Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC | ₹2.3 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.4 L+₹9,940.25 (4.36%)Rejected-Finance | ₹2.4 L+₹9,940.25 (4.36%) | L2 | Rejected-Finance Rejected (Highest) |
| 3 | L3₹2.7 L+₹43,078 (18.9%)Rejected-Finance | ₹2.7 L+₹43,078 (18.9%) | L3 | Rejected-Finance Rejected (Highest) |
| Sl No | Description | Qty | Unit | Nikhil sharma govt.contractor L1 | MAYANK JASWAL GOVT CONTRACTOR L3 | SANJEEV SINGH L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations in trenches in earth work in pick work, jumper work with ini all leads and lifts stacking the excavated soil not more than 3 mts clear from the edge of the excavation & then returing the stacked soil in 15 cms. Layers when required into plinths sides of foundation etc. consolidation each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected with inall leads & lifts as per entire satisfaction of Engineer-in-charge | 328.05 | P/cum | 220 ₹72,171 | 180 ₹59,049 Lowest | 225 ₹73,811.25 |
| 2.00Electric welding with superior quality rod of GI pipes at various points to stop the leakage including cutitng of pipe if required and making alignment as per site requirement of following dia within all leads and lifts as per direction of Engineer-in-charge | ||||||
| 2.01 | 25mm dia | 80 | Per/joints | 180 ₹14,400 | 250 ₹20,000 | 100 ₹8,000 Lowest |
| 2.02 | 32mm dia | 60 | Per/joints | 210 ₹12,600 | 260 ₹15,600 | 200 ₹12,000 Lowest |
| 2.03 | 40mm dia | 70 | Per/joints | 250 ₹17,500 Lowest | 300 ₹21,000 | 300 ₹21,000 |
| 2.04 | 50mm dia | 40 | Per/joints | 300 ₹12,000 Lowest | 320 ₹12,800 | 400 ₹16,000 |
| 2.05 | 65mm dia | 60 | Per/joints | 320 ₹19,200 Lowest | 400 ₹24,000 | 500 ₹30,000 |
| 3.00Cutting and welding of gravity main pipe line of various dia including carriage of welding set at site of work complete in all respect | ||||||
| 3.01 | 40mm dia | 55 | Per/joints | 230 ₹12,650 | 400 ₹22,000 | 200 ₹11,000 Lowest |
| 3.02 | 50mm dia | 70 | Per/joints | 250 ₹17,500 Lowest | 500 ₹35,000 | 300 ₹21,000 |
Tender Value
₹3.2 L
EMD Value
₹6,467
Closing Date
9 Mar 2026, 11:00 amClosed
EXECUTIVE ENGINEER
JSV Divn Indora
Repair of damage G.I. pipe including welding and replacement of existing distribution lines along the road due to widing of roads under section Mangwal)
2026_HPIPH_130014_1
EE-JSV-IND-NIT-6501-25 dated 28-02-2026
Open Tender
Civil Works
Item Rate
Indora
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹6,467
20 Jun 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
Excavation in foundations in trenches in earth work in pick work, jumper work with ini all leads and lifts stacking the excavated soil not more than 3 mts clear from the edge of the excavation & then returing the stacked soil in 15 cms. Layers when required into plinths sides of foundation etc. consolidation each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected with inall leads & lifts as per entire satisfaction of Engineer-in-charge
Electric welding with superior quality rod of GI pipes at various points to stop the leakage including cutitng of pipe if required and making alignment as per site requirement of following dia within all leads and lifts as per direction of Engineer-in-charge
25mm dia
32mm dia
40mm dia
50mm dia
65mm dia
Cutting and welding of gravity main pipe line of various dia including carriage of welding set at site of work complete in all respect
40mm dia
50mm dia
65mm dia
Providing and fixing MS flanges Table-5 confirming to BIS-6392-1971 latest with up to date amendsments including nuts and bolts and 3mm thick rubber gasket. Flanges to be welded with double layer on outer side and single layer on inner side as per BIS: 816-1965 latest with up to date amendsment including all leads and lifts of materials as per the direction of Engineer-in-charge of following nominal bore
50mm dia
65mm dia
Manufacturing and fixing of MS bend including cost of cutting of pipe & welding of pipe of required degree at site complete in all respect with in all leads and lifts
40mm dia
50mm dia
65mm dia
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.95 MB
forms.pdf
Tender Documents • 1.64 MB
terms.pdf
Additional Documents • 0.01 MB
BOQ_192200.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .