode with inspection chamber,Watering funnel with 20 gauge G I wire ,600 x600 mm heavy duty Chamber with CI Manhole cover etc.(Scope including excavation by manual/Machines /Boaring, Charcoal, salt, or Bentonie slurry etc)Including all labour charge, cost of material and all safety precautions, etc.
Earthing System: Providing earthing stations at locations as called for including providing and laying 2.5 Mtr Long x 50 mmDia G.I. electrode with 25 x 6 mm thick G.I. strip, To form earth electrode with inspection chamber,Watering funnel with 20 gauge G I Sheet ,600 x600 mm heavy duty Chamber with CI Manhole cover etc.(Scope including excavation by manual/Machines /Boaring, Charcoal, salt, or Bentonie slurry etc)Including all labour charge, cost of material and all safety precautions, etc.
Supply, installation, testing of GI/ Cu. earthing strips & wires in ground at a depth of 600 mm. or in ready made trenches or on ready tray with necessary clamps & bimetallic strips as per specification. (excavation required for this will be measured separately.) Refer layout & tender spec for various applications Including all labour charge, cost of material and all safety precautions, etc.
1) 50x10 GI strip
2) 40 x 6 GI Strip
3) 25X6 GI Strip
4) 25 X 3 Cu Strip
5) NO.4 SWG Copper
6) NO.6 SWG Copper
7) NO.8 SWG Copper
8) NO.10 SWG Copper
10) Earth Bench (25X3) 50 cm
Hot Dipped Galvanized Iron Cable Tray( Ladder Type): Supplying and installing following size of ladder type pre fabricated Hot Dipped Galvanised Iron cable tray with cross member (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required./erection on overhead structures in open areas / through fabricted supports inside plant; Including all labour charge, cost of material and all safety precautions, etc.
150 mm width
300 mm width
450 mm width
600 mm width
Supply & Installation of M.S. ladder type cable tray made from suitable angle iron frames and cross beams, painting with two coats of zinc chromate primer and two coats of enamel paint as required. Including all labour charge, cost of material and all safety precausions, etc.
Supply & Installation of FRP ladder type tray
Supply, fabrication & installation of suitable structures in MS for erection of cable trays over head in open area as well as inside factory building.Painting the same with two coat of Zinc chomate primer and two coat of enemel paint as required.
Supply ,fabrication and erection of suitable size of platform for pannel erction in MS with supports from ground .Cover platform open space using 5 MM chequered MS plate by proper bolting / welding . Painting the same with two coat of Zinc chomate primer and two coat of enemel paint as required.
Supply installation testing and commissioning of push button stations (remote) near by equipments
Weather proof model near equipment in open area. (model approval to be obtained from M/s.TKCL before procurement)
Supply, installation, testing and commissioning of VDBs, LDBs & PDBs as given below
Supply and installation, testing and commissioning of 12Way TPN MCB DD VDB with incoming 63A 4P isolator & 40A TP MCB -6 Nos. 32A TP MCB -6 Nos.
6Way TPN MCB DD DB with incoming 40A 30mA ELCB + MCB-1No & 6/10/20A SP MCB -18Nos. As outgoing
6Way TPN MCB DD DB with incoming 40A 100mA ELCB + MCB-1No & 10/16/20A SP MCB -18Nos. As outgoing
Wiring
Wiring with 2x2.5 Sq.mm FRLS PVC insulated 1100V grade copper wires and 1 x 1.5 FRLS PVC insulated earth wire in 2mm thick FRLS PVC conduit.
Wiring with 3x4 Sq.mm FRLS PVC insulated 1100V grade copper wires and 1 x 1.5 FRLS PVC insulated earth wire in 2mm thick FRLS PVC conduit.
Wiring with 2 x 1.5 Sq.mm FRLS PVC insulated 1100V grade copper conductor wires and 1 x 1.5 FRLS PVC insulated earth wire in 2mm thick FRLS PVC conduit.
Point Wiring: Wiring with 2x1.5 FRLS PVC insulated 1100V grade copper conductor wires and 1 x 1.5 FRLS PVC insulated earth wire in 2mm thick FRLS PVC conduit upto 8 Mtr. Including all labour charge, cost of material and all safety precausions, etc.
One light point controlled by one switch
Two light point controlled by one switch
Three light point controlled by one switch
Ceiling fan point controlled by one switch
6Asocket with 6A switch in independent position excluding wiring
6Asocket with 6A switch in combined position
Supply and installaltion following metal clad sockets with MCB
32A 3 phase Metal clad socket with 32A TP MCB
32A 1 phase Metal clad socket with 32A TP MCB
20A 1 phase Metal clad socket with 20A SP MCB
Supply and installation of 16A Power socket with switch
Supply and laying following conduits
20mm PVC conduit
32mm PVC flexible conduit
Supply and installation of following
Light terminal boxes
Industrial type 60W LED light fittng with supporting
200W LED flood light fittng with supporting
1 x 18/20W LED tube light fixtures
Supply, installation, testing and commissioning of 9mtr high hot dip galvanised octagonal street light pole with 130mm bottom A/F & 70mm top A/F made out of 3mm thick HT sheet along with base plate of size 200 x 200 x 16mm thick. PCD - 20mm with supply of 4 nos. of M20x 600 long j type EN 8grade foundation bolts along with template PCD 200mm including 1mtr long hot dip galvanised single arm standard bracket made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/F, terminal box and interconnections. Including all labour charge, cost of material and all safety precausions, etc.
Supply and installation of 2 Ton 5 star inverter type AC with stabilizer, outdoor unit if necessary, drain pipe etc. complete Location: Electrical substation, Ofice room- MD
Supply and installation of 1 Ton 5 star inverter type AC with stabilizer, outdoor unit if necessary, drain pipe etc. complete Location: Laboratary, Control room
KSEB/EI
Testing of CT/PT unit & TOD meter at TMR division of KSEB, Thirumala including getting letter to TMR division from local section of KSEB, up and down transportation of the unit, obtaining of test certificate from TMR etc. complete (excluding satutory and sundry charges)
Power Enhancement :-Preparing power allocation application and related documents for submitting to KSEB, arranging inspection by KSEB officials and giving assistance for obtaining power enhancementfrom KSEB
Completion Report/HT Agreement:- Preparing completion report/HT agreement and related documents and submitting to KSEB for obtaining power sanction under section 44 of Indian Electricity Act 1948,arranging inspection by KSEB officials upto the level of A.E/ Dy.Chief Engineer excluding statutory and Sundry charges.
Completion Report/LT Agreement:- Preparing completion report/LT agreement and related documents and submitting to KSEB for obtaining power sanction under section 44 of Indian Electricity Act 1948,arranging inspection by KSEB officials upto the level of A.E/Executive Engineer excluding statutory and Sundry charges.
HELSA ELECTRICALS PVT LTD
VIJAYA ELE TECHS PRIVATE LTD.
Leela Electricpower Services Pvt.Ltd
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_773027.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .