PROVISION OF TOILET AT FMU OWC ANNEX CENTRE NO 201 A AND PROVISION OF EMERGENCY EXIT DOOR AT FMU OWC ANNEX C NO 201 A AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE I DM VISAKHAPATNAM

Amount

[SCHEDULE 'A' PART-I [B/R WORKS]

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavating in trenches, not exc 1.5 M wide and not exc 1.5 M in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and n exc 1.5 M in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 (type D-2) using 40mm graded stone aggregate as filling and mass concrete complete all as specified and directed.

M&L for Pre cast cement concrete type 1:3:6 type C-1 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil material exc. 1.50 km but n exc. 5 km and depositing where directed

M&L for hard core of broken stone or boulder of gauge not exc 63mm deposited spread and leveled in layers not exc 15cm thick watered and rammed to true surface all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate 100mm thick as in sub base for floors, hard standings etc complete all as specified and directed.

M&L for PCC 1:2:4 type B1, using 20mm graded aggregate 25mm thick as in floor and finishing the top surface even and smooth without using extra cement and spike rolling to surface or making impression of expanded metals whilst concrete green complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement and using WPC at the rate of 3% by weigth of cement complete all as specified and directed. Note :- WPC will be measured and paid seperately.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in backing coat to skirting complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7mm to 8mm thick (square or rectangular) of area exc 0.18 but n.exc 0.38 Sq.m in floor set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a priming coat of with alkaliresistant priming paint complete all as specified and as directed

M&L for preparation of new plastered surfaces of wall and applying two coats white wash complete all as s pecified and directed.

M&L for precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 75mm thick in cement concrete type C2 1:3:6 (Using 40mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supporting and fixing in opening as per specification and drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F stainless steel hinges 100mm long, medium weight, cold rolled and fixed to wooden or steel framed complete all as specified and directed.

S&F 200mm stainless steel tower bolt medium weight, cold rolled and fixed to PVC,wooden or steel framed complete all as specified and directed.

S&F 125mm stainless steel handles, medium weight, cold rolled and fixed to PVC,wooden or steel framed complete all as specified and directed.

S&F 250mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F 5.0mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S & F 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply fix Viterous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain(or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed.

S&F Vitreous China half stall uniral, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F urinal spreader of chromium plated push type with PVC pipe of 15mm bore as required complete all as specified and directed.

S & F Vitreous China urinal partition white of size 310x700mm complete all as specified and directed.

S&F brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F PVC low level flushing cistern 10 ltrs capacity including all fittings and brackets bends flush pipe etc and fixed in repairs complete all as specified and directed.

S&F PVC connection (high density) 15 mm dia 600 mm with PTMT nuts both ends with rubber washer complete all as specified and directed.

S & F 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

S & F 25 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

S & F Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm bore dia of pipe Bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head screwed both ends for Iron Pipe and fixed in repairs complete all as specified and directed.

S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S & F 110 mm bore PVC (SWR) , waste and rain water pipes single socketed in any length with rubber ring joints complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius all as specified and directed.

M & L 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal With access door complete all as specified and directed.

S&F Waste pipes 32 mm dia LDPE ,UPVC pipes of pressure rating 6 Kg/cm2 for wash basins and urinals complete all as specified and directed.

S&F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F wall mounted stainless steel (gde 304) toilet paper holder with flap of weight not less 300 gms complete all as specified and directed.

S & F soap dish vitreous china white of size 160x160x90 mm fixed to plug with chromium plated brass screw complete all as specified and directed.

S&F chromium plated tubular towel rail D Type of 20mm dia bore and 600mm long comlete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in PCC 1:3:6 type C-2 for 100 mm pipe complete all as specified and directed.

S&F anodised aluminium snap grid frame work of size 605x605mm using main and cross tee of size 15mm x 15mm 1.5mm ( weight not less than 0.12 kg / Rm) and wall angle of size 40mm x 25mm x 2mm ( weight not less than 0.36 kg / Rm) and 10mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, in ceiling with hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilng cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete , including cover fillets complete all as specified and directed.

Taking down chowkats or frames exc 1.5 SqM but not exc 4 SqM each (Without taking off shutters from the frame) all as specified and directed.

Cutting openings, through brick walls for door, window and other opening or enlarging existing openings, converting window into door openings, etc., or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc., to store and rubbinsh not exc. 50M all as specified and directed.

Form jambs etc., to opening in brick masonry, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete new work, built in cement mortar 1:6 all as specified and directed.

S&F pressed steel frames (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F steel door including projecting type hinges, steel handle, complete with glazing bars, devetailed or welded all as specified and directed.

S&F mild steel, plain, black sheet (1mm) in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws all as specified and directed.

[SCHEDULE 'A' PART-II [E/M WORKS]

M&L concealed point wiring with with 1.5 sq mm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with PVC conduit medium grade with all fittings and accessories of PVC conduit/ casing caping (like Tee, bend etc) complete fixed to walls etc with and including 1.5 sqmm (nominal area) PVC insulated stranded single core unsheathed FRLS copper cable as earth continity wire connecting to common earth point including supply & fixing of galvanized pressed mild steel Modular terminal boxes of suitable size as require for fixing modular switch socket regulator etc. complete all as specified and directed including necessary chase cutting for conduits to walls, floors and sinking boxes and making good to walls, floors complete all as specified and directed.

One light point controlled by one 5 Amps switch one way

One fan point controlled by one 5 Amps switch one way

Supply & fix modular type switch 6 Amp oneway single module all specified and directed.

S&F modular cover plate with support plate for 8 and above modules with anodised metal boxes all as specified and directed.

S&F Ceiling rose,3 phase /PVC/ polycarbonate,isolated body all as specified and directed.

Supply and fixing LED lights fitting 2x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F SP MCB 6 to 32 Amps C Curve complete all as specified and directed

S&F SPN MCB 32 Amps C Curve complete as directed

S&F SPN DB 8 Way double door with 200 amp rated bus bar all as specified and directed.

M & L for concealled type sub main wiring with 2 runs of 2.5 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 2.5 sqmm FRLS grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories , including necessary chase cutting for conduits to walls, floors and sinking boxes and making good to walls, floors complete all as specified and directed by Engr-in-Charge. Note:Cutting chases for DB &making good to wall shall be inclusive of quoted rate

M & L for concealled type sub main wiring with 2 runs of 6 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 6 sqmm FRLS grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLS ISI marked PVC conduit medium grade dia with conduit accessories , including necessary chase cutting for conduits to walls, floors and sinking boxes and making good to walls, floors complete all as specified and directed by Engr-in-Charge. Note:Cutting chases for DB &making good to wall shall be inclusive of quoted rate

Supply and fix LED building security light 70W IP 66 rated including supply and fixing with 40mm dia medium grade GI pipe bracket 1.5 mtr long bent to shape, mounted on pole/wall with suitable clamps nuts and bolts and all accessories complete including connection with 3 core PVC insulated sheathed flexible cable with multistranded copper conductor cable from ceiling rose to fitting terminal including taking down old unsv one all as specified and directed

S&F LED tube light fitting with LED tube, 2'long, 10 watt, CDL, 230 Volts , complete with all accssories internally pre wired incl dismantling taking down unsv FTL/CFL fiitings Complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers Complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers Complete all as specified and directed.

M&L earthing with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to GI wire 4 mm by means of nuts, bolts check nuts, washers of galvanised iron or steel connected to earth test point including excavation work in any strata with precasted pcc chamber with precasted PCC cover slab with GI protection pipe 40 mm dia light gde upto 7.5 mtr/20 mm dia tunnel pipe med grade but all as specified and directed.

SATYAMEGHA ENGINEERS (BID ID -3496479)

SINGH BUILDERS (BID ID -3496224)