REPAIRS TO FENCING, PERIMETER WALL, GATES AND OTHER MISC WKS AT VARIOUS LOCATIONS IN TECHNICAL AND ADM AREA AT AFA HYDERABAD

Amount

Demolition of brick work/PCC Block masonry or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc as directed by Engr-in-Charge.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and directed by Engr-in-Charge.

M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed.

M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of PCC block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge.

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and as directed .

M & L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in copings as directed

Taking down and refixing/ restrainig or resecuring of concertina coil 600mm/900mm dia including making good staples/ fixing with GI wire of existing old complete all as specified and directed.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed by Engr-in-Charge.

Supply only chain link MS galvanised fencing of any size and type as approved by Engr-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire all as specified and as directed by Engr-in-Charge. Note :- The rate including for taking down existing fencing wire mesh any type

S & F Mild Steel works as in post, strut in fencing and including flat iron fillets for securing fencing including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engr-in-Charge.

M & L mild steel round bars as in bands, straps, supports or stays for chain link fencing conforming to Fe 410-0 all as specified and directed by Engr-in-Charge.

S & F Mild Steel works as in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel' complete all as specified and directed .

S & F Mild Steel works as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F Mild steel works as in Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming Fe 410-W (Gde E- 250) quality A

M&L for preparing new or previously untreated surfaces steel Surfaces of any des-cription, n exc 10cm in width or grith, not otherwise described, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of stone slabs / PCC tiles of any description or thickness in walls / floors, aprons etc incl removal of demolished material exc 1.5 km to 5 km

M&L 18 to 20 mm thick machine cut polished granite stone slab of approved colour and shade as in platforms , vertical surface.... etc fixed in cement mortar 1:4, pointing with epoxy grout of matching colour including grinding and polishing, moulding edges etc complete all as specified.

S&F in repairs 4 mm thick aluminium composite panel (ACP) with min 40mm square pipe not exc 600 C/C as per site requirement aluminium powder coated frame work including all fitting and jointing with sealant incl taking down old sheet with aluminium beading if any complete all as specified and directed .

S&F of framed structural steel work for Compound girders and stanchions up to ht 5.00m , lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Confirming Fe 410-W (Gde E- 250) quality A complete all as specified and directed .

Erection fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. and re-erection of the same incl necessary T&P at ht up to 5.00m

M & L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

S&F Stainless steel letters in repairs of any description over wall/ wall Granite slab / ACP Penal Length 40cm complete all as specified and directed .

S&F Stainless steel letters in repairs of any description over wall/ wall Granite slab / ACP Penal Length 25 cm complete all as specified and directed .

M/S NAVEEN BUILDERS (BID ID -3392893)

S J REDDY (BID ID -3403894)

Deepika Enterprises (BID ID -3396192)

SAI RAM CONSTRUCTIONS (BID ID -3389333)