Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 CrAccepted-AOC DISTT BARMER | BARMER | ₹11.7 Cr Quoted ₹12.0 Cr | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹13.7 CrRejected-Finance | ₹13.7 Cr | L2 | Rejected-Finance Being other than lowest bidder |
| 3 | L3₹14.0 CrRejected-Finance | ₹14.0 Cr | L3 | Rejected-Finance Being other than lowest bidder |
| 4 | L4₹14.0 CrRejected-Finance NOT SPECIFIED | ₹14.0 Cr | L4 | Rejected-Finance Being other than lowest bidder |
| 5 | L5₹15.0 CrRejected-Finance | ₹15.0 Cr | L5 | Rejected-Finance Being other than lowest bidder |
Tender Value
₹10.9 Cr
EMD Value
₹8.7 L
Closing Date
16 Feb 2022, 6:00 pmClosed
HQ CEJZ JODHPUR
HQ CEJZ JODHPUR
PROVN OF OTM ACCN FOR HAV AND OR AT BARODA (JOB NO MG AND G AREA/AMWP/09/2020-21)
2021_MES_495247_1
800547/BRD/E8
Open Tender
Civil Works
750 days
GE (A) BARODA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹3,000
GE (A) BARODA
₹8.7 L
Yes
26 Feb 2022
16 Dec 2021
19 Feb 2022
16 Dec 2021
16 Feb 2022
4 Feb 2022
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 26(R)
Lump sum price worked out by the contractor for "SITE CLEARANCE EXCAVATION & EARTH WORK " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27(R)
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28(R)
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31(R)
Lump sum price worked out by the contractor for "ROAD, PATH AND CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35(R)
Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 36(R)
Lump sum price worked out by the contractor for "COMPOUND WALL, GATE & ARRANGEMENTS FOR DRYING CLOTHES" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38(R)
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41(R)
Lump sum price worked out by the contractor for "HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 42(R)
Lump sum price worked out by the contractor for "SUMMER APPLIANCES" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 43
Lump sum price worked out by the contractor for "ARBORICULTURE" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 44
Lump sum price worked out by the contractor for "DEMOLITION (B/R AND E/M)" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45
Sch 'A' PART-XV (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
INTERNAL WATER SUPPLY S&F of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
S&F of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
S&F of CP pillar tap swan neck ISI marked complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
S& F overhead shower 100mm dia of ABS body crome plated with gray face plate with arm having swivel joint chromium plated complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
S&F two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
S&F jet spray system chromium plated steel body with flexible pipe complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
S&F 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.
INTERNAL ELECTRIFICATION S&F energy saving 9 Watt LED bulb input operating voltage range 100-270V AC, CCT-6500K, operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux equal/ greater than 460 lumens , CRI equal/ greater than 80, Base B22 all as specified and directed.
S&F wall mounted compact one piece, decorative LED tube light fitting 1x10w comprises of extruded channel in thermally conductive material, high translucent serrated milky white diffuser, input operating voltage range 120-270V, CCT-6500K, view angle 120(Min),operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux efficacy equal/ greater than 100 lumens per watt, CRI equal/ greater than 75,THD equal/ less than15%, free of glare along with integrated constant current SMPS based LED driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose. Make: Crompton model LDL-10-NW or technocommercial equivalent makes as per Appx "C".
S & F wall mounted decorative box type tube light fitting suitable for T8 tube , double side connection including LED polycarbonate tube T8, 1x20W, input operating voltage range 120-270V, CCT-6500K, view angle 120(Min),operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux efficacy equal/ greater than 120 lumens per watt, CRI equal/ greater than 75,THD equal/ less than15%,free of glare along with integrated driver with metal heat sink complete and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose. Make: Crompton model DMLN1LT8-16 (Batten) & LT8-20-865 or technocommercial equivalent makes as per Appx "C".
M&L LED security Light luminaire 30 watts, input operating voltage 120-270V, CRI - equal/greater than 70, CCT-6500K, PF more than 0.90,Luminous flux efficacy equal/ greater than 110 lumens per watt, IP 66 made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver upto 10KV surge protection fitted with adjustable pole adopter with suitable GI pipe bracket 25mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts all as specified and as directed. Make: Crompton model LSTS-30-CDL-M or technocommercial equivalent makes as per Appx "C".
Note for item No 26.00: (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.
S&F roundal surface mounting LED panel,PDC aluminium housing and high translucent frosted plastic difuser along with integrated driver complete LED light 12 W, luminaire efficacy 100 lm/w and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose all as specified and as directed. Make Crompton model LCDSPLN-R-12-WW or technocommercial equivalent makes as per Appx "C".
S & F bulk head LED fixture 10W, IP65, CCT-5700K,PF more than 0.90,Luminous flux efficacy equal/ greater than 100 lumens per watt giving glare free light and all as directed by Engg in charge. Make Crompton model LBHP-10-CDL or technocommercial equivalent makes as per Appx "C".
S&F ceiling fan of 1200mm sweep energy efficient, ISI Mark, super enamelled copper wound, class B insulation, rated power 50W+/- 10%,rated speed 350rpm+/-10%, power factor equal/ greater than 0.90, air delivery 226 CMPM,rated voltage 230V including down rod and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed. Make: Havells model ES Plus or technocommercial equivalent makes as per Appx "C".
S&F plastic body exhaust fan of 250mm sweep, energy efficient, super enamelled copper wound, class B insulation, rated power 32W +/- 10%,rated speed 1350 rpm +/- 10%, Temprature rise 75degree centigrade Max,power factor equal/ greater than 0.90, air delivery 520 CMH,rated voltage 220-240V with louver shutter including fixing/ grouting of frame in wall and cutting opening complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed. Make: Havells model VENTILAIR DX or technocommercial equivalent makes as per Appx "C".
S&F metallic body exhaust fan of 300mm sweep, energy efficient, super enamelled copper wound, class E insulation, rated power 55W +/- 10%,rated speed 900 rpm +/- 10%, Temprature rise 75degree centigrade Max,power factor equal/ greater than 0.90, air delivery 1275 CMH,rated voltage 220-240V with suitable size louver shutter including fixing/ grouting of frame in wall and cutting opening complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed. Make: Havells model TURBO FORCE HD or technocommercial equivalent makes as per Appx "C".
S&F wall mounted fan 400 mm with double rotary string to regulate the speed complete and having rated speed 1350 +/- 10% RPM, power rated 50W+/- 10%,Power factor 0.90 Min, Air delivery 72 Cum/ Minute,50 Hz, 230V,supper enamelled copper wound motor and accessories complete all as specified and directed.
S & F Vertical type TPN DB 4 way double door with incoming as MCCB TP 415 volts AC 3 phase 50 Hz with fixed magnetic setting for current rating of 100 Amps 16 KA (MCCB TP confirming to IS 13947 (P-2) IEC:947) made out of CRCA sheet housing with powder coating & confirming to IS 13032, IS 8623, BS 5486 accomdated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting with one coat of red oxide and powder coated all as directed
M&L for Submain wiring with 4 runs of single core 10 sqmm PVC insulated unsheated multistranded FRLS 1100 volts grade with copper conductor drawn through non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25mm dia including one run of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed.
M&L for Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated multistranded FRLS 1100 volts grade with copper conductor drawn through non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25mm dia including one run of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed.
M&L for TV coaxial socket outlet deluxe including pressed steel sunken box of suitable size with cover plate & TV cable drawing through 25 mm dia PVC conduit pipe complete as specified and directed.
S&F Single pole and Neutral enclosure with a three pin and earth plug and socket metal clad complete with one single pole MCB 20 Amps all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia medium grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete.
NOTE FOR ITEM NO. 38.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 15 mm bore medium grade 7.5 mtr.
ROAD, PATH AND CULVERT M&L for 150 mm thick (compacted thickness) Wet Mixed Macadam (WMM) in two layers (75mm thick each) conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted surface of soling as specified in clause 406 3.5 of MORTH&H specification complete all as specified and directed.
M&L for preparing bituminous surfaces of road and applying road marking paint 2.5 mm thick width n exc. 15 cm with hot applied thermoplastic road marking paint like stop lines, dashes, arrows etc of approved colour conforming to BS 3262-1989 with 20% glass beds (intermixed) spread and laid by automatic mechanical machine engine at approx temprature of 160 degree celcius with special applicator machine all as per manufacturer's instructions complete all as directed.
S&F metal tubular delinator made out of ABS round body fitted with 2 nos 100 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm heigh duly powder coated and thermo plastic polyster elastomer 3 bands of green red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for refletor protection including embedding in PCC 1:2:4 (150mm x 150 mm x 300 mm) type B1 complete all as specified and directed. Note;- (Rate quoted for the item shall deemed to be inclusive of the cost of excavations and earth work required and any other minor works required at site. (ii) Make - Model No DA 952 GP of Dark Eyes or equivalent as approved by GE
S&F for Road studs (Cat-eye) of size 100 x 100 mm, white or yellow colour, ABS material body with reflective glass elements (white or red) fixed on road with two component epoxy hardner and resin / HT nail as per manufactures Instructions complete all as specified and directed.
S&F solar cat eye of diamond size 125x125x8 mm, anti twisted ribs on the bottom complete all as specified and directed.
EXTERNAL WATER SUPPLY Supply, laying, connecting, jointing and testing ductile iron pressure pipe ISI marked to IS-8329-2000 Reaffirmed - 2005 Edition 4.1 suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, class K-7 with socket and with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including "Push on joint" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed - 2003) with dual hardness of type -2 (bulb) and type -5 (Heel) quality laid in trenches complete all as specified and directed of dia 100 mm complete all as specified and directed.
Supply, installation, connecting and testing sluice valve, cast iron body (Long body) class PN-1.6 with flanged ends drilled suitable for bore of pipe 100 mm, ISI marked (IS-14846 of 2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket etc. complete all as specified and directed.
M&L for Construction of valve chamber of size 750 mm X 750 mm X 600 mm (internal dimensions) with PCC foundation 1:4:8 type D-2 using 40 mm graded stone aggregate,150 mm thick & 150 mm wide offsets all around, brick masonary walls built in CM 1:6, 75 mm thick PCC 1:2:4 Type B-1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, without using extra cement internally including top of floor including excavation earth work in any type of soil, 3.15 mm thick MS sheet cover fixed on 50 mm X 50 mm X 5 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.
M&L for Construction of valve chamber of size 900 mm X 900 mm X 600 mm (internal dimensions) with PCC foundation 1:4:8 type D-2 using 40 mm graded stone aggregate,150 mm thick & 150 mm wide offsets all around, brick masonary walls built in CM 1:6, 75 mm thick PCC 1:2:4 Type B-1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, without using extra cement internally including top of floor including excavation earth work in any type of soil, 3.15 mm thick MS sheet cover fixed on 50 mm X 50 mm X 5 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.
EXTERNAL ELECTRIFICATIONS S & F of street light Engineering plastic one piece moulding control box (size 300x200x150mm) with locking arrangement made out of HDPE and FI clamp 25 x 3 mm complete including MCB SP 6 Amp 240 Volts complete with 02 Nos aluminium busbar of rating 63 amps for phase and neutral on porcelain based insulators and fixing clamps to pole for street lights complete all as specified and directed
S & F of LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made out of GI pipe light grade 40mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed
M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized iron strip earth 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete as detailed below and all as directed.
NOTE FOR ITEM NO 50.00:- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC M25 design mix using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.5 M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.5 M GI earth strip of size 32 x 6 mm. Any variation in length shall be adjusted through deviation order.
Supply, installing, testing and commissioning factory made and CPRI type tested LT feeder pillar box (KIOSK) double door platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having Aluminium bus bar installed on SMC/epoxy insulators. The panel shall be dust and vermin proof, IP-65 class protection and made of 3.15 mm CRCA MS sheet and 40 X 40 X 6 mm thick angle iron frames work front opening type with double door shutter and locking arrangement (including provn of 65 mm Godrej (freedom) lock with 2 keys) powder coated finish (over a coat of red oxide) primer on outside and two coats of red oxide primer on inside surface.
S&F Pole mountable (Timer switch for street lights) sensor based, astronomical and nature type timer switch with Nature switch - 02 Nos, power contactor for load switching, MCB, and terminal block, including complete with mounting brackets, cable glands, openable door with lock and key. The enclusure made of UV stabliszed, FR grade special moulding compound to provide a rust proof, electric shock proof, termite proof, outdoor mountable electrically insulating body capable of enduring solar radiation in the outdoor.
DG SET Supply, install, testing and commissioning of 100 KVA Diesel Engine driven generating set with acoustic enclosure made out of CRCA Sheet powder coated, specially designed lifting arrangement/hooks, meet the latest CPCB, norms of 75 dBA from 1 mtr distance and as per the testing guide line of CPCB, DG Set shall be conforming to IS:10001/10002 and alternator as per IS: 13364, coolant cooled type, self starting system with 12 volt DC Supply, 3 phase 4 wire AC 415 volt + 5% at 1500 RPM, 50 Hz, 0.8 PF self exiled, self regulated, Automatic voltage regulation, class 'H' insulation type alternator installed on PCC foundation platform with and including following accessories:-
(q) Digital Manual and AMF control panel : Digital Manual is euiped with 16 bit high speed RISC processor based controller. It displays the followinf parameters Safety system with special sensors to safe guard the engine against faults, like low lub oil pressure, high coolant temperature, battery over/under/weak volt, fail to crank/start, sensor failure, over speed, low fuel level etc with alarm. (r) AC Alternator protection Over/Under Voltage, Over/Under Frequency. (s) 'Preset' system with push button. (t) DC Voltmeter - 1 No. (u) Mechanical governor. (v) Reverse power relay & reverse reactive power relays. (w) Neutral switching facility. (x) SMPS suitable for charging, 12 volt battery with trickle and boost facility - 01 No. (y) Independent earthing terminals for engine & alternator - 2 each (z) Battery charging alternator 12 volt. (aa) M & L for making PCC foundation (1:3:6) type C1 including form work of size 4 x 2 x 2 Mtr height along with necessary earthwork and excavation in any type of soil, brick work in CM(1:4), 15 mm thick rendering in CM (1:6) surface even and smooth. Flooring PCC (1:3:6), type B1 using 20 mm graded stone aggregate , 100 mm thick over 150 mm thick hard core over rammed earth for 100 KVA DG Set complete all as specified and as directed. (ab) Height of PCC foundation of DG set should be above FFL of proposed SM barrack. Note:- Height of platform shall be decided by the GE as per site requirment.
SUMMER APPLIANCES Supply, install, connecting and testing of water cooler fully stainless steel non- corrosive electric driven (single phase) having approx storage capacity 80 Ltrs self contained drinking water cooler with (Non - CFC refrigerant) energy efficient compressor and nominal cooling capacity of 40 Ltrs/Hrs, two nos faucets including connecting of incoming GI pipe medium grade and gate valve of suitable size with necessary PVC Nylon braided pipe, PCC platform including draining water provision etc. complete all as specified and directed.
Supply, installation and testing of refrigerator not less than 300 litre capacity, 230 Volts, 50 Hz, 5 star rating, frost free, double door with humidity control and deodorizer, toughened glass shelves, inverter technology compressor, rust resistance body, dual thermostate for refrigerator & freezer, with cool pack complete all as specified and directed
S&F copper wound voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 130V to 290V with output voltage stabilized at 200 Volt to 240 Volt rated for 4 Amps of capacity 1 KVA having the low cut, high cut with time delay provision complete all as specified and directed.
Supply, installation and testing of commercial evaporative type Air cooler (Desert Cooler) metallic body 16 SWG guage metal sheet having capacity of 4000 cum/hr, copper wound motor (make - Usha / Khaitan / CG), single phase, 230 Volts operated and water storage capacity not less than 50 ltrs, 15 mm dia floot valve and suitable PVC connectors, mosquito proofing net for all sides including fixing arrangements with suitable size of MS angle iron stand with wheel arrangements complete all as specified and directed.
Supply, installation and testing of commercial evaporative type Air cooler (Desert Cooler) Plasticbody, 230 Volts, single phase, having capacity of 5000 cum/hr (450mm sweep), water storage capacity not less than 70 ltrs, 15 mm dia floot valve and suitable PVC connectors, mosquito proofing net for all sides including fixing arrangements with suitable size of MS angle iron stand with wheel arrangements complete all as specified and directed.
ARBORICULTURE S&F sprinkler suitable for 15 mm bore pipe along with adjustable stand of height 30 to 45 cm with all arrangements compete all as specified and directed.
DEMOLITION (B/R AND E/M) Dismantling of barbed wire fencing including clips or binding wire compete all as specified and directed.
Taking down carefully UNSV main switch and DB's including MCB's of any size, type and capacity.
Dismantling and taking out submain wiring 2/3/4/6 wire of any size and taking out from site.
Dismantling and taking out servies connection / cable of any size and taking out from site.
Dismantling and taking out unserviceable earthing from site.
M&L for Construction of SWT 75000 Ltr Capacity, Excavation in any type of soil, PCC 1:3:6 type C-2 in foundation, RCC M-30 Grade Design Mix as in Base slab ,Walls etc incl formwork & TMT steel reinforcement, Rendering 10 mm thick over RCC surfaces in CM 1:3 finished even & smooth complete incl steel rungs etc complete all as shown in drgs No CEJZ/STR/STD/19/2021 sheet No 1/2 to 2/2.
SANKALP INFRACON
Hi Tech Transpower Pvt Ltd
United Sales Corporation
Hariom Projects Pvt Ltd
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid