Loading
Loading…
Loading…
Tender ID
Tender Value
Refer Docs
EMD Value
₹50 L
Closing Date
30 Jun 2026, 2:30 pmClosed
Single Packet
Normal Tender
Yes
Total Value Wise
Lowest to Highest
Please see item details
Not Applicable
Expenditure
General
02
5 conditions · 5 needing a document upload
As per Para 3.0 of Schedule of Requirement (attached)
Bidder to submit Financial capacity as per Annexure -1 of Schedule of Requirement.
Bidder to submit Technical capacity for Propulsion Equipments as per Annexure -2 of Schedule of Requirement.
Bidder to submit clause by clause compliance of RCF specification No. EDTS-449 (Rev.-00), Rev-Nil as per schedule of requirement.
Bidder shall submit the relevant past supply performance of tendered item i.e., 'Set of electrics of EMU/MEMU/Metro coaches in the last five years as on the date of tender opening. Bidder shall also submit cancellation of Purchase order on account of poor supply performance, if any, by RCF/ICF/MCF or any zonal Railways during last 5 years from the date of tender opening.
39 conditions · 12 needing a document upload
Public Procurement (Preference to Make in India) policy is applicable as per Clause 2.28 of RCF Bid document attached with tender. The procurement shall be done in accordance with the extant instruction of DPIIT (Department of Promotion of Industry and Internal Trade) for Make in India policy.
As per Public procurement (Preference to Make in India) order 2017, as amended, Ministry of Railways has notified that there is sufficient local capacity and competition in supply of the tendered item in required quality and therefore public procurement of this item is restricted to Class-I Local Suppliers (having minimum local content of 60%) only and the vendors who do not qualify to be Class-I Local Suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class-I Local Suppliers for the tendered item participates in the tender, it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
Local Content Certificate: "Make in India Policy" Bidders are mandatorily required to provide a certificate from the statutory auditor or cost accountant (in case of companies) or from a practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content. For verification of local content, bidders shall submit certificate from authority as prescribed in clause No. 2.28.3 (b) of the Bid Document. The certificate should have the details of tendered tem, tender number, opening date/closing date/Publishing date, details of the firm, local content percentage and UDIN (Unique Document Identification number). The certificate should be issued after the date of publication of the tender. Please note that offers received without this certificate is liable to be rejected. In case offers are submitted by agents on behalf of the Original Equipment Manufacturer (OEM), then he certificate should be provided for the OEM and not for the agent. In the absence of the certificate in the name of OEM, the offer is liable to be rejected without any back reference.
"Make in India Policy" Purchaser reserves the right to call for fresh local content certificate where either local content certificate has not been enclosed or is not fully compliant, in case of technically suitable offers. Fresh local content certificate shall only be considered for the purpose of correction of format/technical errors but will not be entertained for change of class of suppliers or any way affecting the eligibility of the tenderer. Fresh local content certificate shall be called for only when the tenderer has indicated their local content in their original offer. This being Government of India policy directive to be followed mandatorily, only the tenderers whose offers are techno commercially suitable and who qualify to be class-I local suppliers (having minimum local content of 50%) shall only be eligible for further process of evaluation as per tender conditions.
In case of MSE firm willing to claim the benefits under Public Procurement Policy (Preference to MSE) order 2012, the firm should upload with their offer, the proof of their being MSE registered with the agency mentioned in clause 1.15 of RCF Bid document failing which such offers will not be liable for consideration of benefits. Tenderers shall upload Udyam Registration detail showing that the enterprise is owned by Scheduled Castes (SC)/ Scheduled Tribes (ST)/ women entrepreneurs to claim the benefit under this sub- classification.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The eligibility for a bidder from a country which shares a land border with India to participate in the tender shall be as per Public Procurement Orders of Ministry of Finance, Department of Expenditure. Please refer Clause 2.28.9 of RCF Bid Document attached with tender. In this regards I certify that: " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries as per Public Procurement order issued by Ministry of Finance OM No. F.No. 6/18/2019-PPD dated 23.07.2020, Public Procurement order no. 1 & 2 vide letter. no. F.No.6/18/2019-PPD dated 23.07.2020 and Public Procurement order no. 3 vide letter. no. F.No.6/18/2019-PPD dated 24.07.2020 forwarded by Rly. Bd. Letter No. 2020/RS (G)/779/2 dated 06.08.2020. RB letter no. 2020/RS(L)/779/2 dated 19.03.2021 and RB letter no. 2020/RS(G)/779/2 - Part-I dated. 17.05.2021. I have also read the relevant clauses regarding submission of false certificates. I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not outsource any item to a sub-vendor from such countries unless such sub- vendors are registered with the competent authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)" Note: (1) If no valid registration by the Competent Authority is enclosed, then it will be presumed that bidder is not from such a country. (2) If a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law.
