ED/IIMC/NIT/1/19-20 /161 2nd Call

Amount

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in all floor as per relevant IS codes. a) Pakur Variety

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in all floor as per relevant IS codes. a) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation, basement and upto roof of ground floor/upto 4 mtr. Tor steel/Mild Steel.

Hire and labour charges for shuttering with centering and necessary staging upto 4 mtr. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Brick work with 1st class bricks in cement mortar (1:6).

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar. 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per 100 sq.m.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Premium 100% Acrylic Emulsion

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : Two coats (with any shade except white) make: AkzoNobel Dulux/Asian Paints/Berger.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. Above Ground

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and in any height above ground with all lead, lift and scafolding complete. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). For Exposed Work. Medium quality.

a) 80mm Dia

b) 65mm Dia

c) 50mm Dia

d) 40mm Dia

e) 32mm Dia

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any height above ground with all lead, lift and scafolding complete. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). For Exposed Work. The job should include all nessesery brass fittings as required (Make- Supreme, Astral).

a) 40mm Dia

b) 32mm Dia

c) 25mm Dia

d) 20mm Dia

e) 15mm Dia

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). Make: Leader/ Lakshmi.

a) 80mm Dia

b) 65mm Dia

c) 50mm Dia

d) 40mm Dia

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) Ball valve including all associated works of approved make conforming to IS-15778: 2007 with all necessary accessories, .. (Make- Supreme, Astral)

a) 40 mm Dia

b) 32mm Dia

c) 25mm Dia

d) 15mm Dia

Supplying, fitting and fixing P.V.C. moulded water storage tank with following specifications: One piece moulded without any joints, 100% virgin material, Triple layer body, FDA approved material, 100% UV stabilized, Hygienic and suitable for potable water, non porous and does not allow water to get contaminated, protection against algae formation, rust proof, leak proof and water proof impact resistant, maintence free and odor free, dimension tolerances @ 3%, working design tempereture -5 degree C to 65 degree C and working disign pressure :- Atmospheric pressure. The job should be included with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials in any height above ground. (Make- Sintex, Patton)

a) 1000 litr. Capacity

b) 10000 litr. Capacity

Supplying, fitting, fixing, testing and commissioning of 5.5/4.0 (H.P./K.W.) Vertical Multistage High Pressure Centrifugal Pump motor set with base frame and Star Delta Panel. Detail of Pump- Make:- AQUATEX or KBI or KIRLOSKAR Series:- AVI series 2 pole 3 phase vertical multy stage in line pump set. Pump model;- AVI/15/05 Number of stage:- 5 Suction X Delivery = 65mm X 65mm Total head in Mtrs. = 50mtr Operating head renge in Mtrs. = 35 to 60 mtrs Detail of Motor- Make - CROMPTON or TEXMO or KIRLOSKAR 3 phase, 415 Volt, 50Hz Speed- 2900 RPM Degree of protection- IP 55 Insulation class- 'F' Class Starting - Star Delta

SENCO ENTERPRISE

MODERN INDIA PLUMBING WORKS