Civil work

NAME OF WORK :- RENOVATION AND REPAIRING WORK OF TOILET BLOCK AT BUS-STAND, SHITAL CHOWK,

RAILWAY STATION, LAXMIPURA CHAR RASTA, NANA THAKRDAVAAS, MOTA THAKARDAVAAS, PANCHSIL VASAHAT

AND MATAJI MANDIR UNDER SWACH BHARAT MISSION URBAN 2.0, AT:- KHEDBRAHMA

MEMORANDUM SHOWING THE DETAILS OF ITEM OF WORK TO BE CARRIED OUT

Approved Total Amount

Approved Total Amount

IT Rate with according to

but may be Description Unit

No. 1% L.W estimated

Cess Rs. quantities.

1 196.00 Demolition of Brick work and stone masonry including stacking of Cmt 562.84

serviceable materilas and disposal of unserviceable materials with all

lead and lift.(ii) In Cement Mortar.

2 544.00 Dismentaling tiled of stone floors laid in mortar including stacking of SMT 49.18

serviceable materilas and disposal of unserviceable materials with all

3 89.78 Providing and laying cement concrete 1:3:6 (1cement: 3 coarse sand: 6 CMT 3231.26

crushed stone aggregates 40mm nominal size) and curing complete

excluding cost of formwork in

(A) founda on and plinth

4 4.50 Providing and laying controlled cement concrete M.200 and curing Cmt 4051.90

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns

and Mass concrete

5 2049.50 Providing 20 mm thick double coat mala cement plaster on interior brick Smt 284.33

/ concrete work for plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including scaffolding curing etc.

6 3777.50 Applying two coats of putty & two coats of primer of approved brand Smt 40.59

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

7 3777.50 Wall painting (two coats) with plastic emulsion paint of approved brand Smt 73.75

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

8 391.50 Providing and laying polished kota stone slab 25mm thick in risers of Smt 1166.93

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

Approved Total Amount

Approved Total Amount

IT Rate with according to

but may be Description Unit

No. 1% L.W estimated

Cess Rs. quantities.

9 653.00 Providing and laying white glazed tiles 6mm thick in flooring treads of Smt 950.53

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

10 28.00 Providing and laying Teliphone black granite stone slab flooring, dado SMT 2327.58

over 20mm (avg.) base of cement mortar 1:6 (1cement : 6 course sand)

and jointed with gray cement slurry including rubbing and polishing

11 48.00 Labour Charges half round edge for Granite. RMT 85.85

12 337.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking SMT 706.93

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

13 75.00 Providing and fixing pre-cast concrete kerb stone of gray cement based RMT 404.05

concrete block 30cm length,30cm height and 15cm thick of M200 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

14 3686.00 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or kg 131.83

welded in builtup for all type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of

Engineer in charge.

15 74.00 Painting two coats (excluding priming coat) on new steel and other metal Smt 68.57

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Approved Total Amount

Approved Total Amount

IT Rate with according to

but may be Description Unit

No. 1% L.W estimated

Cess Rs. quantities.

16 138.00 Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE Smt 2236.14

PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top

and bottom rails. M.S. frame shall have a coat of steel primer of

approved makde and manufactures. M.S frame covered with 5mm thick

heat moulded prelim PVC ‘C’ channel of siz 30mm thickness, 70 mm

width of which 50mm shall be flat and 20mm shall be tapered in

degree Angle on either side forming stiles, and 5mm thick, 95mm wide

pream PVC sheet out of which 75mm shall be flat and 20mm shall be

tapered in 45 degree on the inner side ot form top and bottom rail and

115mm wide prelim PVc sheet out of which 75nmm shall be flat and

20mm shall be tapered on both side to form lock rail, Top, bottom and

lock rails shall be provided either side of the panel. 10mm (5mm x 2)

thick 20mm wide cross PVC sheet shall be provided as gap insert for top

rail and bottom rails. Panelling of 5mm thck both side prelim PVC sheet

to be fitted in the M.S. frame welded,sealed to the stiles and rails with

7mm (5mm + 2 mm) thick x 15mm wide PVC sheet beading on inner side,

and joined togeth with solvent cement adhesive. An additional 5mm

thick PVC strip of 20mm width is to be stuck on the interior side of the

‘C” chanel using PVC solvent adhesive etc. complete as per direction of

Engineering in charge, manufacture’s specification and rawing.

17 359.50 Providing and laying broken china mosaic flooring for terrace using Smt 779.70

12mm to 20mm brocken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out up to surface using white cement including rounding of junctions and

extending them up to 15 cm along the wall,clearing with water and oxalic

acid etc. as directed.

18 26.00 Brick work using common burnt clay building brick having crushing Cmt 4214.33

strength not less than 35 kg/sq. cm. in foundation and plinth in cement

mortar 1:6(1 cement : 6 fine sand )

(B) Conventional

19 15.00 Brick work using common burnt clay building bricks having crushing Cmt 4526.75

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional + Extra for brick

work in superstructure above plinth level upto floor two level (B)

20 21000.00 Providing erecting and fixing double coated ISI water tank of required Ltr 3.95

capacity each with all necessary fittings and connection etc. complete on

21 34.00 Providing and fixing Urinal of approved quality including connection with Nos 1619.12

trap and with integral longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Approved Total Amount

Approved Total Amount

IT Rate with according to

but may be Description Unit

No. 1% L.W estimated

Cess Rs. quantities.

22 16.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or Nos 1519.50

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

23 16.00 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. Nos 67.91

24 16.00 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. Nos 78.75

25 16.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior Nos 859.41

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

26 425.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Rmt 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

27 305.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Rmt 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

28 100.00 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Rmt 119.15

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

29 220.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Rmt 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

30 245.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Rmt 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Approved Total Amount

Approved Total Amount

IT Rate with according to

but may be Description Unit

No. 1% L.W estimated

Cess Rs. quantities.

31 54.00 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) Each 982.13

size 580mm (Earthwork, bed concrete, foot reste and trap to be

measured and paid for separately) (A) Vitreous China.(I) Long pattern =

32 8.00 Providing and fixing wsh down water closet (European type, W.C. Pan) Each 1356.81

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately)(A) vitreous China Pattern :(i) in white

33 56.00 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan Each 59.07

34 57.00 Providing and fixing chromium plated brass half trun flush cock of Each 254.78

approved quality including fixing in pipe line etc. complete.(i) 20mm dia.

35 20.00 Providing and fixing screw down bib taps of following size.(A) Brass screw Each 186.83

down bib tap polished bright. (i) 15mm dia.

36 57.00 Providing and fixing screw down bib taps of following size.(B) Brass Each 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

37 16.00 Providing and fixing pillar tap, capstan head, screw down high pressure Each 308.73

with screws, shanks and back nuts. (i) 15mm dia.

38 400.00 P.V.C. Pipes 6 kgf / Sq.cm. 110 mm dia. Rmt 209.71

Approved Total Amount

Approved Total Amount

IT Rate with according to

but may be Description Unit

No. 1% L.W estimated

Cess Rs. quantities.

39 8.00 Construction of sock Well including up to minimum 1.80Dia X 3.00M Nos 29622.97

Depth excavating and dry rubble masonry work with top M:200 grade

C.c. Slab including top Filling with finishing curing etc. complete as

I / We am / are willing to complete work …………………... % below / above tendered rate mentioned.

Total Estimated Cost Rs. 50,72,272.00………………% Below / above Rs. …………………………………..

*(Please strike out whichever is not applicable).

All work shall be carried out as per public works Department Hand book and other specifications of Division or

GM\W v! ov AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

All the columns is schedule should be filled in ink and the total of the entires in the last column should be

struck by the contractor under his signature.

GM\W vZ ov VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<,F BFGFGL GM\WMGM ;ZJF/M SZL SMg8=FS8Z[ 5MTFGL ;CL SZJL

Rates quoted include clearnace of site ( prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

8F\S[,F NZDF\4 :Y/GL s SFDGF VFZ\E[ VG[ 5}~ YFI T[ JBT[ f NZ[S ZLT[ ;FO;}OL SZJFGM ;DFJ[X YFI K[P VG[ T[ NZ TDFD 5lZl:YlT 4 :Y/4

E[H4 CJFDFG JU[Z[ C[9/ SFD DF8[ VD,DF\ ZC[X[P

Note -4- To be continued on additional sheets, if found necessary.

GM\W v$ ov H~Z H6FI JWFZFGF SFU/M HM0L RF,] ZFBJ]P

Signature of Contractor

CHIEF OFFICER PRESSIDENT

Khedbrahma nagarpalika Khedbrahma nagarpalika