Tenderers are advised to refer HSN codes for each item while quoting the tender. The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote correct HSN code. The bidders should quote the HSN codes and upload the document.
It is certified that the item offered meets the local content requirement for "class-I local supplier only". Please submit the details of the location at which the local value additions is being made.
It will be presumed that the firms who have submitted the e- bid have gone through and accepted all the terms and conditions of tender, until and unless firms specify the deviations from those conditions and so indicated specifically, under the headings - "Technical Deviation Statement" and "Commercial Deviation Statements". And if space available is not adequate, tenderers can upload a Statement of Deviations and a reference of uploaded deviation statement shall be given in "Technical or Commercial Deviation Statement". If there is any contradiction between any techno commercial terms and conditions quoted in e-offer and documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail over that of quoted in attached documents. Tenderers in their own interest are advised not to quote any techno commercial terms & conditions in attached documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
Price Variation Clause: No deviation from the Price Variation Clause stipulated in the Schedule of Requirement is permitted.
Pre Bid : A Pre-Bid conference will be held on 19.05.2026 at 11.00 Hrs in the Conference Hall at the Administrative Building, Rail Coach Factory, Kapurthala.
QUANTITY SPLITING : As per Cause No. 2.17.2 of Bid Document Version 14.0 OR Latest with all Corrigendums/Amendments if any issued before closing of tender shall be applicable.
Bidder requiring any clarification of the bid documents may notify the Purchaser in writing or through email to [email protected] at least 7days in advance of Pre-Bid meeting addressing to Principal Chief Materials Manager, Rail Coach Factory, Kapurthala-144 602. (Tele fax No.0182-2227787)
2 locations across Punjab · 329 Set · 20 Numbers total
Three phase propulsion equipment and control system for BG High Speed Self- Propelled Inspection Car (HS-SPIC)
02261166
02261166
Open - Indigenous
(Goods/Service/AMC)
Punjab
₹0
₹50 L
30 Jun 2026
2 May 2026
31 items · 329 Set · 20 Numbers total
TRACTION TRANSFORMER FOR HS-SPIC WITH REQUIRED NUMBER OF SECONDARY TRAC TION WINDINGS ALONG WITH PROTECTION EQUIPMENT, SAFETY CHAIN ARRANGEMENT AND HT CABLE WITH PROTECTION SHIELD INCLUDING TERMINATION CRIMPING LUGS, CABLE MARKERS WITH HEAT SH RINKABLE SLEEVES FOR POWER AND CONTROL CABLES, MATING CONNECTORS, EQUIPMENT MOUNTIN G AND EARTHING HARDWARE AND ACCESSORIES INCLUDING AUXILIARY MACHINES SUCH AS OIL PUM P, OIL COOLING BLOWERS AS PER CLAUSE 4.3 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196- 2019 (REV.0) ALONG WITH MOUNTING HARDWARE (ONE SET PER HS-SPIC)., as per Drawing: AS PER C LAUSE 4.3 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instruction: S UITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.T HE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE ST ENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AV AILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
SET OF METAL OXIDE GAPLESS LIGHTNING ARRESTORS FOR HS-SPIC (02 NOS.) FOR 25 KV AC AS PER CLAUSE 4.4 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET PER HS-SPIC). NOTE: QUANTITY INCLUDES 04 SETS AS SPARES., as per Drawing: AS PER CLAUSE 4 .4 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATE RIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/ LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PR OVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAI LS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER < PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITE MS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TA GS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 14.00 Set |
| Total | 14 Set | |
CURRENT TRANSFORMER AND POTENTIAL TRANSFORMER FOR 25 KV AC FOR VCB FOR HS-SPIC AS PER CLAUSE 4.1.1 (II) & 4.3 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 ( REV.0) (ONE SET PER HS-SPIC). NOTE: QUANTITY INCLUDES 04 SETS AS SPARES., as per Drawing: AS P ER CLAUSE 4.1.1 (II) & 4.3 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packi ng Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKI NG SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESC RIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FI RMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PUR CHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR L OT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MAN UFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DEL CHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 14.00 Set |
| Total | 14 Set | |
VCB WITH EARTHING SWITCH FOR TRACTION CIRCUIT PROTECTION FOR HS-SPIC AS PER CLAUSE 4.27 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET PER HS- SPIC). NOTE: QUANTITY INCLUDES 04 SET AS SPARES., as per Drawing: AS PER CLAUSE 4.27 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USE D FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/ SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LIST ED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C) PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF TH E MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVER YCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 14.00 Set |
| Total | 14 Set | |
ON-BOARD MOUNTED IGBT BASED PWM TRACTION CONVERTER FOR HS-SPIC INCLUDING DC LINK WITH 100 HZ RESONANCE FILTER, BRAKE CHOPPER RESISTOR, DC LINK EARTHING SWITCH, PRE-CHARGING RESISTERS AND CONTACTORS AND/OR ANY OTHER EQUIPMENT NECESSARY T O REDUCE THE EFFECT OF OTHER HARMONICS ON S&T EQUIPMENT INCLUDING TERMINATION CRIMPIN G LUGS, CABLE MARKERS WITH HEAT SHRINKABLE SLEEVES FOR POWER AND CONTROL CABLES, MATI NG CONNECTORS, EQUIPMENT MOUNTING, EARTHING HARDWARE AND ACCESSORIES INCLUDING AUXILIARY MACHINES AS REQUIRED AS PER CLAUSE 4.5 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/E MU/0196-2019 (REV. 0) AND AUXILIARY MACHINES AS REQUIRED.ACCESS TO CONVERTER SHALL BE T HROUGH HT INTERLOCKS WHICH SHALL BE IN SUPPLIER'S SCOPE. (ONE SET PER HS-SPIC), as per Draw ing: As per clause 4.5 of RDSO Specification No. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instr uction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOOD EN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHA LL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HA VE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CO DE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASE ORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NU MBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACT URE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALD T> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
THREE-PHASE FULLY SUSPENDED ASYNCHRONOUS INDUCTION MOTORS FOR HS-SPIC C OMPATIBLE WITH IGBT BASED TRACTION CONVERTER POWER SUPPLY, WITH COUPLING, GEAR BOX AS SEMBLY, SENSORS AND ASSOCIATED EQUIPMENT INCLUDING TERMINATION CRIMPING LUGS, CABLE M ARKERS WITH HEAT SHRINKABLE SLEEVES FOR POWER AND CONTROL CABLES, MATING CONNECTORS , EQUIPMENT MOUNTING AND EARTHING HARDWARE AND ACCESSORIES AS PER CLAUSE 4.6 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0)(1 SET CONSISTS OF ONE TM & ACCESSORI ES) . NOTE -QUANTITY INCLUDES 4 SETS AS SPARES., as per Drawing: AS PER CLAUSE 4.6 OF RDSO SP ECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019(REV.0), Packing Instruction: SUITABLY COVERED WIT H BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FO R PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HAN DLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPE C NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CO DE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PU RCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERY CHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE A S PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILE D ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 44.00 Set |
| Total | 44 Set | |
