Construction of Government Girls Hostel (CAP-100) at Khedbrahma.Dist Sabarkantha

Name of work :-

Construction of Government Girls Hostel (CAP-100) at

Khedbrahma.Dist Sabarkantha

DISTRICT :- Sabarkantha

Taluka Name of Work Amount Put to Tender

Construction of Government Girls Hostel

1 Khedbrahma (CAP-100) at Khedbrahma.Dist Sabarkantha

GOVERNMENT OF GUJARAT

ROADS AND BUILDING DEPARTMENT

SACHIVALAY, GANDHINAGAR

Name of work :-

Construction of Government Girls Hostel

(CAP-100) at Khedbrahma.Dist Sabarkantha

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 1147.60 Cum 277.10

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(D) Soft rock not

requiring Blasting

2 Filling available excavated earth (excluding rock) in 1157.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

3 Filling in plinth with sand under floors including watering 98.00 Cum 481.81

ramming, consolidating and dressing complete

4 Filling in foundation and plinth with murrum or selected soil 492.00 Cum 294.39

in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

5 Providing and laying controlled cement concrete M.150 for 275.00 Cum 4237.96

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns and Mass concrete

6 Providing and laying controlled cement concrete M.250 and 355.20 Cum 4500.36

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass concrete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

7 Providing and laying controlled cement concrete M250 and 15.00 Cum 7008.39

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

8 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 34.00 Cum 3374.11

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

9 Providing and laying controlled cement concrete M.250 and 111.00 Cum 6002.43

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

10 Providing and laying controlled cement concrete M.200 and 110.00 Cum 7862.46

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

11 Providing and laying controlled cement concrete M.200 and 24.00 Cum 8001.67

curing complete including the cost of formwork (Vertical

fins and vertical sun breakers.) and reinforcement for

reinforced concrete work in (B) Walls, for all floor level

12 Providing and laying controlled cement concrete M.200 and 250.00 Cum 6136.46

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

13 Providing and laying controlled cement concrete M.200 and 390.60 Cum 6441.40

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

14 Providing and laying controlled cement concrete M.200 and 36.00 Cum 6454.21

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

15 Providing and laying controlled cement concrete M.200 and 11.00 Cum 6989.40

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

16 Providing and laying controlled cement concrete M.200 and 22.00 Cum 6905.88

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

17 Providing TMT Bar FE 500D reinforcement for R.C.C. 225348.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

18 Providing throating or plaster drip and moulding to R.C.C. 218.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

19 Brick work using Common Burnt Clay building bricks 487.00 Cum 4546.91

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

20 Half brick masonry in common burnt clay building bricks 612.00 Sqmt 691.76

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

21 Providing & Fixing Chicken mesh for joint between brick 380.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

22 Providing 15mm thick cement mala plaster in single coat on 4288.00 Sqmt 270.83

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for All

23 Providing 10mm thick cement mala plaster in single coat on 3793.00 Sqmt 241.46

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

for All Floors.

24 20mm thick sand faced cement plaster with Gutka Finish on 2127.00 Sqmt 321.10

walls upto height 15 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) with 5mm grooves, etc. complete.

25 Providing Water Proofing Treatment on Sunk Slab including 183.00 Sqmt 370.67

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average

50mm thick to prepare slope including water proofing

chemical etc. Complete for Sunk Slab for All Floor.

26 Applying two coats of putty & two coats of primer of 8018.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand

papered smooth.

27 Wall painting (three coats) with plastic emulsion paint of 4260.00 Sqmt 125.52

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

28 Ceiling painting (three coats) with plastic emulsion paint of 3805.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

29 Finishing wall with weather proof exterior emulsion paint 2692.00 Sqmt 93.93

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

30 Providing and laying polished Kota stone slab flooring over 1587.00 Sqmt 1019.00

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing

and polishing etc. complete. (A) 25mm thick

31 Providing and laying polished kota stone slab 25mm thick in 105.00 Sqmt 1166.93

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

32 Providing and fixing pre-cast Rubber Dye / steel Dye inter 823.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

33 Providing and fixing Machine cut & Polished kota stone in 50.00 Sqmt 1355.42

7.5 cm width Strip flooring for Ramp even grade over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

34 P & L 24" x 24" Ceramic 10 mm thick tile flooring over 20 246.00 Sqmt 1266.54

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for antiskit

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

35 Providing and laying coloured glazed tiles of the size 300 1196.00 Sqmt 1487.88

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

36 Providing and laying Ceramic tiles 6mm thick in skrting 14.00 Sqmt 1090.32

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

37 Providing and fixing Machine cut, Free edges, Mirror 93.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-cement

: 6-coarse sand) for Trade & Riser including Half Round

moulding front edge of trade jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

38 Providing and fixing Machine cut, Free edges, Polished 438.00 Sqmt 2510.86

Green Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.

39 Providing and laying water prooofing treatment with china 728.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

40 Constructing Sandwich Platform of 18mm thick polished 50.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including

all labour material of approved quality including full

moulded round front edge fixed in wall for partition.

41 Providing and fixing flush door with Single shutters, solid 155.00 Sqmt 4129.89

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, SS Stopper 20cm, SS Aldrop 30cm

both side, anodised alluminium butt hinges with necessary

screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2)

42 Providing and fixing flush door with Double shutters, solid 12.00 Sqmt 5279.27

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery,

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, heavy duty Floor Spring each side,

SS Stopper 20cm, SS Aldrop 30cm both side, anodised

alluminium butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm thick.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

43 Providing and fixing window having extruded aluminum 144.00 Sqmt 1738.21

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip anodiazed aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. With Mosquito net shutter in outer track.

44 Providing and fixing standared extruded of alluminium 16.00 Sqmt 2131.10

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

etc complete for Fix window with Mosquito net.

45 Providing and fixing Louvers in G.I Channel 40x32x5mm 101.00 Sqmt 2215.94

size And 114mm Wide G.I Sheet Having Thickness of

0.55mm & Weight Not Less Than 490 Gm/Mtr. Roll

Formed to create 84mm wide Louver snap fixed on special

shaped G.I Channel,Channel shall be Finished with Powder

Coating of 55 micron For Fix Louvers As Directed By

Engineer In Charge.

46 SIGNAGES ON DOOR :Providing and fixing 304 grade 42.00 Nos. 1262.50

stainless steel 1.5mm thick brushed steel finish plate fixed

on a door using S.S studs and with punched (laser cut)

lettering carried out on S.S plate of required size and text as

directed by engineer etc. complete. Size 30 cm x 15 cm

47 Providing erecting and fixing double coated ISI water tank 20000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

48 Providing, laying and jointing in true line and level 110 822.00 Rmt 876.11

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

49 Providing, laying and jointing in true line and level 160 408.00 Rmt 834.38

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes

and joints and jointed with adhesive solvent cement

including cost of all materials.

50 Providing laying and jointing in true line and level 50mm 86.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 25mm

51 Providing 655.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials. laying and jointing in true line and level 15mm

52 Providing 350.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

53 Providing and fixing concealed center point to wall ceiling 105.00 Rmt 253.82

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 25 mm.

54 Providing and fixing concealed center point to wall ceiling 150.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. 15 mm.

55 Providing and fixing Gun metal check or non-return fullway 17.00 Nos. 420.63

wheel valve.(C) 25mm dia.

56 Providing and fixing ball cock of approved. quality as 2.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

57 Providing and fixing C.P. brass shower rose with 15mm or 40.00 Nos. 282.16

20mm inlet.(A) 100mm dia. Each

58 Providing and fixing wash down water closet (Wall Hung 23.00 Nos. 5172.51

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour

59 Providing and fixing washbasin (ii) Flat Back washbasin 15.00 Nos. 2180.72

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved brand

with connection 15mm dia flexiable pvc pipe etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

60 Providing and fixing Kitchen sink with C.I. or M.S. 2.00 Nos. 2987.87

brackets, painted white including cutting holes in walls (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

including approved sanitary grade material with CP waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of

approved brand with connection 15mm dia flexiable pvc

pipe etc. complete

61 Providing and fixing screw down bib taps of following 85.00 Nos. 186.83

size.(A) Brass screw down bib tap polished bright. (i) 15mm

62 Providing and fixing PVC SWR Nahni trap IS 14735 for 51.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good

63 Providing and fixing S.W. gully trap with C.I. grating brick 40.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

64 Providing and fixing C.P. brass towel rail comlete with C.P. 29.00 Nos. 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

65 Providing and fixing 600mm x 450mm bevelled edge mirror 12.00 Nos. 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

66 Providing and fixing in position PVC cowel went to pipes 12.00 Nos. 75.75

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

67 Constructing brick masonry chamber for underground C.I. 25.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x

mm and 450mm deep for pipe line with one or two inlets.

68 Providing and laying (to level or slopes) and jointing with 20.00 Rmt 531.18

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(B) 150mm dia.

69 Providing and laying (to level or slopes) and jointing with 20.00 Rmt 352.73

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(A) 100mm dia.

70 Applying general insecticide pest control treatment to floors, 819.00 Sqmt 80.62

cupboards etc including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S.

71 Providing and fixing Safety Grills of required pattern for 4765.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at required

spacing as per design and hold fast with coach bolts

including one coat of and two coats of matt finished oil

painting etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

72 Providing and fixing a set of wall mounted 38mm dia. U 1.00 Nos. 2323.00

shaped horizontal stainless steel collapsible grab bar, 38mm

vertical stainless steel fixed grab rail of grade SS 304 from

round pipe supported and 75mm dia 8mm thick SS 304 base

flange on wall including anchor fastners, nuts, accessories as

per detailed drawing etc. complete as directed by architect or

engineer in charge.

73 Providing and fixing of conspectus tape 50mm width on of 160.00 Rmt 1923.04

treads in staircase including cutting pasting etc. As per

harmonised guidelines complete in all respect to the entire

satisfaction of engineer in charge.

74 Providing and fixing 90 cm high Stainless Steel railing made 91.00 Rmt 3760.33

from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16

gauge) as hand rail with S.S.304 grade baluster of 32 mm

dia (16 gauge) as a vertical support fixed in RCC Slab/ steps

of stair at 1.2 mt. c/c including three horizontal S.S. pipes of

16 mm dia (16 gauge) at equal distance fixed by 16 mm dia

(16 gauge) S.S. pipe with baluster including accessories as

per detailed drawing as directwed etc. complete

75 Providing and Fixing 8mm thick poly- Carbonate fiber sheet 14.00 Sqmt 2940.82

using sealant water proofing rubberished adhesive oil

painted 50x50mm hollow channel for framing of shade as

require and fixing frame with surrounding wall etc.

completed as directed.

76 Steel work, welded in built up sections framed work 125.00 Quintal 9108.48

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

77 Painting two coats (excluding priming coat) on external 125.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

78 Brick work using common burnt clay building bricks having 92.60 Cum 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

79 Brick work using Common Burnt Clay building bricks 145.00 Cum 4495.99

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to floor two level in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(Conventional) upto Floor two level

80 Providing and laying controlled cement concrete M.150 and 16.00 Cum 7426.53

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

81 Providing & laying weep hole in Aburtments, and returns by 863.00 Each 86.73

using A.C. pipe of 100mm including laying in proper grede

and jointing the completed as per detailed specification.

82 Providing 15mm thick cement mala plaster in single coat on 721.00 Sqmt 241.38

Rough (Similar)side of single or half brick walls for interior

plastering and finished even and smooth fininshing with a

floating coat of neat cement slurry in (i) Cement mortar 1:3

(1-cement:3-sand), 10x10 mm groves etc. Complete for upto

Floor two level.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

83 Providing and fixing concertina coil fencing with punched 265.00 Rmt. 565.60

tape concertina coil 600 mm dia 10 mt openable length

having 50 no rounds per 6 mt length, upto 3mt height of wall

with existing angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge. placed 2.4mt or

3.00mt apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I.barbed

wire tied to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight

gm/meter at compound wall for ESR M4/intakewell.

84 Drilling of pilot bore hole of size 250/300 mm diameter at 350.00 Rmt 1544.29

above site by mud finish direct rotary rig etc. complete

85 Reaming of 250/300 mm diameter pilot bore hole to size 250.00 Rmt 742.35

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

86 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

87 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

88 Supply of 200 mm diameter V-wire screen pipe of slot size 105.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

89 Supply of M.S. Bore clamps with 3 holes on either side with 1.00 Pair 1753.36

nuts and bolts of standard make and suitable size (g)

mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

90 Supply of Bore Plug having 100 mm height made from M.S. 1.00 Nos. 834.26

plate with 3 holes at equal distance on circumference for

nuts-bolts type, locking arrangement with nut-bolts & lock

nuts of standard make complete. (b) from 5 mm thick M.S.

plate (for top also) (ii) suitable for 200 mm dia. pipe.

91 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

92 Supply of Steel Bent plates suitable to ERW pipe for (b) 200 8.00 Nos. 71.71

mm diameter and 150 x 150 x 6 mm size etc. complete.

93 Supply of Gravel of size selected size up to 4mm to 6 mm, 12.00 Cmt 2295.73

including stacking and filing etc. complete.

94 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

95 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

96 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

97 Providing and erecting PVC corrugated Flexible conduit 225.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (3) 32 mm diameter

98 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B) Above

60 mtr and up to 120 mtr

99 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON-OFF isolator (AC - 3/23 duty) main fuses, single

phasing preventer, indicating lamps for R-Y-B phases,

overload relay, automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start-stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L&T, Seimens or BCH make only (a)

DOL upto 7.50 H.P.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

100 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 250.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

101 Providing laying and jointing in true line and level 50mm 150.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

102 Providing and fixing butterfly valve of IS approved brand 2.00 Nos. 1595.80

103 Excavation for foundation for depth from 1.5 m to 3.0 m 23.00 Cum 300.80

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (D)

Soft rock not requiring Blasting

104 Providing 10mm thick cement mala plaster in single coat on 19.00 Sqmt 215.30

brick/concrete walls for interior plastering and finished even

and smooth fininshing with a floating coat of neat cement

slurry in (i)Cement mortar 1:3 (1-cement:3-sand). Complete

upto floor two level.

105 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 7.00 Nos 958.17

size having weight not less than 35Kg.

106 Clearing and grubbing road land including uprooting rank 1.10 Hectare 28455.10

vegetation grass bushes, shrubs, sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials (C) By mechanical means in area

of light jungle

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

107 Earthwork in cuting in all sorts of soil and soft murrum 1097.00 Cum 134.20

including conveying and spreading the stuff, embankment as

and where directed within 200meters from the end of the

cutting with all required lead and lift.

108 Earthwork in cutting including preparing the slope and 2194.00 Cum 260.57

camber and stacking or utilising the cutting stuff in bank as

directed upto 200 Meters from the end of cutting with all

lead and lift.(i) Hard murrum.

109 Earthwork in cutting including preparing the slope and 8773.00 Cum 316.60

camber andstacking or utilising the cutting stuff in bank as

directed upto 200 Meters from the end of cutting with all

lead and lift.(ii) Soft rock not requiring blasting.

110 Earthwork in cutting including preparing the slope and 9870.00 Cum 670.97

camber andstacking or utilising the cutting stuff in bank as

directed upto 200 Meters from the end of cutting with all

lead and lift.(iii) Hard rock.

111 Conveying and utilising the stuff in bank from end of cutting 6909.00 Cum 129.28

with all required lead and lift.(C) Above 400 Meters upto

112 Earthwork for embankment including breaking clods, 1262.00 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

113 Rolling and consolidation of soling including filling in 4255.00 Sqmt. 22.75

depression which occur during the process, with power roler

8 tonne to 12 tonne..

114 Providing uncoursed rubble stone masonry in Cement 55.00 Cum 2294.12

Mortar 1:5 for flooring including curring pointing in Cement

Mortar 1:3 on exposed faces complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

115 Box cutting the road surface to proper slope and camber for 397.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

116 Construction of B.I.T.C. granular sub base by providing 159.00 Cum 1620.86

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

117 Providing, laying, spreading and compacting stone 116.00 Cum 2122.90

aggregates of specific sizes to water bound macadam (Grade-

II) (B.T. Metal of size 45 to 63 mm) specification including

spreading in uniform thickness, hand packing, rolling with

wheeled steel/ vibratory roller in stages to proper grade and

camber, applying and brooming requisite type of screening/

binding Materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

118 Compaction and finishing of cement concrete road by trimix 684.00 Sqmt. 72.72

process providing extra labour charges for the trimix vaccum

dewatering service process on cement concrete road surface

by using vaccum dewatering pump floater surface vibrator

including making rough finish to surface as per in including

levelling the complete.

119 Supplying and fixing reinforced concrete heavy duty non- 30.00 Rmt. 660.00

pressure pipes with collars for culverts carrying heavy traffic

as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

120 Construction of Cattle trap made from ISMC 100 border and 6.00 Sqmt. 6146.86

G.I. pipe 50 mm dia. Heavy duty at 12cm spacing by

welding and for supports 2 nos. I.S.M.C. 100x75x6 section

fixing in prepared chamber as per drawing.

121 Constructing Brick masonry road gully chamber 500mm x 12.00 Nos. 2017.20

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

122 Supplying of yellow or Goradu soil with all lead and lift 864.00 Cum 505.00

including spreading watering dressing and rolling with hand

roller etc complete selected soil

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

123 Supplying of well rotted FYM manure with all lead and lift 44.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

124 Scarifying the surface of soil including spreading of DAP 438.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground dressing

125 Supplying and planting Dibbling semi carpet lawn at 438.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

126 Bowling and developing flowering plants grown in nursery 50.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Bottom Palm

127 Bowling and developing flowering plants grown in nursery 50.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

128 Bowling and developing flowering plants grown in nursery 35.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

129 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

130 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

131 Bowling and developing flowering plants grown in nursery 50.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

132 Bowling and developing flowering plants grown in nursery 45.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

133 Bowling and developing flowering plants grown in nursery 40.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

134 Bowling and developing flowering plants grown in nursery 45.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

135 Bowling and developing flowering plants grown in nursery 500.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

136 Bowling and developing flowering plants grown in nursery 30.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

137 Bowling and developing flowering plants grown in nursery 29.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

138 Bowling and developing flowering plants grown in nursery 500.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

139 Bowling and developing flowering plants grown in nursery 500.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

140 Bowling and developing flowering plants grown in nursery 50.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

141 Bowling and developing flowering plants grown in nursery 100.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

142 Labour charges for planting various plantsafler proper anti- 2124.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

143 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

144 Providing laying and jointing in true line and level 40mm 60.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

145 Providing and fixing brass screw down stop tap.(A) 15mm 10.00 Nos. 205.83

146 Rubber Hose Pipe 15 mm dia of approved brand and make 100.00 Rmt 90.90

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

147 Providing and fixing G.I. Nipple as directed 20.00 Nos. 50.50

148 Excavation for foundation upto 1.5 m depth including 25.00 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

149 Providing & Laying Rain Water Junction Chamber of Clear 15.00 Nos. 6526.62

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

150 Providing & Laying Filter chamber of brickwork 0.23 thick 15.00 Nos. 23208.79

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

151 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 35169.21

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick in

C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m with

15mm thick C.M. 1:4 plaster, filling the pit with B.T. metal

40mm in 0.60 mt. depth with 25-40mm kaptchi, 0.30 mt.

depth and 2mt. depth with coarse sand in layers including

makng P.V.C. line for water inlet etc. as directed with

250mm dia bore 15mt. depth amd 150mm dia PVC pipe of

10 Kg.f/cm2 casing wih gravel packing or as directed.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

152 A Pump Room. Supply & fixing Diesel engine driven min. 1.00 Nos. 555500.00

pump of S5 mt. head and 137 M3/ Hr. capacity with

RPM diesel engine with battery charger. Base plate, AVM

pad etc. complete as directed including necessary concrete

platform as directed. (Make:-L)

153 Fire Pumps & Accessories, Yard Hydrant, Internal Hydrant, 1.00 Nos. 153924.00

Hose Reel & Sprinkler System Supply, Installation, Testing

& Commisioning of Main Fire Pump Of Capacity 20 H.P.

with 55 mtr. Head, Pump

154 Supply, Installation, Testing & Commisioning of control 1.00 Nos. 90900.00

Panel suitable for automatic operation of fire fighting pumps

consisting (a) Necessary cabling, wiring, earthing from panel

to individual equipment shall be included in the quoted

price. (b) Facility for more selection i.e. auto or manual. (c)

Protection failure and control cabling. (d) Interlocking of

pressure switch with pumps.

155 Supply, Installation, Testing & Commisioning of 150mm 1.00 Nos. 3535.00

dia. Pressure Gauge of range 0 - 15 kg/cm3 confirming to as

per specification complete as required.

156 Supply, Installation, Testing & Commisioning of Pressure 1.00 Nos. 4545.00

Switches for automation of fire pumps, Pressure switches

shall be double pole, single throw type suitable for 3 phase

supply with diaphragm. Alluminium Enclosure with IP

protection as required.

157 Supply, Installation, Testing & Commisioning of the 40.00 meter 2390.67

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.a) 150 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

158 Supply, Installation, Testing & Commisioning of the 45.00 meter 1711.95

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. b) 100 mm dia.

159 Supply, Installation, Testing & Commisioning of the 10.00 meter 1277.65

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.c) 80 mm dia.

160 Supply, Installation, Testing & Commisioning of the 50.00 meter 1100.90

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required. d) 65 mm dia.

161 Supply, Installation, Testing & Commisioning of the 45.00 meter 989.80

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.e) 50 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

162 Supply, Installation, Testing & Commisioning of the 40.00 meter 858.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.f) 32 mm dia.

163 Supply, Installation, Testing & Commisioning of the 150.00 meter 555.50

following sizes of flanges jointed / screwed / welded, M.S.

Pipes of Class C ISI marked including accessories such as

MS bracket, U clamps with Anchor Fasteners, tees / elbows

/ reducers / couplings / unions / bends / flanges etc. and

laying on the surface including painting with two coats of

anticorrosive primer and two coats of approved red enamel

paint after laying and testing after installation etc. as per

specifications complete as required.g) 25 mm dia.

164 Supply, Installation, Testing & Commisioning of C.I. 1.00 Nos. 9738.42

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required.a) 150 mm dia.

165 Supply, Installation, Testing & Commisioning of C.I. 2.00 Nos. 8932.44

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required.b) 100 mm dia.

166 Supply, Installation, Testing & Commisioning of C.I. 2.00 Nos. 5555.00

Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets

complete as required.d) 50 mm dia.

167 Supply, Installation, Testing & Commisioning of Cast iron 1.00 Nos. 9090.00

Dual plate Check valve (PN 1.6)a) 150 mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

168 Supply, Installation, Testing & Commisioning of Cast iron 2.00 Nos. 7564.90

Dual plate Check valve (PN 1.6)b) 100 mm dia.

169 Supply, Installation, Testing & Commisioning S.S. Single 3.00 Nos. 5656.00

Headed Fire Hydrant Valve with 80mm N.B. Flanged inlet,

63 mm dia. Female instantaneous outlet type S.S. coupling,

blank cap, chain, twist release type lug & all accessories

Confirming to IS:5290. Including fixing with supports,

flanged tapping from wet riser, orifice plate.

170 Supply, Installation, Testing & Commisioning of Weather 2.00 Nos. 4595.50

proof standard M.S. Fire Hose Cabinet wall mounting type

(450mm x 450mm x 250mm deep) having single or double

opening with necessary locking arrangement by allan key

suitable for housing 1 nos. hose pipe, 1 nos. Branch pipe &

nozzle spanner.

171 Supply, Installation, Testing & Commisioning non 2.00 Nos. 5641.86

percolating rubber reinforced lined Fire Hose pipe (as per

IS:636) of 63mm dia and 15 mtr. Long. The hose shall be

rated for burst pressure pf 35.7kg/sqcm. Hose shall be

complete with ISI marked SS male & female coupling

(IS:903) bound & riveted to hose pipe with copper rivets &

1.5mm copper wire.

172 Supply, Installation, Testing & Commisioning of 63mm dia. 2.00 Nos. 5641.86

Instantaneous pattern SS 304, short branch pipe, 20mm dia

nozzle confirming to IS

173 Supply, Installation, Testing & Commisioning of First Aid 2.00 Nos. 6565.00

Hose Reel equipment conforming to 15:884 comprising of

hose reel drum, 8 mm shut off noz:z.le, Ru bber hose of

mm dia x 30 mtr. long, painting, swinging type fixing

bracket, anchor fastener, bolts & nuts etc.

174 Supply, Installation, Testing & Commisioning of SS Ball 2.00 Nos. 858.50

Valve. A) 25mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

175 Supply, Installation, Testing & Commisioning of Cast Iron 2 1.00 Nos. 8585.00

Way Fire Brigade Inlet as per 1S: 904 having 63 mm dia

in/et with blank cap and chain with necessary fit ti ngs,

flanges, nut bolts etc. complete as required. (For Hydrant

176 Supply, Installation, Testing & Commisioning of Gun Metal 1.00 Nos. 959.50

Air Release Valve with necessary fittings. Size: 25mm (For

177 Supply, Installation, Testing & Commisioning of Quartzoid 30.00 Nos. 454.50

Bulb type Sprinkler Heads. A) Pendent Sprinkler 57°C

178 Fire Alarm System Alarm panel Microprocessor based 8 1.00 Nos. 16665.00

179 Manual Call Point 3.00 Nos. 454.50

180 2 core x 1.5 sqmm wire with pvc conduct and required 250.00 Rmt. 166.65

181 Smoke Detector 30.00 Nos. 1565.50

182 II) Fire Extinguisher and Exit Signages Supply, installlation, 10.00 Nos. 6447.84

testing and commissioning of Carbon Dioxide (CO2) type

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

marked / TAC approved fitted with required accessories

including wall suspension brakets.

183 Supply, Installation, Testing & Commisioning of ABC type 10.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

184 Signage Boards 25.00 Nos. 252.50

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

185 Providing and laying controlled cement concrete M.200 and 1.00 Cum 6087.11

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams upto floor two level.

186 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 5.00 Sqmt 1311.18

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade

187 Providing and fixing window having extruded aluminum 4.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

188 Excavation for foundation upto 1.5 m depth including 60.00 Cum 532.91

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(D)

Soft rock not requiring Blasting

189 Excavation for foundation for depth from 1.5 m to 3.0 m 20.00 Cum 555.49

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead. (D) Soft rock not requiring Blasting

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

190 Providing and laying cement concrete 1:5:10 (1- Cement : 5- 4.00 Cum 2566.77

fine sand : 10- graded brick bat aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

191 Half brick masonry in common brunt clay building bricks 22.00 Sqmt. 618.79

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in

foundation and plinth (B) Conventional

192 Providing and laying cement concrete flooring 1:2:4 (1- 30.00 Sqmt. 352.01

cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating

coat of neat cement. (B) 50mm thick.

193 Providing and Laying ordinary cement concrete 1:2:4 (1- 5.00 Cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. thickness

194 Providing and laying (to level or slopes) and jointing with 15.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

195 Providing and Constructing sock pit of 2.46 mt. dia outside 3.00 Nos 40244.46

and 4 mt depth with honey combed masonary 6.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 1.8mt. Long 75mm dia

& C.I. cover and cowel vent etc. comp

196 Demarkation of road alingment including marking out road 0.10 Km 2706.50

line by providing and fixing wooden pegs or steel rod of

required size at every 25 M to 50 M. including excavating

trenches ion both sodes of 0.30 m. x 0.30M. including

supplying of labours and all materials for every work etc.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

197 Providing flood gauge marks on substructure as per design 4.41 Rmt. 165.69

including painting complete.

198 Providing and laying - Fitter Media 600mm thick directed at 393.00 Sq.m. 1238.93

the back of abutments,returns and wing walls as per detailed

specifications.

199 Providing and laying boulders apron on river bed for 166.40 Cum. 1083.81

protection against scour with stone boulders weighing not

less than 40 kg each complete as per drawing and Technical

200 Providing and laying Pitching on slopes laid over prepared 444.90 Cu.m. 1051.41

filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical

201 Providing & laying filter material underneath pitching in 46.50 cum 877.69

slope complete as per drawing and technical specification

202 Excavation for foundation in sand, gravel, clay soft soils and 453.00 cum 511.45

murrum etc. including shoring, strutting dewatering as

necessary and disposing of the excavated stuff as

directed.(A) Depth upto 3.0 M. and lead upto 100m for

203 Excavation in large boulders and soft rock by welding 647.70 Cu.m. 717.23

including shoring, strutting and dewatering as necessary and

disposing of the excavated stuff as directed.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

204 Providing and filling in foundation with ordinary Cement 37.70 Cu.m. 3615.61

concrete M-150 mix and providing necessary vertical pin

headers including formwork, vibrating, ramming and curing

205 Providing and Casting in situ controlled Cement Concrete M- 35.60 Cu.m. 4659.10

250 for R.C.C. Raft and cutt-off walls including necessary

shuttering laying, vibrating, ramming and curing complete.

206 Providing and Casting in situ controlled Cement Concrete M- 150.40 Cu.m. 4659.10

30 for R.C.C. Raft and cutt-off walls including necessary

shuttering laying, vibrating, ramming and curing complete.

207 Gabian Structure for Retaining Earth (Providing and 190.00 Cu.m. 1560.45

construction of a gabain structure for retaining earth with

segments of wire crates of size 7 m x 3 m x 0.6 m each

divided into 1.5 m compartments by cross netting, made

from 4 mm galvanised steel wire @ 32 kg per 10 sqm

having minimum tensile strength of 300 Mpa conforming to

IS:280 and galvanizing coating conforming to IS:4826,

woven into mesh with double twist, mesh size not

exceeding 100 x 100 mm, filled with boulders with least

dimension of 200 mm, all loose ends to be tied with 4 mm

galvanised steel wire)

208 Laying of a geotextile filter between pitching and 120.00 Sq.m 753.46

embankment slopes on which pitching is laid to prevent

escape of the embankment material through the voids of the

stone pitching/cement concrete blocks as well as to allow

free movement of water without creating any uplift head on

209 Providing and casting in situ controlled cement concrete M- 214.70 Cu.m. 5266.33

250 for R.C.C. return as per drawings including centering

shuttering, scaffolding where necessary, laying vibrating,

curing and finishing complete.(A) Height from 0.0 to 5.0 M.

(1) Piers (2) Abutment (3) RCC return

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

210 Providing and casting in situ controlled cement concrete M- 12.00 Cu.m. 5433.93

250 for R.C.C. return as per drawings including centering

shuttering, scaffolding where necessary, laying vibrating,

curing and finishing complete.(A) Height from 5.0 to

M. (1) Piers (2) Abutment (3) RCC return

211 Providing sand filling behind abutment and between return 683.40 Cum 479.44

wall in layers as directed

212 Providing and casting in situ controlled cement concrete M- 34.30 Cum. 5397.06

250 for R.C.C. solid slab including centering, scaffolding,

curing and finishing complete.

213 Drainage spouts complete as per drawing and technical 10.00 No. 536.03

specifications Clause

214 Providing and fixing 'W' type safety barrier using M.S. iron 80.00 Rmt 3388.00

channel 150mm x 75m x 5mm size erected at 2.0 Mt. center

to center and providing 'W' shaped galvanised steel sheet

guard rail 3mm thick for crash barrier in single row as per

detailed drawing with fabrication and installation charges

including providing foundation block of size 0.60 x 0.60 x

0.75 Mt. in C.C. 1:2:4 and oil painting two coats with one

coat of red oxide etc complete.

215 Earthwork for embankment including breaking clods, 127.20 Cum 211.82

dressing with all lead and lift (excluding watering and

consolidation)(E) From Borrow area within 3.0 Km. lead

(more than 10 ton)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

216 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 399.00 Pts 485.81

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

217 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 157.00 Pts 674.68

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed..(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat-

III (Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

219 Point wiring for Individual Plug with & earth wire of 1.5 88.00 Pts 510.05

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

completeCat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

220 Point wiring for on board Looped Plug with 6A Modular 158.00 Pts 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories.Cat-III

(Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

221 Providing following type of Modular Type Accessories 3.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two Pin/RJ-11

Telephone Socket[A] For One Gang Cat.III (Make:-

Honeywell, L&T, Havells, Indoasian, Legrand)

222 Providing following type of Modular Type Accessories 3.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

223 Providing following type of Modular Type Accessories 158.00 Nos. 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank Plate

Single Cat.III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

224 Providing following type of Modular Type Accessories 33.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (8) Computer RJ-

45 socket Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

225 Providing following type of Modular Type Accessories 61.00 Nos. 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat-III (Make:- Honeywell, L&T, Havells,

Indoasian, Legrand)

226 Providing following type of Modular Type Accessories 61.00 Nos. 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat-III (Make:- Honeywell, L&T,

Havells, Indoasian, Legrand)

227 Providing following type of Modular Type Accessories 16.00 Nos. 604.99

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (21) Foot Light as

per colour requirement with concealed box, modular

accessories, acrylic glass cover with suitable LED watt with

all accessories as per following module (c) Six modules

Cat-III (Make:- Honeywell, L&T, Havells, Indoasian,

228 Providing and erecting ISI mark Medium class RIGID PVC 0.00 0.00 0.00

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

229 Providing and erecting ISI mark Medium class RIGID PVC 1260.00 Mtrs. 33.33

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (b) 25 mm

230 Providing and erecting ISI mark Medium class RIGID PVC 160.00 Mtrs. 54.54

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (c) 32 mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

231 Providing & erecting PVC Corrugated Flexible Conduit with 240.00 Mtrs. 21.21

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes.(2) 25 mm

232 Providing & erecting PVC Corrugated Flexible Conduit with 120.00 Mtrs. 27.27

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm

233 Supplying and laying UPVC cable trunking system 25.00 Mtrs. 428.24

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes (2) 100 mm x 50 mm trunking

234 Providing and erecting Mains with 1.1 KV grade FRLS PVC 5166.00 Mtrs. 82.82

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class Rigid

PVC pipe and accessories (b) 2 wire 2.5 sq. mm (Make: -RR

Kabel, Havells, Avocab, KEI,Johnson)

235 Providing and erecting Mains with 1.1 KV grade FRLS PVC 2256.00 Mtrs. 112.11

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

236 Providing and erecting Mains with 1.1 KV grade FRLS PVC 630.00 Mtrs. 425.21

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm ) (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

238 providing and erecting Mains with ISI marked, 1.5KV grade 150.00 Mtrs. 91.91

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

239 providing and erecting Mains with ISI marked, 1.5KV grade 30.00 Mtrs. 300.98

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (i) One wire 35.00 sq. mm

240 Supplying and erecting Flexible PVC insulated multi strand 278.00 Mtrs. 22.22

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. (c) 1.00 Sq.mm

core round/ flat PVC sheathed

241 Supplying and erecting Flexible PVC insulated multi strand 180.00 Mtrs. 46.46

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.e) 1.50 Sq.mm

core round PVC sheathed

242 Providing & Erecting approved make following size of TV 135.00 Mtrs. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC

insulation. e).RG-11

243 Supplying & erecting approved make Telephone Cable 75.00 Mtrs. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured

244 Supplying & erecting approved make LAN cable of 1056.00 Mtrs. 47.47

following size in existing pipe as per direction [C] CAT -

245 Providing & erecting main Distribution (MDF) indoor type, 4.00 Nos. 994.85

back mounted frame as per DoT standard approved with

krone strips (a) Suitable for 10 pair

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

246 Supplying & erecting M.S. Box having 16 Gauge painted 14.00 Nos. 88.88

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size. (c) 200 mm x

247 Providing & erecting Switch board for Computer or electric 33.00 Nos. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

single mounting base frame covered with textured/metallic

/white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-

III (Make:- Honeywell, L&T, Havells, Indoasian, Legrand)

248 Decorative call bell Ting-tong box type 250 volts complete 1.00 Nos. 71.71

249 Supplying and erecting LED indoor fittings with LEDs of 313.00 Nos. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral/ non-integral driver . (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

250 Supplying and erecting led lamps with following wattage 45.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (i) 5 to 8 watts Cat-III

(Make:- Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

251 Supplying and erecting LED street light / Flood light fittings 20.00 Nos. 4997.48

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(ii) above 48 to 60 Watts Cat-III (Make:- Wipro,

LT,Philiphs,Havells,Jaquar)

252 Supplying and erecting LED street light / Flood light fittings 10.00 Nos. 8453.70

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection.(v) above 120 to 160 watts Cat-III (Make:-

Wipro, LT,Philiphs,Havells,Jaquar)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

253 Supplying and erecting LED street light / Flood light fittings 2.00 Nos. 4819.72

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting

driver and accessories wired upto terminal block.IP 65 (ii)32-

40W Cat-III (Make:- Wipro, LT,Philiphs,Havells,Jaquar)

254 Providing and erecting Approved make Four pole moulded 25.00 Nos. 6173.12

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

with Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

255 Providing and erecting Approved make Four pole moulded 5.00 Nos. 8055.76

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

256 Providing and erecting Approved make Four pole moulded 2.00 Nos. 20946.39

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A.

with variable thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

257 Providing and erecting Approved make Four pole moulded 1.00 Nos. 25228.79

case circuit breaker having breaking capacity ICU of 50 KA

and above at 415 V having Normal current rating 400A.

with variable Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

258 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 22255.35

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(F)400A (Make:- Indoasian, L&T (LK), ABB, Schneider)

259 Providing and erecting Approved make Earth fault Relay 1.00 Nos. 5415.62

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected

in existing M.S.housing. (3) 250 A -400 A , CT Ratio 1/400

260 Supplying and erecting triple pole & neutral 440V / 500V 12.00 Rn.Mtrs 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

261 Supplying and erecting triple pole & neutral 440V / 500V 9.00 Rn.Mtrs 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

262 Supplying and erecting triple pole & neutral 440V / 500V 2.00 Rn.Mtrs 7319.47

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. capacity

263 providing and erecting Miniature circuit breaker single pole 32.00 Nos. 270.68

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III (Make:- Indoasian, L&T (LK), ABB,

264 Providing and erecting Miniature circuit breaker single pole 168.00 Nos. 112.11

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark Cat-III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

265 Providing & erecting 240 V MCB double pole switch for 6.00 Nos. 295.93

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

266 Providing & erecting 415 V MCB Four Pole for Motor & 16.00 Nos. 737.30

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (B.) for 63 Amp. Cat-III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

267 Providing and erecting Sheet Steel powder coated MCB 14.00 Nos. 2913.85

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (ii)6

way (Make:- Indoasian, L&T (LK), ABB, Schneider)

268 Providing and erecting Approved make RCCBs conforming 42.00 Nos. 2235.13

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed (iI) 40 Amps.DP Cat. III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

269 Providing and erecting metallic vitrified danger notice board 5.00 Nos. 69.69

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

270 Providing and erecting Annealed bare Copper wire 8 to 16 30.00 Kgs. 794.87

271 Providing and erecting Pipe type earthing having 150 20.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

272 For using salt and charcoal / coke as required for pipe type 20.00 Nos. 171.70

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

273 Supplying & erecting earth pit of minimum bore dia.150mm 5.00 Nos. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

274 Providing & erecting weather proof, dust & vermin proof, 9.00 Sq.Mtrs. 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet

for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size. (B) The standard companies switch gear

shall be used and only manufacturers at CPRI approved

factory (i) with 350mm depth

275 Providing , erecting , fabricating the M.S. structure as per 140.00 Kgs. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

with cutting, welding, grinding & finishing duly painted

with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

276 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 190.00 Mtrs. 220.18

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

277 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 120.00 Mtrs. 490.86

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (E) 3 1/2 core 95 Sq. mm (

50 Sq. mm 1/2 core) (Make: -RR Kabel, Havells, Avocab,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

278 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 360.00 Mtrs. 904.96

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (H) 3 1/2 core 185 Sq. mm

( 95 Sq. mm 1/2 core) (Make: -RR Kabel, Havells,

Avocab, KEI,Johnson)

279 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 230.00 Mtrs. 117.16

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (A) 4 core 4 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

280 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 550.00 Mtrs. 140.39

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (C) 4 core 10 Sq.

mm (Make: -RR Kabel, Havells, Avocab, KEI,Johnson)

281 Making trench in soft soil of suitable width of 90 cm deep 455.00 Mtrs. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

282 Making trench in Hard Murrum / Tar Road of suitable width 227.50 Mtrs. 74.74

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

283 Making trench in Hard Murrum / Tar Road of suitable width 91.00 Mtrs. 357.54

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

284 Providing & laying. R.C.C. Hume pipe for cable to be laid 60.00 Mtrs. 263.61

90 cm. below ground across the road crossing or on floor

with necessary material in an approved manner and making

the ground as per original. (E)150 mm dia

285 Providing & laying approved make Double walled 824.50 Mtrs. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer Dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

286 Providing & laying approved make Double walled 306.00 Mtrs. 137.36

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (D)

120 mm Outer Dia

287 Providing & laying approved make ISI marked Rigid PVC 50.00 Mtrs. 236.34

pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The pipes

as following size of dia & weight per 6 mtr. (F) 110 mm

inner Dia. (11.63 Kg/6 RMT)

288 Providing and, fixing heavy duty flange type brass cable 20.00 Nos. 33.33

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

289 Providing and, fixing heavy duty flange type brass cable 44.00 Nos. 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (C) 2 to 4 core 10 Sq. mm

290 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B) 3 & 1/2

core 35/50 Sq. mm

291 Providing and, fixing heavy duty flange type brass double 8.00 Nos. 131.30

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables. (D) 3 & 1/2

292 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 238.36

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(G) 3 & 1/2

core 185 Sq. mm

293 Solder less crimping type Aluminium lugs conforming to IS 80.00 Nos. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (A)

294 Solder less crimping type Aluminium lugs conforming to IS 176.00 Nos. 13.13

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (B)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

295 Solder less crimping type Aluminium lugs conforming to IS 32.00 Nos. 20.20

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (D)

296 Solder less crimping type Aluminium lugs conforming to IS 32.00 Nos. 40.40

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (F)

297 Solder less crimping type Aluminium lugs conforming to IS 8.00 Nos. 80.80

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. ( I )

298 Providing and erecting Approved make Ceiling fan with 157.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton, Havells, Orient)

299 Supplying and erecting 19 / 20 mm. nominal bore Medium 157.00 Mtrs. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

300 Supplying & erecting fan hook box of 10 mm M.S. round 157.00 Nos. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

301 Supplying & erecting single phase approved make industrial 40.00 Nos. 2054.34

exhaust fan suitable for medium duty ring mounted low

noise operation suitable for medium duty having following

dia size and maximum speed in RPM [A] 305 mm dia

RPM Cat.II (Make:- Crompton, Havells, Orient)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

302 Supplying and erecting approved make Octagonal pole made 20.00 Nos. 8192.11

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 59 kg

303 Supplying & erecting approved make SMC press moulded 12.00 Nos. 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (b)

250mm x 200mm x 100mm [deep]

304 Providing street light pole bracket comprising main B Class 20.00 Nos. 561.56

MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm / 80mm. / require size pole top

having sufficient fastners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and nipple

with check nut complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint.

paint with following nos of arms. [A] Single Arm bracket

305 Supplying & erecting approved make Digital time switch 2.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

306 Supplying & erecting power contactor ,AC3 duty for time 2.00 Nos. 2782.55

switch complete erected as per direction Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider) [D] 4 pole 440V

307 Providing & Erecting full SS Body (SS 304) Split type water 5.00 Nos. 61115.10

cooler having storage capacity 160 to 175 Ltr.(Tank SS 304)

& Cooling capacity 150 ltr. Per hour @ an ambient temp of

350 C.The outlet temp. of the water should drop by 150C

within a hour,The water cooler should be comprising of

hermetically sealed Reciprocating compressor with R134A,

fan motor, Copper Condensing unit with company fabricated

Outdoor Unit water tank surrounded by evaporating coil,

thermostats, relay etc.complete with necessary copper tube

& Insulation, M.S Chanel Stand with Painting for water tank

& M.S. Powder Coated Stand for Outdoor unit with

Installation. With DPELCB and 4 Way DB Box with

accessory Three core Cord for connection.(Make:- Blue

Star,Usha,Voltas)

308 Supplying and erecting water filter cum purifier with ultra 5.00 Nos. 5424.71

violate technology. (Aquaguard / waterdoc model or

equivalent symphony/ crystal/videocon model)

309 Supplying & erecting 5 stage single reverse osmosis water 5.00 Nos. 29187.99

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed[C] 50 Ltr / Hr with 150 psi 2 nos

310 Supplying and erecting horizontal / vertical mounting type 20.00 Nos. 11455.42

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats 300C

to 850C, indicating lamp, safety valve, fusible plug,

etc.complete erected with coach bolts, nuts. washers &

cementation (C)25 Ltr. with 2 KW. heating element

Premium Category

311 Supplying and erecting chromium plated heavy duty brass 20.00 Nos. 181.80

valve for inlet pipe of water heater 15 mm dia.)

312 Supplying and erecting 15mm brass non-return valve for 20.00 Nos. 232.30

inlet pipe of storage water heater.

313 Supplying and erecting dead pressure releasing valve for 20.00 Nos. 385.82

storage type water heater with necessary materials.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

314 Providing & erecting fibre reinforced PVC flexible pipe with 80.00 Rmts. 181.80

brass locking nuts & washers & clips at both ends complete

erected without leakage

315 Supplying, installing, testing & commissioning of SOLAR 5.00 Nos. 189956.76

WATER heating system as per prevailing IS code

comprising of Solar flat locket collector, stainless steel hot

water storage isolated tank with S.S. heat exchanger,

absorber made of copper sheet & copper tube of following

capacity in liter / day (LPD) with "B" size aluminium box

collector with appropriate capacity electrical backup

arrangement (Excluding inlet & outlet pipe lines) (E)

Capacity of 1000 LPD

316 Supplying & erecting resin bonded flap rock wool / glass 192.00 Mtrs. 767.60

wool with conductivity valve 1.67 sq.mm per watt & to with

stand the temp. to 100 degree centigrade C thickness 50mm

with G I pipe of following size dia "B" class as per IS:1239.

The plastic sheet to be used as covering of glass wool. Al.

cladding besides other materials like chicken mesh, 26 G Al.

Sheet shall be used for cladding the insulation pipe.(E) for

317 Supplying and erecting approved make panel mounting type 5.00 Nos. 1275.63

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

318 Supplying and erecting approved make panel mounting type 5.00 Nos. 1558.43

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

319 Providing & erecting L.T. Current Transformer with bar 15.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

320 Supplying and erecting approved make suitable panel 15.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

321 Providing & erecting open well horizontal mono block 2.00 Nos. 15707.52

pump set with cast iron body, complete for three phase

submersible motor having[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II (Make:- Crompton, Lubi )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

322 Supplying & erecting approved make motor control 2.00 Nos. 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable

size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make only.(A)

DOL up to 5.0 H.P.

323 Providing and erecting ISI marked PVC insulated PVC 90.00 Mtrs. 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

324 Providing Water proof straight Joint in PVC insulated flat 2.00 Nos. 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

325 Supplying of following size of HEAVY UPVC column pipe 30.00 Rmts. 359.56

with coupler and wire lock [B] 50 mm dia

326 Supplying, & erecting C.I. swing, check type non-return 2.00 Nos. 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

327 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe as

directed by Engineer - in - charge with necessary plumbing

as desired.[D] 50 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

328 Supplying, Erecting, Testing & Commissioning the 1.00 Nos 1575617.17

passenger / stretcher lift having following main features:[1]

GEAR LESS LIFT DRIVE (MRL) comprising of High

Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency

shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop

system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety

controls. [3] Car with M S platform with bracings of

adequate size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side panels

of Stainless steel of sheet of grade 304 duty. Car ceiling will

be S.S. finishes with aesthetic appearance with LED ceiling

lights. Car flooring shall be of s/s 304 chaker plate design

sugeested of engineer in charge. of engineer in charge. Car

doors shall be of stainless steel grade 304, hairline finish

with centre opening / telescopic automatic doors. Car panel

will also be S.S. 304 finished with emergency stop device,

mechanical door safety device, facility of auto/ attended

mode. All car panel buttons and all floor switches must be

with brail language as per lift act. [4] All landing doors must

be fire rated for 2 hour shall be fully automatic centre

opening/ telescopic opening made of hairline finish steel

grade of 304 with key holes and infrared curtains with

Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time

Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open till

excess load is removed. [10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.

[12] Voice annunciator with suitable music shall be

provided in lift car.

with centre opening / telescopic automatic doors. Car panel

will also be S.S. 304 finished with emergency stop device, Estimated

mechanical door safety device, facility of auto/ attended Rates Total Amount

mechanical door safety device, facility of auto/ attended Rates Total Amount

mode. All car panel buttons and

Item of all floor switches must be Quantity

No. In figure to estimated

with brail language as per lift act. [4] All landing doors must quantities

be fire rated for 2 hour shall be fully automatic centre Rs. Ps.

1 opening/ telescopic opening 2made of hairline finish steel 3 4 5

grade of 304 with key holes and infrared curtains with

Unlocking facility from outside

[5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency

Light & Fan should start immediately without any Time

Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow

along with floor position indicator shall be provided inside

the car and at all floors.

[7] Full height infra red curtain with multiple cross /

crossing light beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided

accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility).

[9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open till

excess load is removed. [10] Spring buffers/PU Buffers

shall be provided.

[11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.

[12] Voice annunciator with suitable music shall be

provided in lift car.

[13] Self diagnostics system for operational and safety

parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor

calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor

doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by

engineer in charge. [17] Permanent wiring with necessary

safety devices like RCCB in all circuit, Over Voltage Under

Voltage protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall

be made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be arranged

by Lift Agency.

[18] Any civil/ electrical works for additional and alteration

in lift shaft and machine room related to erection of lift shall

be made by lift agency without any extra cost.

(granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

timer shall be provided.

[12] Voice annunciator with suitable music shall be Estimated

provided in lift car. Rates Total Amount

provided in lift car. Rates Total Amount

Item [13] Self diagnostics system for operational and safety according

Item of work Quantity Unit to estimated

No. parameters shall be provided in control panel. In figure

[14] Mechanical over speed governor with governor Rs. Ps.

calibration as per actual site parameters and submission of

calibration certificate submission, door key holes in the floor

doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine

room and monkey ladder for lift pit should be provided by

the lift agency, along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without

any extra cost, where ever required as / if directed by

engineer in charge. [17] Permanent wiring with necessary

safety devices like RCCB in all circuit, Over Voltage Under

Voltage protection and THD eliminator in circuit for lift

machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be

provided by the agency. Only 3 phase Power Supply shall

be made available by department in lift machine room.

Necessary Earthing as per Lift Act/Rules shall be arranged

by Lift Agency.

[18] Any civil/ electrical works for additional and alteration

in lift shaft and machine room related to erection of lift shall

be made by lift agency without any extra cost.

(granite/marble fixing around all landing door openings are

not in lift agency’s scope.)

[19] Agency has to provide all working drawings and

documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift

car [20A] As per statutory requirement of

Govt. Of Gujarat lift & escalator act 2000, lift agency has to

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third

party insurance upto completion of free maintenance period

and submit the document for the same. [21] Car Panel

Operating Buttons with floor position indicator/buttons must

be of Auto Glow type clearly visible when view from inside

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA rating voltage

controlled Stabilizer suitable for your controller, drive and

all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for

lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector) (B) SPECIAL

be made by lift agency without any extra cost.

(granite/marble fixing around all landing door openings are

not in lift agency’s scope.) Total Amount

not in lift agency’s scope.) Total Amount

Item [19] Agency has to provide all working drawings and according

Item of work Quantity Unit

No. documents and liaison services for obtaining all necessary In figure to estimated

permission from lift inspector and other authorities. quantities

[20] acrylic transparent licence/display A4 size holder in lift

1 car [20A] As2 per statutory requirement of 3 4 5

Govt. Of Gujarat lift & escalator act 2000, lift agency has to

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor.

4.carrying out third party lift inspection during/after lift

erection and provide report by third party authorized by

concern licensing authority 5.agency has to provide third

party insurance upto completion of free maintenance period

and submit the document for the same. [21] Car Panel

Operating Buttons with floor position indicator/buttons must

be of Auto Glow type clearly visible when view from inside

[22] For Physically Handicapped person Full Length

Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA rating voltage

controlled Stabilizer suitable for your controller, drive and

all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for

lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector) (B) SPECIAL

FEATURES DESCRIPTION OF LIFTS for PREMIUM

category 1. Advanced control system dual 64 bit

embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power

efficient operation,on site programming facility, Anti

nuisance, Pte-opening, BMS/RMS with necessary online

real time monitoring system having necessary connectivity

for remote monitoring & other suitable supporting hardware

& software devices to fulfil the purpose. 2. Floor Indication

LCD Display with call registration & brail mark with arrival

gong and hall lantern & TFT Screen in the car with MP3

Voice Announcer. 3. CAR Panel should be Scratch

resistive SS Moonrock finish / Hair Line / Honeycomb for

car and all Doors, All landing doors must have fire rating up

to 2 hours and car door must have multi-level crisscross

beam door protection. 4. To & fro communication system

& wiring (i.e. car , control room & guard room ) and Each

elevator are equipped with remote monitoring system.agency

has to provide mobile app and user id and password for

monitoring 8 / 10 Passengers, Ground plus 3 upper floor

with Rated Speed of 1.0 m/sec., (C) With General PLUS

ADDITIONAL SPECIAL FEATURES attached herewith.

Total Cost of Construction Cost

(Rupees Seven Crore Seventy Three lakh Eighty One Thousand Sixty One and Seventy Five Paise Only)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…77381061.75 Put to tender Rs.77381061.75

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

4 is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

Dismentalling of Credit materials amounting of Rs. -662286.87 must be recovered from Contractor's respective

Deputy Executive Engineer Executive Engineer

R&B Sub Division R&B Division

Khedbrahma Himatnagar