Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹19.5 Cr
EMD Value
₹19.5 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (R & B) Division, Bharuch
Resurfacing of Samdi Kelod Tralasa Tralsi Derol Road K.m. 0/000 to 15/700 (VR) Dist. Bharuch
361185
17 Of 2026-27
Open
Civil Works - Roads
Works
Bharuch
17 documents required · 16 mandatory · 1 optional
₹18,000
Executive Engineer, Bharuch (R & B) Division, Bharuch
₹19.5 L
30 Oct 2026
30 Oct 2026
30 Oct 2026
20 Nov 2026
30 Oct 2026
90 days
Bill of Quantity
Memorandum showing items of work to be carried out
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Clearing and grubbing road land including
uprooting trunk vegetation, grass bushes, shrubs,
saplings and tree girth up to 300 mm, removal of
1 stumps of trees cut earlier and disposal of 8.12 Hec. 28393.04
unserviceable materials (C) by mechanical means
in area of light jungle
Dismantling of cement concrete pavement by
mechanical means using pneumatic tools,
breaking to pieces not exceeding 0.02 cum in
volume and stock piling at designated locations
2 and disposal of dismantled materials up to a lead 9960.00 Cum 645.39
of 1000 metres, stacking serviceable and
unserviceable materials separately
Natural Granular Sub base soil consisting of 25 %
soil & 75 % Gravel and Coarse Including
breaking clods, mixing gravel/coarse sand by
Machanical Means, Dressing with all lead & lift
and inculding watering rolling and consolidation
of subgrade in layers at O.M.C to required dry
3 density inculding filling the depression which 8068.00 Cum 888.80
occur during the process using power roller 8T to
10T.(C) From Borrow area within 3.0 KM Lead.
Construction of 150 mm thick Compacted
Granular Sub Base (Grade-V, Crushed BT
Material of 53 mm to 26.50 @ 35%, 26.50 mm to
providing Close Graded Matrial, Mixing in a
Machanical Mix Plant at OMC, Carriage of a Mix
4 Material to Work site, Spreading uniform Layers 8068.00 Cum 1977.58
with motor Grader on Prepared surface and
Compacting With Vibratory Power roller to
Achieve desire Density, Complete clause as per
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Earth work for embankment including breaking
clods, dressing with all lead and lift including
watering, rolling and consolidation of sub grade
in layers at O.M.C to required dry density
including filling the depression which occur
during the process using vibratory roller 8 to
Tonne (E) From borrow area within 3.0 Km. lead
Providing and laying 50 mm thick compacted B.
M. with B.T. aggregate as per MORT&H
specification using Emulsion grade RS-1 for coat
at 2.5 Kg./10Sq.mt. with mechanical sprayer and
bitumen grade VG-30 for mixing at the rate
34.0Kg/M.T. i.e. 3.4 % of total mix including
heating the aggregate and asphalt by drum mix
6 plant and spreading the same by paver finisher 998.30 M.T. 4254.12
and consolidation with vibratory roller including
providing all materials, equipments, tools and
plants, oil, kerosene, fire wood, labour charges
Providing and laying quarry spall of approved
quality including spreading, watering
7 consolidation with vibratory roller including 4710.00 Cum 1436.22
loading and unloading etc. complete.
Rolling and consolidation of soling including
filling in depression which occur during the
8 process, with power roler 8 tonne to 12 tonne. 49800.00 Sqm 22.36
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Construction of dry lean cement concrete 100 mm
thick Sub- base over a prepared sub-grade with
coarse and fine aggregate conforming to IS:
the size of coarse aggregate not exceeding 25 mm,
aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per
table 600-1,cement content not to be less than
kg/cum, optimum moisture content to be
determined during trial length construction,
concrete strength not to be less than 10 Mpa at
days, mixed in a batching plant, transported to
9 site, laid with a Slip form paver with electronic 5229.00 Cum 3411.78
sensor, compacting with 8-10 tonnes vibratory
roller, finishing and curing, finishing to lines and
grades as per drawings, specifications and
guidelines as per latest MoRTH Clause 601, IRC
Codal Provisions and as per the instructions of
engineer in charge.
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Construction of Panel concrete, plain cement
concrete pavement, thickness as per design, over
a prepared sub base, with 43 grade cement or any
other type as per Clause 1501.2.2 M40 (Grade)
coarse and fine aggregates conforming to IS:383,
maximum size of coarse aggregate not exceeding
25 mm, mixed in a concrete mixer of not less than
0.2 cum capacity and appropriate weigh batcher
using approved mix design, laid in approved
fixed side formwork (steel channel, laying and
fixing of 125 micron thick polythene film,
wedges, steel plates including levelling the
formwork as per drawing), spreading the
10 concrete with shovels, rakes, compacted using 14219.00 Cum 8247.66
needle, screed and plate vibrators and finished in
continuous operation including provision of
contraction and expansion, construction joints,
applying debonding strips, primer, sealant,
dowel bars, near approaches to bridge/culvert
and construction joints, admixture as approved,
curing of concrete slabs for 14 days. Curing
compound (where specified) and water finishing
to lines and grade as per drawing and technical
specification Clause 1501. PCC Grade M-30 Each
Panel (0.50 x 0.50) thickness 100 mm.
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Road marking with hot applied thermoplastic
paints with reflectorising glass beads on bitumin
surface providing and laying a hot applied
thermoplastic compound 2.5 mm thick
includingreflectorising glass beads @ 250gms per
sqm area, thickness of 2.5mm is excluding of
surface applied glass beds as per IRC:35-2015.
The finished surface to be level, uniform and free
from streaks and holes. zebra patta /bump patta
lane/center line/ edge line/cut patta. The white
color marking should provide liminance
coefficinet on cemend road shalll be min
11 mcd/m2/lux and Asphalt road shall be min 100 5412.00 Sqm 367.72
mcd/m2/lux during the service life during the
day time. The marking should meet the
performance criteria for night time reflectivity,
wet reflectivity and skid resistance as mentioned
in the section-15 of IRC 35-2015. Warranty for the
Retro reflectivity should be two years.
Supply and Apply Rumbble Strips Road marking
with hot applied thermoplastic paints with
reflectorising glass beads on bitumin surface
providing and laying a hot applied thermoplastic
compound 8 mm thick including reflectorising
glass beads @ 250gms per sqm area, thickness of
12 8mm is excluding of surface applied glass beds as 115.00 Sqm 2128.07
per IRC:35-2015. The finished surface to be level,
uniform and free from streaks and holes.
Supply and fixing cats eye (Stimsonite) made out
of Acrilo beautile sterine injuction high
compressed molding with reflector made of
MMC (prismatic type) size 12 cms x 6 cms x
cms, provided with bituminous adhesive 100 g.
with each unit for fixing (High Intensity grade)
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Direction sign (Junction board):-Providing and
fixing sing boards made out of 2mm aluminium
sheet; size 244 x 122cms. rectangle as as per the
design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as
per IRC-30-1968, 3.1m long (2 nos) stand post and
frame fabricated from suitable size iron angle of
50 x 50 x 5mm 75x75x6mm as required; painted
14 with best quality epoxy coatings in black and 1.00 No. 14831.70
white bends. the details of symbol or inscription
/ numerals for each board shall be as per the
instruction of engineer in charge. The fixing at
site shall be in 1:2:4 CC block of size 45 x 45 x
60cms. for each leg. including excavation curing
etc. complete under the supervision of engineer
in charge.(A) Engineer Grade(VR)..
Cautionary Warning Sign :-Providing and fixing
sing boards made out of 2mm aluminium sheet;
size 90 x 90 x 90 cms. equilateral triangle as per
design of IRC-67-1977. Pre treated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint ;reflectorised with retro
refiectivesheeting as per latest
M.O.S.T.Specifications; 3.1m long stand postand
frame fabricated from suitable sizeiron angle of
35 x 35 x 3mm, 75 x 75 x 6mm as required;
15 painted with bestquality epoxy coatings in black 166.00 No. 3808.66
andwhite bends. The details of symbol foreach
board shall be as per theinstruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC
blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete
under the supervision of engineer in charge.(A)
Engineer Grade(VR)
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Hazard Marker Sign :-Providing and fixing sing
boards made out of 2mm aluminium sheet; size
90 x 30cms. rectangle as as per the
design/drawing attached (IRC) pretreated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x
x 3mm & 50 x 50 x 5mm painted with best quality
epoxy coatings The fixing at site shall be in 1:2:4
CC block of size 45x45x 60cms. for each leg.
including excavation curing etc. complete under
the supervision of engineer in charge.(A)
Engineer Grade(VR)
Village name/ Bump Ahed sign :-Providing and
fixing sing boards made out of 2mm aluminium
sheet; size 90 x 60cms. rectangle as as per the
design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as
per IRC-30-1968, 3.1m long (2 nos) stand post and
frame fabricated from suitable size iron angle of
50 x 50 x 5mm painted with best quality epoxy
17 coatings in black and white bends. the details of 8.00 No. 5045.36
symbol or inscription / numerals for each board
shall be as per the instruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC block
of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the
supervision of engineer in charge.(A) Engineer
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Informatory Signs :-Providing and fixing sing
boards made out of 2mm aluminium sheet; size
80 x 60cms. rectangle as per the design of IRC-67-
1977 pre treated with phospheting process & acid
teching; coated with one coat of epoxyprimer and
two coats of best qualityepoxy paint; reflectorised
with retro refiective sheeting as per latest
M.O.S.T. Specifications; 3.1m long stand postand
frame fabricated from suitable sizeiron angle of
35 x 35 x 3mm75x75x6mm as required; painted
with best qualityepoxy coatings in black and
18 whitebends. the details of symbol for eachboard 4.00 No. 3856.89
shall details of symbol for eachboard shall be as
per the instruction ofengineer in charge. The
fixing at site shall be in 1:2:4 CC block of size
x45 x 60cms. for each leg. including excavation
curing tec. complete under the supervision of
engineer in charge.(A) Engineer Grade(VR)...
Regulatory/Mandatory signs :Providing and
fixing sing boards made out of 2mm aluminium
sheet; size 60cms. diameter circle as per the
design of IRC-67-1977 pre treated with
phospheting process & acid eteching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x
x 3mm 75x75x6mm as required; painted with best
19 quality epoxy coatings in black and white bends. 12.00 No. 3439.80
the details of symbol for each board shall be as
per the instruction of engineer in charge. The
fixing at site shall be in 1:2:4 CC block of size 45 x
45 x 60cms. for each leg. including excavation
curing etc. complete under the supervision of
engineer in charge.(A) Engineer Grade(VR)...
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Give Way Sign :-Providing and fixing sing boards
made out of 2mm aluminium sheet; size 90 x 90 x
90cms. equiletral tringle (inverted) as as per the
design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro
refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x
20 x 3mm 75x75x6mm as required; painted with best 6.00 No. 3808.66
quality epoxy coatings in black and white bends.
The fixing at site shall be in 1:2:4 CC block of size
45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the
supervision of engineer in charge.(A) Engineer
Chevron sign :-Providing and fixing sign boards
made out of 1.5mm aluminium sheet / 3mm ACP
(Aluminum composite Panel); size 60x50cm
rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching;
coated with one coat of epoxy primer and two
coats of best quality epoxy paint ; reflectorised
with High Intensity Prismatic Grade retro
refiectivesheeting of Type-4 as per ASTM D-4956
and latest M.O.S.T.Specifications; 3.3 mtr long
stand post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame
fabricated from suitable size iron angle
21 of35x35x3mm; painted with bestquality epoxy 126.00 No. 3711.75
coatings in black and white bends. the details of
symbol or inscription / numerals for each board
shall be as per the instruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC
blockof size 45 x 45 x 60 Cms. for each leg
including excavation, curing etc.complete under
the supervision of engineer in charge. A warranty
for 7 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year
outdoor exposure test report from third party test
lab for the product offered shall be submitted by
contractor. (A) Class-B Type-4 Retro Reflective
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Metal Beam Crash Barrier:-Type - A, "W" :
Metal Beam Crash Barrier (Providing and
erecting a "W" metal beam crash barrier
comprising of 3 mm thick corrugated sheet
metal beam rail, 70 cm above road/ground level,
fixed on ISMC series channel vertical post, 150 x
75 x 5 mm spaced 2 m centre to centre, 1.8 m
high, 1.1 m below ground/road level, all steel
22 parts and fitments to be galvanised by hot dip 2740.00 Rmt 3496.62
process, all fittings to conform to IS:1367 and
IS:1364, metal beam rail to be fixed on the vertical
post with a spacer of channel section 150 x 75 x
mm, 330 mm long complete as per clause 810)
Providing and fixing 5th kilometer stone of
precast C.C. 1:2:4 including necessary
23 reinforcement as per I.R.C. type design in C.C. 6.00 No. 1935.15
1:4:8 including painting and lettering etc.
Providing and fixing ordinary kilometer stone of
precast C.C. 1:2:4 including necessary
24 reinforcement as per I.R.C. type design in C.C. 26.00 No. 1290.56
1:4:8 including painting and lettering etc.
Providing and fixing hectometer as per I.R.C.
25 type design including painting lettering etc. 126.00 Nos. 356.50
complete fixing in C.C. 1:5:10
Dismentalling the existing structure including
removing and stacking the dismentalled
26 materials as and where directed (A) R.C.C. work 30.00 Cum 886.05
Excavation for foundation upto 1.5 mt depth
including sorting out of useful material and
27 disposing of the excavated stuff up o 50 mt lead 225.00 Cum 189.30
(1) Loose or soft soil
Providing and filling in foundation with ordinary
cement concrete M100 mix and providing
28 necessary vertical pin headers including form 65.00 Cum 3105.11
work,vibrating, ramming and curing complete.
Item Quantit Rate
Item of work Unit Amount
No. y In figure
Providing and casting in-situ ordinary cement
concrete M150 mix and providing necessary pin
headers including shuttering, scaffolding, laying,
29 vibrating and finishing without V-grooves (A) 128.00 Cum 3678.09
Height from 0.0 to 5 Mt.
Providing and fixing in position ISI mark TMT
(Fe-500D) bar for temperature reinforcement for
30 mass concrete pier/abutment returns including 1.45 Rmt 73217.52
cutting bending and tying as required complete
Supplying and fixing reinforced concrete heavy
duty non pressure pipes with collars of required
length for culverts carrying heavy traffic as per
Indian Railway Standard Specifications including
31 setting the pipes in C.M. 1:2 watering and laying 23.00 Rmt 3879.10
(to level or slope)of class NP4 900mm diameter.
Finishing Wall with weather proof exterior
emulsion paint on wall surface (two coats) to give
an required shape even shade after throughly
32 brushing the surface to remove all dirt, and 129.00 Sqm 114.53
remains of loose powdered materials etc.
Numbering the CD work with approved paint
including all materials for painting etc.
I/We am/are willing to carry out the work at ………………………………………………..% above/below
(percent should be written in figures and words) of the estimated rates mentioned above. Amount of
my/our tender works out as under.
Item Quantit Rate
Item of work Unit Amount
No. y In figure
*Estimated amount *Estimated amount
Put to tender Rs…195287525.22 Put to tender Rs.195287525.22
Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….
Net Rs. …………………….… Total Rs. ………….…
*( please strike out whichever is not applicable)
Note 1:-The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
The labour cess will be deducted as per prevailing rules ie. 1% of the work done.
GST and Income tax TDS will be deducted at a source while making payments of bills.
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate mentioned
in all the tender
To be continued on additional sheet,if found necessary.
Signature of Bidder
Deputy Executive Engineer Division Account Officer
Bharuch (R&B) Sub-Division Bharuch (R&B) Division
Bharuch Bharuch
Executive Engineer
Bharuch ( R&B ) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - 1.pdf
GRs - 2.pdf
E Tender Notice.pdf
SBD.pdf
PQ Book.pdf
Schedule B.pdf
Spe Index.pdf
03 Specification samni kelod 28.10.2026.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .