Construction of Vegetable Market At T. P. S. No.3 (Karanj), F. P. No. 23 in East (Varachha) Zone - A.

DESCRIPTION QUANTITY UNIT AMOUNT

WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and

stacking off useful materials and disposing of the

1 excavated stuff up to 50 mt. lead and all lift, watering

etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 995.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in

situ piles) & disposal of the surplus excavated soil as

directed within a lead of 50 M. For following diameter

250mm dia 0.00 Rmt 326.84

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing &

3 filling interstics with Quarry Spalls complete for all 244.00 C.M. 1064.80

leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO.

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

4 Crushed stone agg 20m.m Nominal size) &curing comp.

excl. cost of form work in :(a) foundation & Plinth

(A) Foundation 141.00 C.M. 3005.76

(C) Grade Slab 0.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement :

sand : 4 graded stone agg. 20 mm nominal size) & curing

comp. Includ. cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass

(C) Grade slab 86.00 C.M. 3637.34

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as

6 per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work

and rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as

7 per IS 456:2000 (latest revision) and as per tender

specification in all items including cost of form work

and rendering but excluding cost of reinforcement

DESCRIPTION QUANTITY UNIT AMOUNT

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74

(2) Having cross sectional area more than 0.085 sq. mt

.up to 0.12 sqmt.

(3) Having cross sectional area more than 0.12 sq. mt. 131.00 C.M. 9190.79

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86

(2) Having cros sectional area more than 0.08 sq. mt

and upto 0.12 sq.mt.

(3) Having cross sectional area more than 0.12 sq. mt . 104.00 C.M. 6999.09

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

8 crushed stone agg. 20 m.m Nominal size)& curing comp. 0.00 C.M. 3982.62

incl. cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97)

Providing & fixing IS Mark TMT Bar FE 500d

9 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Upto G.L./P.L. 67335.00 Kg. 76.21

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash

bricks having crushing strength not less than

Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 2 It No. 16)

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10)

Filling in foundation and plinth with murrum or

12 selected soil in layers of 20cm. thickness including 99.00 C.M. 289.06

watering, ramming and consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11)

carrying out plinth treatment to post

construction/existing structure by spraying chemical

solution for termite control treatment including labour

and material consisting with ISI specification using

13 chlordene and chiorpurfiles 20 EC as per 6131_part II 660.00 S.M. 82.89

concentration weight one litter give 1% concentration

inclusive of one litter chemicals emulsions application

at the rate of 5 litter chemicals /sqmt of surface is

recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

Providing & Applying 20mm. Th. Heavy Roller plaster

on walls or similar surfaces at all floor levels consisting

of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3

sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1cement:

sand) apply thick cement slurry and apply roller

horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by

engineer incharge.

DESCRIPTION QUANTITY UNIT AMOUNT

(SOR SMC Pg No. 3 It No. 28) MR

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the

architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry

and free from all loose dirt, chalk, grease, fungi,algae

15 and flaking paint. This can be achieved by brushing with 73.00 S.M 82.00

a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and

Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer

and allow it to dry for 4-5 hours.Application of putty is

not recommended.

Minimum 4-6 hours duration is required between each

coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

TOTAL COST UP TO PLINTH

WORK ABOVE PLINTH

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash

Ground Floor 73.00 C.M. 4511.97

Half brick masonry in common brunt clay building

bricks having crushing strength not less than

17 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse

sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 0.00 S.M. 678.86

Providing & Applying 15mm.th.cement plaster in

single coat on brick/ concrete walls similar surfaces for

plastering & finished even & smooth with a floating coat

of cement slurry mixed with admixture of lime or neeru

in required proportion etc. comp. in C.M 1:3 (1 cement :

(A) for wall and similar surfaces

Ground Floor 0.00 S.M 237.51

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & Applying 20mm. Th. Heavy Roller plaster

on walls or similar surfaces at all floor levels consisting

of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3

sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1cement:

sand) apply thick cement slurry and apply roller

horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by

engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the

architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry

and free from all loose dirt, chalk, grease, fungi,algae

20 and flaking paint. This can be achieved by brushing with 291.00 S.M 82.00

a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and

Clean the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer

and allow it to dry for 4-5 hours.Application of putty is

not recommended.

Minimum 4-6 hours duration is required between each

coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete.

Ground Floor 666.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse

22 sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing

and polishing etc. complete.

Ground Floor 2.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

DESCRIPTION QUANTITY UNIT AMOUNT

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

23 burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters. (A)

For plain grill For all Floor

For all Floors 0.00 S.M 65.31

SMC SOR, colour works,item no.-8,Pg No.15

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same

with necessary stainless steel nuts and bolts complete,

i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc.,

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only

weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts,

fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 0.00 Kg. 450.00

Providing & Fixing Polycarbonate sheet roofing with

surface of the sheet is coated with an anti-UV Co-

extrusion layer having good weather resistance, it can

maintain its optical properties and mechanical

performance for a long time. Fasting is usually done by

screws. The fastening screws should be inserted about

500 mm apart and 300mm apart Along the supporting

25 internal purlin and edge pulin.All fixing holes with

diameter at least 2 mm larger than screw must be

predrilled into each screw location. The screws should

be 6mm diameter with length according to sheet

thickness and corrosion resistant, with at least heavy

duty hot dripped galvanized or stainless steel. Excluding

the cost of purlins rafter and trusses.

2 mm thick Solid Sheet 1691.00 S.M 1510.00

SMC SOR , PAGE NO 10, IT NO

Providing & fixing colouron galvaniced steel, zinc /

aluminium allus coated sheet 0.5 mm. thick roofing

fixed with gslvanised grom J or Lhook bolts and bolt

8mm dia with bituman and impet washer filled with

white lead etc. Excluding the cost of purlins rafter and

trusses. (Tata /Jindal or equivalent)

SMC SOR , PAGE NO 9, IT NO 101 MR

DESCRIPTION QUANTITY UNIT AMOUNT

Providing corrugated G.I. Sheets of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8m

diameter with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses. (1)

0.80 mm thick sheet. (Tata / Jindal or equivalent)

SMC SOR , PAGE NO 9, IT NO

Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with iron

28 brackets 40mm x 3mm size bolts, nuts, washers etc. 300.00 R.M 561.27

including marking necessary connection with rain water

pipes. (i) 0.8 mm thick

SMC SOR , PAGE NO 9, IT NO

Providing ridges or hips 600mm over all in plain G.I.

sheet fixed with G.I. "J" of "L" hooks bolts and nuts 8mm

dia G.I. limpet and bitumen washer

complete (1) 0.80 mm thick

SMC SOR , PAGE NO 9, IT NO

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint

30 (A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common

raffers & the like. For all Floor

For all Floors. 703.40 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing and Fixing Hollow steel Sections Framed

Work including Cutting, Hoisting, Welding & Fixing in

31 position Purlin, Main Chord etc. as per Engineer in- 2070.00 Kg. 126.00

charge.TATA / JINDAL / ASIAN Make

SMC SOR-PAGE NO 12 IT NO 132 MR

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or

equivalent make including cost of all equipments, tools,

material, labour, etc. Standard procedure as mentioned

in manufacturer's specifications shall be strictly

followed, which shall be submitted and got approved

from the authority prior to start of work. The rate shall

also include cost of drilling of hole of required diameter

and depth as mentioned in manufacturer's specification,

cleaning the hole with required air blower and other

necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but

excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-in

DESCRIPTION QUANTITY UNIT AMOUNT

fixing of CO2 type Fire Extinguisher of capacity 4.5 kg

filled with Co2 Gas as per IS 15222 with controll

33 discharge mechanis, fitted with Hose & Horn applicable 20.00 Nos 4200

on Class B fire rating 21B confirms to IS 15683 bearing

ISI mark. Co2 cylinder as per IS

SMC SOR, PAGE NO.12,IT NO 136 (MR)

Supplying & erecting ABC powder type 'Ceasefire'

34 type Fire extinguisher as per IS 4308 with necessary 20.00 Nos 2000

clamp for erection on wall.6 Kg Capacity

SMC SOR, PAGE NO.12,IT NO 135 (MR)

Supplying FIRE bucket round bottom of 9 litres

capacity made out of 24 gauge G.I. sheet with extra

35 handle at bottom duly painted white inside and Red out 20.00 Nos 350

side with FIRE mark, filled with dry-sand and kept on

existing stand provided or hung on wall hook.

SMC SOR, PAGE NO.12,IT NO 137 (MR)

TOTAL COST OF SUPER STRUCTURE

WATER & SUPPLY SANITATION

Providing & fixing U-PVC pipes Confirming to IS no.

13592 (Type "A") of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make for rain water at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) (A)

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to

37 pipes of prince, suprime, jain Or Eqivalent make etc.

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC

drainage pipes for concealing with cement plaster

38 mm avg thickness(CM 1:3 [1 cement :3 coarse sand])

finishing as per instruction given by Eng. incharge. For

75mm PVC pipe 0.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Total cost of Water supply & sanitation

(A) Total amount up to plinth

(A) Total amount up to plinth

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

PART (D) : Internal Electrical- ABSTRACT SHEET

NOTE:For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to 1-2-

NOTE:-2 For point wiring in bathroom and W/C and washbasin area in residential quarters reduce overall rate by 50% of

point wiring for light.

Sr. Description of Work/ Item Qty Unit Cess

PART 01: Internal Wiring

DESCRIPTION QUANTITY UNIT AMOUNT

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat III

Point wiring for secondary light point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of ISI marked

KV grade ZFLR/HFFR PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary

light with accessories erected on Metal / PVC / wooden

box covered covered with appropriate front plate modules

erected on / in wall / ceiling for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.as per pipe erected with following type of

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

DESCRIPTION QUANTITY UNIT AMOUNT

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat-III (ZFLR/HFFR)

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu.

Wire with 2.5 sq.mm ( green) earthing wire from mcb d b

board.f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Cat-III. (ZFLR/HFFR)

Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories

Cat. III (ZFLR/HFFR)

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade ZFLR/HFFR PVC insulated multi

strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured/ metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (ZFLR/HFFR)

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat. III

10 (7) Blank Plate Single Cat. III 4.00 Each 25.25 ₹

11 (11) 6 Amps. Bell Push CAT III 0.00 Each 151.50 ₹

DESCRIPTION QUANTITY UNIT AMOUNT

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc.

15 complete of following sizes. ₹

19 (3) 50 mm x 50 mm trunking 0.00 Mtr. 188.87 ₹

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size.

[c] 2 wire 1.5 sq.mm

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

34 (g) One wire 16.00 sq. mm 0.00 Mtr. 236.34 ₹

35 (h) One wire 25.00 sq. mm 0.00 Mtr. 300.98 ₹

36 (i) One wire 35.00 sq. mm 0.00 Mtr. 0.00 ₹

Subtotal Part-01 ₹

Part-02: Light Fixtures

DESCRIPTION QUANTITY UNIT AMOUNT

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

(A) LED Lamps integral type, with PC diffuser suitable

(b) 5 to 8 watts

39 CAT III 2.00 Each 112.11 ₹

Miniature circuit breaker single pole 0.5 A to 2A suitable to

operate on 240 V A.C. system and having overload and short

circuit tripping elements and breaking capacity 10 KA to be

erected in existing M.S. box confirming to IS 8828/1996 with

ISI mark. (For each Fitting) Cat.III

Supplying and erecting B class galvanised iron pipe 32 mm

outside dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm

thick M.S. base plate, erected on wall or corner for mounting

street light luminaire with necessary hardware materials duly

41 painted. 2.00 Nos. 343.40 ₹

Subtotal Part-02 ₹

Part-03 LT Switchgear, Distribution Boards & LT Panel

providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark .

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

43 following capacity ₹

44 (A) 6 to 32 Amp. Cat.III 85.00 Each 299.97 ₹

45 (B) 40 Amp. Cat.III 0.00 Each 330.27 ₹

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

46 (a) 6 to 32 Amp. Cat-III 1.00 Each 595.90 ₹

47 (b) 40 Amp. Cat-III 0.00 Each 668.62 ₹

48 (c) 63 Amp. Cat-III 0.00 Each 737.30 ₹

DESCRIPTION QUANTITY UNIT AMOUNT

Supplying & erecting approved make Electronics Starter

and relay for air conditioners in ABS plastic moulded

housing. Company fabricated with bakelite terminal for

connection with silver coating bimetallic contact in

switching device for o/p with following features.

(1) Low Voltage Protection below 130 V

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22

Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

Plastic enclosure fitted with DIN rail suitable for

50 incorporating One / Two nos. MCB 0.00 Each 52.52 ₹

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

52 (iii)8 way 2.00 Each 702.96 ₹

(A) single phase incoming and horizontal single phase

(a) single door (IP-30)

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(a) sheet steel single door

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(a) sheet steel single door

Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single

phase 240 V. having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

(i) 25 Amps.DP, Cat-III

58 (ii) 40Amps. DP, Cat-III 1.00 Each 2235.13 ₹

59 (iii) 63 Amps. DP, Cat-III 0.00 Each 2654.28 ₹

Subtotal Part-03 ₹

PART 04: Earthing System

Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp.

Providing and erecting Annealed bare Copper wire 8 to

DESCRIPTION QUANTITY UNIT AMOUNT

Providing & Erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried

in specially prepared earth pit complete with necessary 8 SWG

earth wire with using salt and charcoal / coke as required for pipe

type earthing. (for Each Shade)

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications

with chamber and heavy duty cover.(approved make OEM

has to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long

time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Subtotal Part-04 ₹

PART 05: LT Cables & Cable Termination

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(b) 4 core 6 Sq. Mm

Making trench in soft soil of suitable width of 90 cms deep

for laying cable or locating the fault all over the run and

backfilling the same and making the surface as normal

65 ground. 40.00 Mtr. 55.55 ₹

Providing & laying. R.C.C. hume pipe for cable to be laid

90 cms. below ground across the road crossing or on floor

with necessary material in an approved manner and

making the ground as per original.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

68 (C))90 mm outer dia 0.00 Mtr. 95.95 ₹

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

69 following size of cables. ₹

71 (c) 2 to 4 core 10 Sq. mm 0.00 Each 38.38 ₹

72 (d) 2 to 4 core 16 Sq. mm 0.00 Each 47.47 ₹

DESCRIPTION QUANTITY UNIT AMOUNT

73 (E) 2 to 4 core 25 Sq. mm 0.00 ₹

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

approved make of following Size.

79 (C) 3 Core x 4 Sq. mm 0.00 Mtr. 146.45 ₹

Subtotal Part-05 ₹

PART 06: Fan & Related Accessories

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cms. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

81 earthing. 2.00 Mtr. 108.07 ₹

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty

having following dia size and maximum speed in RPM

[B] 380 mm dia 900 RPM, Cat II

83 [D] 450 mm dia and 900 RPM. Cat.II 0.00 Each 3339.06 ₹

Providing suitable M.S. louver shutter of the Exhaust fan.

Supplying and erecting approved make double ball bearing

oscillating type Heavy duty bracket fan with Aluminium

Blades A.C. 23OV. 50cy/s wall mounted with height

adjustment and rotary tilting device complete with guard,

wall bracket,mounting accessories as directed.

Subtotal Part-06 ₹

PART 07: Motor & Starters

Supplying and erecting Direct - On - Line Starter with 18 A.

rating contactor and with 3.5 Amp. 18A range directly

operated in totally insulated elegant enclosure for single

phase operation up to 3 HP as per IS 13947 complete

erected on P.W. Block with necessary connection. cat III

(C) 1 H.P. single phase open well motor pump set suitable

for 185 LPM discharge @ 25 mtr. head, suitable for 32 mm

dia. Delivery pipe with control panel.

Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of

Engineer in charge on site complete with wiring connection

with existing wires , with copper conductor from pump to

upper and lower tank.

DESCRIPTION QUANTITY UNIT AMOUNT

Subtotal Part-07 ₹

TOTAL AMOUNT OF PART (D) : Internal Electrical ₹

TOTAL AMOUNT OF PART (D) : Internal Electrical ₹

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(A) PAVER BLOCK & VDS ROAD

Box Cutting the road surface to proper slope and camber

for making base includinng removing the excavated stuff

and depositing on the road side slope as directed up to

SMC SOR-PAGE NO 20 IT NO GD.1

Preparation of subgrade with compacting, Leveling and

consolidation of subgrade with miniroller/plate vibrator

2 machine including watering and filling in depression occur 3936.00 S.M. 4.93

the process as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.2

Providing & laying Granular Sub Base(GSB) confirming to

Grading V of Table 400.0 of compacted th. Of 150 mm with

specified graded stone metal and sand mixed in place and

laid with mechanical means spreading with motor grader

and compactiong with vibratory roller having miimum 80-

100 KN static weight to achieve desired dencity of 98 % of

MDD including all material, labour, machinery with all leads

and lifts etc. comp.

SMC SOR-PAGE NO 20 IT NO GD.9

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

4 Crushed stone agg 20m.m Nominal size) &curing comp. 372.00 C.M. 3005.76

excl. cost of form work in :(a) foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

providing and laying 200 micron plastic sheet on

5 prepared sub base as per instruction of Engg. In charge etc. 1500.00 S.M. 26.00

SMC SOR-PAGE NO 20 IT NO GD.12 MR

Supplying & filling fine sand (pana) in 75 mm /100 mm /

150mm compacted thickness over the base including

necessary compaction, watering etc. compacted. Item

includes levelling by using vibratory plates compacted

machine and as directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.4

Providing 100mm th. Ready made C.C. kerb of strength M-

20 (Size 300mm X 380mm) purchased from SMC's

approved paverblock manufacturer & setting in line level

and in truly vertical postion, including filling joints in C.M.

7 1:1 (1 part of cement : 1 part of stone dust ) smooth 255.00 R.MT 228.00

pointing in C.M. 1:1 ( 1 part of cement : 1 part of coarse

sand) including watering etc. complete and as directed by

engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.6 MR

Providing interlocking type Rubber moulding cement

concrete Paver Block of approved shape, design & colour

having 60 mm thickness (M-35) Purchased from S.M.C's

approved paverblock manufactures only & fixing on fine

sand bedding. Item includes leveling by using vibratory

plates compacted machine. Item also includes all materials,

labour, equipments, tools, plants, watering, cleaning etc.

With colour 1221.00 S.M. 524.00

Without colour 1221.00 S.M. 524.00

SMC SOR-PAGE NO 20 IT NO GD.7 MR

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

SMC SOR-PAGE NO 20 IT NO GD.3

Providing & filling in plinth with murrum or selected soil in

10 layers of 20 cm. Th'. Incl. watering, ramming & 1184.00 C.M. 289.06

consolidation etc. complete.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete Pavement using

1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm

11 nominal size) & Vaccuum Dewatering technique including

floating surface with a skim powder floater, curing etc.

Internal road 188.00 C.M. 5981.00

SMC SOR-PAGE NO 20 IT NO GD.10

Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of

12 1/3 of total thickness with filling of epoxy sealent as 175.00 R.MT 50.00

directed by engineer in charge

SMC SOR-PAGE NO 20 IT NO GD.13

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

13 for R.C.C. work incl. bending, binding & placing in position

Upto G.L./P.L. 8460.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Total amount of Paver Block & VDS Road

Total amount of Paver Block & VDS Road

(B) WATER SUPPLY & SANITARY

Providing and constructing simple chamber of 23cm. of

B.B. masonary wall in c.m. 1:5 incl. 15mm. thick cement

plaster in c.m 1:3 inside and out side to exposed faces R.C.C.

1 top slab with1:2:4 mix (1 cement : 2 sand : 4 grade ston 15.00 No 2932.93

aggregate 20mm size), foundation concrete 1:5:10 with

fixing Precast RCC. heavy duty cover on top etc. inside

dimension 455 x 610mm & 450mm deep for single pipe

SMC SOR-PAGE NO 7 IT NO

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe

2 in C.M 1:1 of following nominal internal diameters incl.

Testing of pipes and joints etc. Comp

(A) SMC SOR-PAGE NO 7 IT NO

(B) & (C) SMC DRAINGE SOR- 22-23

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand &

3 manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing C.P brass screw down bib tap at all

floor level polished bright etc. comp.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing gun metal check or non return full

way wheel valve at floor levels,etc. complete.

SMC SOR-PAGE NO 8 IT NO

Total amount of Plumbing & Sanitation

Total amount of Plumbing & Sanitation

(C) RECHARGE BORE WELL

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Drilling 300 mm diameter borewell in all types of strata up

to required depth including cost of bentonite powder,

carting rings, cutter, other required materials, labour

charges etc. complete. The drilling shall be done by mud

flushed rotary equipment and bore holes should withstand

1 at least till completion of subsequent activities like 41.18 R.M 857.00

assembly jointing, lowering of casing / strainer pipes,

gravels packing, yield testing etc, complete up to required

depth as shown in drawing

and directed by engineer –in- charge.

CE/HYD/01/2024-25 IT No

Supplying and filling clean best quality of well sorted - "

SEVALIYA" sorted pea gravel having size 6 mm to 10 mm in

layer of required thickness in filter chamber as per drawing

and as directed by Engineer –in- charge.

CE/HYD/01/2024-25 IT No

Providing and fitting bail plug having length 0.45mtr. from

M.S medium class pipe as per ISI for 200 mm diameter pipe.

Development of each water bearing zone come across up to

the depth of tube well (size 250 mm diameter & depth more

4 then 150 ft.) by lowering 100 mm diameter drop line and 3.00 4000.00

32 mm diameter GI air line for each Zone with air

compressor of capacity not less.

Providing & Fixing MS Clamps with threaded of standard

make suitable for ERW pipes.

(a) For 200 mm Diameter ERW blank pipe with size 750 x

75mm x 10mm thick suitable for 200mm diameter.

Excavation for foundation in and all kinds of soil including

leveling and ramming the bottom of trenches and

foundation pits, shoring, strutting, dewatering if required,

slush removing, filling the sides up to original ground level

for rectangular chamber and trench.

CE/HYD/01/2024-25 IT No

Providing and laying Cement Concrete M-100 grade 1:3:6 (1

cement: 3 coarse sand : 6 hand brocken stone aggregate

7 20mm nominal size ) and curing complete excluding cost of 1.86 C.M 3005.76

form work in chamber P.C.C(without forms work) work

complete. .( S.O.R.-2023-24

SOR 23-24 IT-05 PG-01

Providing & laying Fly ash Brick masonary having crushing

strength not less then 70kg/sq.cm. 1:6 (1 cement : 6 fine

8 sand) with scaffolding, watering, curing etc. complete with 4.41 C.M 4511.97

all labours and materials.various area as directed by

SOR 23-24 IT-16 PG-02

Providing 10mm thick Cement Plaster in single coat on

brick/concrete walls far interior plastering up to Floor two

level and finished even and smooth in cement morter 1:3(1

cement 3 sand various area as directed by incharge) .

SOR 23-24 IT-24 PG-03

Providing, fixing M.S Jali frammed work (three piece with

handle fitting) on Opening portion Precast Module

10 Structure for Prevention of Recharge bore well 93.00 Kg. 90.47

structure,size including framme, heavy required Angle (40

x 40 x 6mm), flat pati (25 x 6mm),cuttin

SOR 23-24 IT-98 PG-09

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low

Carbon Galvanise) 'V' wire screen pipe of Johnson or

11 approved make ISI including lowering, fixing, jointing in 36.00 R.M 2100.00

bore hole as per aquifer depth and pipe assembly given as

per site condition Soil stat

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C

Pipe of approved Quality (Prince,Suprem,Finolex) with ISI

12 mark including nesessary fittings and providing as per site 81.00 R.M 850.00

sitution and directed by Engineer –in- charge. (

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS

stanadard for down take / inlet from Bldg./ Structure to

13 Sand filter Chamber, including piping/ plumbing, fitting,

wall clamping, necessary excavation and filling etc.

complete as per site situation

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 10.50 R.M 325.00

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 30.00 R.M 525.00

Providing, supplying, fixing and installing M 300 Grade.

precast size 1.5 dia x 2.35 mt. height ,top 75mm thick in

14 half pieces Sand Filteration chamber (2 layer Type of

Precast module )as per Design, Drawing.including

necessary excavation, filling, dr

(a) 1 layer type of Precast module 0.00 NO. 18500.00 -

(b) 2 layer Type of Precast module 3.00 NO. 25000.00

Proving & fixing in position Johnson make and equivalent ...

'V' wire L.C.G screen pipe 1.00 mm size of filter assembly of

15 pair –ID 205mm & OD 217.50mm of 0.5mm slot size and ID

416 mm and OD 428 mm of 1.00mm slot size as per site

(a) 1.0 mt. length. 0.00 SET 7500.00 -

(b) 2.0 mt. Length. 3.00 SET 14000.00

Borehole Video photography all the fresh new fresh new

bores or few selected as desired for better understanding &

clarity of work undertaken as directed by Engineer -in-

Supplying water tankers for constant water supply at tube

well Compressor work and cleaning of work site after

completion of entire job (testing) inluding cleaning of mud

etc.Location as directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as

per standard I.R.C type design of steel plate including

painting lettering etc. complete with fixing in C.C 1:4:8 block

with necessary excavation.

Soil Investigation Test report from Govt.approved

authorised laboratary (Prior inserting bore Pipe) of each

19 bore shall be submitted by Contractor and soil sample of 3.00 6000.00

various starta shall be first collected in Polythene bag and

than submitted in transparent

Removal of surplus excavated earth of excavated mud-pits

20 and water harvesting chambers up to the lead of 5.0 km as 3.60 C.M 65.00

per the instruction of Engineer In Charge

Total amount of Recharge Bore Well

Total amount of Recharge Bore Well

(D) COMPOUND WALL & MAIN GATE

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

for 250 mm dia 798.00 R.M 326.84

for 300 mm dia 12.00 R.M 391.74

SMC SOR-PAGE NO 9 IT NO

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 77.00 C.M. 117.26

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:4:8 (1 cement:4

3 coarse sand:8 gradedstone agg. 40 mm nominal size) &

curing comp. excl.cost of form work in

(A) Foundation and plinth 19.00 C.M. 2680.21

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size)& curing

4 comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in

(A) foundation, footing, base of columns and mass

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal

5 size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 59.00 C.M. 9102.61

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

upto G.L./P.L. 0.00 C.M. 8174.41

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal

6 size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in

(1) Having c/s area up to 0.08 sq.mt. 0.00 C.M. 12632.60

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone

7 agg. 20 mm nominal size) & curing complete including cost 0.00 C.M. 3982.62 -

of formwork in wall caps & copping.

SMC SOR-PAGE NO 9 IT NO

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

8 exceeding 20 cm. in depth consolidating each disposited 337.00 C.M. 130.39

layer by ramming and watering.

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

9 for R.C.C. workincl. bending, binding & placing in position

Upto G.L./P.L. 14670.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal size)

10 finishing smooth curing etc. comp. Incld. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in : Up to

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(1)Having c/s area up to 0.08 s.mt 10.00 C.M 12632.60

(2) Having c/s area more than 0.08 sq. mt. & upto

(1)Having c/s area up to 0.08 s.mt 0.00 C.M 9102.61

(2) Having c/s area more than 0.08 sq. mt. & upto

(C) VERTICAL FINS 50.00 C.M 10831.75

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

11 for R.C.C. workincl. bending, binding & placing in position

Upto G.L./P.L. 1850.00 Kg. 76.21

SMC SOR-PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having

crushing strengthnot less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

At ground floor 1.00 C.M. 4511.97

SMC SOR-PAGE NO 2 IT NO

Half brick masonry in common brunt clay building bricks

having crushingstrength not less than 35 Kg/Sq.Cm. in

13 Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

At ground floor 0.00 S.M. 625.53

SMC SOR-PAGE NO 2 IT NO

Providing & Applying 10mm.th.cement plaster in single

coat on brick/concrete walls similar surfaces for plastering

& finished even & smooth with afloating coat of cement

slurry mixed with admixture of lime or neeru inrequired

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 S.M. 189.79

(B) For ceilings & soffits

At Ground Floor 0.00 S.M. 214.60

SMC SOR-PAGE NO 3 IT NO

20mm thick sand faced cement plaster on walls for height

more than 10 metres above ground level consisting of

15 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand)

and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

At Ground Floor 684.00 S.M. 330.88

SMC SOR-PAGE NO 3 IT NO

Providing throating or plaster drip and moulding it to

R.C.C. chajja etc. comp.. For all floor

At Ground Floor 0.00 R.M. 41.66

SMC SOR-PAGE NO 3 IT NO

17 Pro. smooth plaster patta

At Ground Floor 2299.00 R.M. 27.27

Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

At Ground Floor 1329.00 R.M. 50.00

SMC SOR-PAGE NO 3 IT NO

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and

free from all loose dirt, chalk, grease, fungi, algae and

19 flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint

(A) For wall 684.00 S.M 82.00

SMC SOR- COLOUR WORK PAGE NO 16 IT NO

M.S. Gate Steel work welded in built up sections,frame

20 work including cutting, hoisting, fixing in position and

applying apriming coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with

connection plats or angle cleats as in main and cross beams,

hip and trussed purlins connected to common raffers and

Ground Floor 9.50 Qtl 9047.86

(SOR SMC It No. 98A)

Steel work welded in built up sections,frame work

21 including cutting, hoisting, fixing in position and applying

apriming coat of red lead paint :-

(B)For work like chain link fencing, above compound

Ground Floor 64.40 Qtl 9047.86

(SOR SMC It No. 98A)

Providing & fixing M.S. Grills of required pattern to

wooden frames of windows etc. at all floor levels with M.S.

flats at required spacing & frame around square or round

22 bars with round headed bolts & round headed bolts and

nuts or by screws incl. Priming coat of Red lead paint etc.

comp. (A) Plain Grill For all floors

All Floor 0.00 KG. 104.20 -

SMC SOR-PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

23 burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

Ground Floor 578.00 S.M. 65.31

SMC SOR- COLOUR WORK PAGE NO 15 IT NO

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing, supplying and fixing of MS angles 50X50X5 mm

over existing compound wall (for laying Concertina coil &

barbed wire fencing) as per approved design "Y" shape,

drawing including fabrication, cutting, welding, to required

pattern, making holes, etc. complete with one coat primer

and two coats of synthetic enamel paints of approved

manufacture, colour, brand and shade, cost of materials,

fixtures, necessary accessories scaffolding, tools n tackles,

labours, transportation at all heights and levels as directed

24 by engineer incharge. Note 1) dismantling of existing 0.00 Qtl 9047.86 -

compound wall of BBM/SSM for fixing of MS angles. 2)

providing and laying of M-15 grade concrete (size of

concrete required up to 300x300x300mm minimum) for

fixing og MS angles. (price to be quoted inclusive of

concrete works incluidng shuttering supports and chipping

along with MS angles works and carting away the debris)

(SOR SMC It No. 98A)

Providing and fixing hot dip Concertina Coil of 610 mm dia.

made out of 2.59mm (12 SWG) hot dip galvenized (G.I.

coating not less than 200 gm/sq.m) th. wire having 80 nos.

of spikes and 200 nos. of clip made out of stainless steel

(AISI 304)1.5 mm th. dia., G.I. Strips 0.5 mm th. (G.I. coating

25 not less than 120 gm/sq.m) weight of one coil should not be 0.00 R.M. 231.00

less them 15 kg etc complit, at the top of compound wall

fixed with S.S. clips and binding wires wherever mecessary

etc.complit.( Note:- Stretching

length of one coil should not be more than 9 mt.)

AS PER TENDER DMC/SZ-B/01/2024-25

Providing and fixing and fitting TATA or equivalent make

G.I barbed wire fencing with necessary barbed wire (12 x

26 14 guage, weight not less than 0.14 kg/mt) pins,hooks 0.00 Kg. 125.00 -

excluding M.S. angles etc. complete as per relevant IS

specification & directed b

(SOR SMC It No. 100, Pg-09)

Total amount for Comp. Wall & Entry Gate

Total amount for Comp. Wall & Entry Gate

(E) PARKING SHED

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto 50 mt.

1 Lead & all lift, watering etc.Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or soft soil

(1) Up to 1.5 Mt. depth 317.00 C.M 117.26

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size)&curing comp. excl.

cost of form work in :(a) foundation

(A) Foundation 32.00 C.M 3005.76

SMC SOR-PAGE NO 1 IT NO

providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement.-(A) foundation, footing, base of columns

and mass concrete

SMC SOR-PAGE NO 14 MIX DESIGN

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 design mix concrete as per IS 456:2000

4 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement. work in : Upto G.L./P.L.

(2) Having cross sectional area more than 0.085 sq. mt.up to

SMC SOR-PAGE NO 14 MIX DESIGN

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

5 R.C.C. work incl. bending, binding & placing in position etc. 10335.00 Kg 76.21

comp. Upto G.L./P.L

SMC SOR, ITEM NO.-

WORK ABOVE PLINTH LEVEL

Steel work welded in built up sections,frame work including

cutting, hoisting, fixing in position and applying apriming coat

of red lead paint :-

6 (A) In beams and joists channels angles, tees, flats with

connection plats or angle cleats as in main and cross beams,

hip and trussed purlins connected to common raffers and the

SMC SOR-PAGE NO 9 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

SMC SOR-PAGE NO 15 IT NO

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

8 grom J or L hook bolts and bolt 8mm dia with bituman and 970.00 S.M. 999.00

impet washer filled with white lead etc. Excluding the cost of

purlins rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR-PAGE NO 9 IT NO

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

9 size bolts, nuts, washers etc. including marking necessary 1000.00 S.M. 412.00

connection with rain water pipes. (i) 0.63mm thick

SMC SOR-PAGE NO 9 IT NO 106 MR

Total amount of Parking Shed A+B

Total amount of Parking Shed A+B

LAWN : Area cleaning and side grading, removing unwanted

materials, plants, chrubs,wild grass, weeds,debris,rubbish,etc.

Excavating up to depth 30 C.M surface dressing leveling,

making slopes for drainage according to landscape, Disposal of

unwanted materials with all labour and tools. Development of

lawn including preparation of bed ground, spreading and

mixing the good soil with Farm Yard Manure, Gypsum,

fertilizer soil with farm Yard Manure, Gypsum, Fertilizer bas

required hand specified. Planting of lawn grass bits roots of

approved quality, watering and specified. Planting of lawn

grass bits roots of approved quality, watering, and specified.

Planting of lawn grass watering mowing, weeding etc.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Supplying on site plants with following specifications . Plants

would be in good condition and of specified height. The rates

would be inclusive of all taxes, sales tax, Octroi,transportaion

etc. complete F.O.R. site. Conditions of plant would be verified

at the time of selction as well delivery. All complete and as per

instructions of the Engineer-in-charge.

Lagerstroemia thorell II - 3.66m ht 10.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 15.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 10.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. Nos. 75.00 -

Nephrolepis exalotta smithi - 0.45x0.30m 10.00 Nos. 20.00

Champa - 3.66m ht. 10.00 Nos. 270.00

Total amount of garden

Total amount of garden

PART : External Electrical Works

Sr. Description of Work/ Item Qty Unit Cess

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm

O.D 6 mtr. Long duly painted with two coats of aluminium paint

complete with metallic base- plate of 300 mm x 300 mm x 4mm

thick for using as a compound light pole with approx. weight

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x

cm. Deep in below ground level with plinth of 45 cm x 45 cm (or

45 cm dia x 45 cm) high upper ground level with necessary

curing and finishing in approved manner.

Supplying and erecting Street light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with

suitable B Class G.I. sleeve tubing of approx. 45cms.length and

suitable for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having spread of

mtr. Length with 110 deg.with vertical plane and suitable

welded stiffener reducer and nipple with check nut complete

painted with one coat.of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of

[A] Single Arm bracket 1 Mtr 10.00 Nos. 561.56 ₹

[B] Double Arm Bracket 1 Mtr 0.00 Nos. 758.51 ₹

[C] Three Arm Bracket 1 Mtr 0.00 Nos. 955.46 ₹

90 [D] Four Arm Bracket 1 Mtr 0.00 Nos. 1144.33 ₹

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with bakelite connector strip 5way (3P+N+E) & hinged

doors having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT

Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt .

LED driver efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. ( Each

fittings required LM-79 & LM-80 certificates)

(A) Street Light (IP-65), Surge -4KV(Internal) & 10KV

92 (i) above 36 watts to 48 watts Cat-III 10.00 Nos. 3345.12 ₹

(B) Flood Light (IP-65), Surge -4KV

93 (d) above 90 W to 120 watts Cat-III 1.00 Nos. 7266.95 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following

Supplying & erecting Flexible PVC insulated multistrand

multicore 1.1 KV grade ISI marked Copper Wires of following

Size to be erected as directed.

95 h) 2.5 Sq.mm 3 core round PVC sheathed 58.00 Mtr. 77.77 ₹

Making trench in soft soil of suitable width of 90 cm deep for

laying cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of

90 cm or required depth for laying any size of cable or locating

the fault all over the run and back filling the same and making

105 the surface as normal ground. 0.00 Mtr. 74.74 ₹

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for

enclosing cable and back filling the same to make ground as per

106 (A) Outer dia. 50 mm 270.00 Mtr. 62.62 ₹

Cable Termination

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Providing & Erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried

in specially prepared earth pit complete with necessary 8 SWG

earth wire with using salt and charcoal / coke as required for

109 pipe type earthing. 10.00 Nos. 540.35 ₹

Miniature circuit breaker single pole 0.5 A to 2A suitable to

operate on 240 V A.C. system and having overload and short

circuit tripping elements and breaking capacity 10 KA to be

erected in existing M.S. box confirming to IS 8828/1996 with ISI

110 mark. (For each Fitting) Cat.III 10.00 Nos. 270.68 ₹

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Supplying and erecting B class galvanised iron pipe 32 mm

outside dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm

thick M.S. base plate, erected on wall or corner for mounting

street light luminaire with necessary hardware materials duly

111 painted. 2.00 Nos. 343.40 ₹

Total of External Electrical Works ₹

Total Tender amount ₹