Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.0 LAccepted-AOC | ₹2.0 L Quoted ₹2.7 L | 1 | Accepted-AOC Accept |
| 2 | 2₹2.8 L+₹9,280 (3.43%)Rejected-AOC GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | ₹2.8 L+₹9,280 (3.43%) | 2 | Rejected-AOC Reject |
| 3 | 3₹3.0 L+₹24,390 (9.01%)Rejected-AOC | ₹3.0 L+₹24,390 (9.01%) | 3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | M/S Silicon Fusions L3 | Sanskar Thakur L1 | Rakesh Kumar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work jumper work, blasting work in soft/hard rock, chiselling in soft/hard rock including wedging out upto all lift, stacking the excavated soil upto all lead clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths, sides of foundation etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfaction of Engineer-in-Charge upto all lead and lifts | 33.75 | Cum | 502 ₹16,942.5 | 350 ₹11,812.5 Lowest | 390 ₹13,162.5 |
| 2.00Providing circumferencial Butt welded joints by electrical arc welding to various dia G.I. Pipes medium/Heavy class, light & MSERW pipe welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge | ||||||
| 3.00 | 750 mm dia | 8 | Joint | 5,670 ₹45,360 | 5,400 ₹43,200 Lowest | 5,500 ₹44,000 |
| 4.00 | 700 mm dia | 8 | Joint | 4,680 ₹37,440 | 4,400 ₹35,200 Lowest | 4,500 ₹36,000 |
| 5.00 | 550 mm dia | 8 | Joint | 4,680 ₹37,440 | 4,200 ₹33,600 Lowest | 4,500 ₹36,000 |
| 6.00 | 300 mm dia | 5 | Joint | 5,690 ₹28,450 | 5,400 ₹27,000 Lowest | 5,500 ₹27,500 |
| 7.00 | 150 mm dia | 5 | Joint | 1,800 ₹9,000 | 1,550 ₹7,750 Lowest | 1,700 ₹8,500 |
| 8.00Providing & welding of MS flange (IS:6392-1971) of tableIS:816-1965 with electeode as per IS:814-1967 i/c required Nos of bolts & nuts as per IS:1369-1967 & 3 mm thick asbestos fibre jointing gasket conforming to IS: 2712-1965. The welding of flange should be done in two layer on both faces to make to the joints air tight & to the entire satisfaction of Engineer-in-Charge. | ||||||
| 9.00 | MS flange 750 mm dia FT:17 | 2 | Each | 19,200 ₹38,400 | 19,000 ₹38,000 Lowest | 19,100 ₹38,200 |
| 10.00 | MS flange 700 mm dia FT:17 | 2 | Each | 17,150 ₹34,300 | 16,500 ₹33,000 Lowest | 17,000 ₹34,000 |
Tender Value
₹3.0 L
EMD Value
₹5,955
Closing Date
19 Dec 2025, 5:00 pmClosed
Executive Engineer
JS Division Dharampur Bharari
Restoration of rain damages to various LWSS LIS WSS under JSV sub division Dharampur in Tehsil Dharampur Distt. Mandi HP
2025_HPIPH_123142_1
10566-10616 Dated 10-12-2025
Open Tender
Civil Works
Item Rate
90 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer
₹5,955
8 May 2026
10 Dec 2025
20 Dec 2025
10 Dec 2025
19 Dec 2025
10 Dec 2025
Excavation in foundation, trenches etc. in all kinds of soil such as pick work jumper work, blasting work in soft/hard rock, chiselling in soft/hard rock including wedging out upto all lift, stacking the excavated soil upto all lead clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths, sides of foundation etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfaction of Engineer-in-Charge upto all lead and lifts
750 mm dia
700 mm dia
550 mm dia
300 mm dia
150 mm dia
MS flange 750 mm dia FT:17
MS flange 700 mm dia FT:17
MS flange 550 mm dia FT:17
MS flange 150 mm dia FT:17
750 mm dia
700 mm dia
550 mm dia
150 mm dia
Providing, supplying and fixing of Nuts and Bolts complete in all leads and luft a per direction and to the entire satisfaction of Engineer in charge.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.61 MB
Form6.pdf
Tender Documents • 0.81 MB
TC.pdf
Tender Documents • 0.13 MB
BOQ_180915.xls
BOQ • 0.28 MB
Form8.pdf
Tender Documents • 1.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .