REPAIR TO CERTAIN ROADS AND ROAD FURNITURE AT MIL STATION DHARAMSHALA

Amount

Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal watering & well ramming, complete all as specified and directed.

Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg/10 Sqm, putting in premixed bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix using 20mm crushed stone aggregate rolled and compacted to required camber and gradient with 8 to 10 tonne power roller for depth of pot holes exceeding 30mm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces, depth exceeding 50mm but not exceeding 100mm deep and area not exceeding 400sqm complete all as specified. all as specified and directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 5 kg per 10 sq metre of road surface, laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using 20mm crushed stone aggregate, rolled and compacted to required camber and gradient with 8 to 10 tonne vibrator power roller, complete all as specified and directed. Note:- Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller.

Liquid seal coat, by applying paving bitumen as evenly binder @ 9.8 kg per 10 sqm blinding with 6.3mm size stone chippings @ 0.09 cum per l0 sqm and rolled to a uniform smooth surface, complete all as specified.

Taking down carefully metal tubular dealineator and refixing existing metal tubular dealineator in and including PCC 1:2:4 (150x150x300mm) type B1 using 20mm graded crushed stone aggregate complete all as specified and directed. Note:-Cost of earth work and PCC shall be deemed to be included in unit rate quoted by contractor.

Taking down carefully old cat eye and refixing with and including suitable epoxy and MS stud of suitable size complete all as specified and as directed.

Preparing bituminous/concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements using hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 mixed with radium glass beads @ 250gm/ Sqm with special applicator machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length.

Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixed in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

300 mm bore, Reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified and as directed.

M/s Thakur Engineers

M/S vp sharma