MICROPROCESSOR BASED TRAIN CONTROL AND MANAGEMENT SYSTEM(TCMS)/VEHICLE CONTROL UNIT(VCU) FOR HS-SPIC WITH BRAKE INTERFACE UNIT INCLUDING FAULT DIAGNOSIS AND DI SPLAY SYSTEM IN THE DRIVING CAB AND MULTIPLEXING SYSTEM FOR RELEVANT CONTROL AND OTHE R SIGNALS (AS PER CLAUSE 4.9 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), WHEEL SLIP/SLIDE PROTECTION AND ANTI-SKID CONTROLS AS PER CLAUSE 4.24 OF RDSO SPECIFICATI ON NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), INCLUDING INTEGRATION WITH TCMS FOR BRAKE SYS TEM, AS PER CLAUSE 4.1.1 (XIII) OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET PER HS-SPIC). FOLLOWING ITEMS SHALL ALSO BE SUPPLIED: (1) EVENT RECORDER FOR HS-S PIC AS PER CLAUSE 4.10 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE S ET PER HS-SPIC) (2) SPEED INDICATING CUM RECORDING EQUIPMENT FOR HS-SPIC AS PER CLAUSE 4.2 0 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET PER HS-SPIC). (3) SE T OF CONTROL EQUIPMENT FOR HS-SPIC SUCH AS RELAYS, CONTACTORS, CIRCUIT BREAKERS AND RELATED SWITCHGEARS ETC. FOR PROPULSION SYSTEM, CONTROLS AND AUXILIARIES IN THE ASSEMB LED FORM VIZ. CUBICLE OR CABINET AS PER CLAUSE 4.22 OF RDSO SPECIFICATION NO. RDSO/PE/SPE C/EMU/0196-2019 (REV.0). (ONE SET PER HS-SPIC) (4) 750 VA INVERTER ALONG WITH CONTACTORS, C IRCUIT BREAKERS AND RELATED SWITCHGEARS ETC AS PER ICF/ELECT/172. (ONE SET PER HS-SPIC) (5 ) PRE WIRED PUMP CONTROLLER AND MCB PANEL AS PER DRAWING NO. TRAIN18/TC/AC-7-5-003.(ONE SET PER HS-SPIC) (6) LOAD WEIGHING SYSTEM FOR HS-SPIC INCLUDING REDUNDANT WEIGHT SENSOR S AT BOGIE LEVEL, JUNCTION BOXES FOR INTERFACING CABLES, MATING CONNECTORS, SS HARDWAR E, CABLE MARKERS AND CRIMP CONTACTS. THE SCOPE OF SUPPLY OF PRESSURE TRANSDUCERS SHAL L BE WITH SUPPLIER AS PER CLAUSE 4.26 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-201 9 (REV.0). (ONE SET PER HS-SPIC)., as per Drawing: AS PER CLAUSE 4.9, 4.24, 4.1.1(XIII), 4.10, 4.20, 4. 22 AND 4.26 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0) AND 750VA INVERT ER AS PER ICF/ELECT/172., Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPAR ENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHAL L BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DA TE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MAN UFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT > D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO >OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Wa rranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
PAPIS COMPRISING OF FRONT DESTINATION BOARD (HEAD CODE ON BOTH ENDS), AUDI O COMMUNICATION SYSTEM INCLUDING SPEAKERS (6 NOS.), FLUSH MOUNTED ALARM PUSH BUTTON MECHANISM WITH INTEGRATED DUAL LEDS INCLUDING POLYCARBONATE ENCLOSURE (4 NOS.), EXTER NAL FLUSH MOUNTED LED BASED PASSENGER ALARM INDICATOR (1 NO. ON EACH SIDE OF HS-SPIC), R ETRACTABLE DISPLAYS(04 NOS. OF SIZE 18.5 INCHES) AS PER CLAUSE 4.11 OF RDSO SPECIFICATION N O. RDSO/PE/SPEC/EMU/0196-2019 (REV.0).(ONE SET PER HS-SPIC), as per Drawing: As per clause 4.11 of RDSO Specification No. RDSO/PE/SPEC/EMU/0196-2019 (Rev.0), Packing Instruction: SUITABLY COVE RED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABE LED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVI DE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PO NO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEM S) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F )DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE S HALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAG S DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
PASSENGER CAR SURVEILLANCE SYSTEM FOR HS-SPIC AS MENTIONED IN CLAUSE 4.13 OF RDSO/PE/SPEC/EMU/0196-2019 (REV.0). THE CCTV SURVEILLANCE SYSTEM SHALL BE AS PER SPECI FICATION RDSO/SPN/TC/106/2022, VER-2.1 HOWEVER, THE NUMBER OF CAMERAS SHALL BE PROVIDE D AS SHOWN IN THE LAYOUT DRG. NO. SP90001 TO COVER ENTIRE COACH AREA WITH NO BLIND SPO TS INCLUDING DOORWAYS, GANGWAYS AND SALOON AREA. ADDITIONALY, AT LEAST ONE CAMERA SH ALL BE PLACED IN DRIVING CAB FOR GATHERING FRONT END VIEW, TRACK AND OHE CONDITIONS ETC , PLATFORM VIEW CAMERAS SHALL BE PROVIDED. ONE CAMERA SHALL BE INSTALLED ON THE ROOF F ACING TOWARDS PANTOGRAPH TO MONITOR THE ROOF EQUIPMENTS. , FRONT CAMERA AND PANTO V IEWING CAMERA SHALL ALSO BE PROVIDED. (ONE SET PER HS-SPIC)., as per Drawing: PASSENGER CA R SURVEILLANCE SYSTEM FOR HS-SPIC AS MENTIONED IN CLAUSE 4.13 OF RDSO/PE/SPEC/EMU/0196-2 019 (REV.0). THE CCTV SURVEILLANCE SYSTEM SHALL BE AS PER SPECIFICATION RDSO/SPN/TC/106/20 22, VER-2.1, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME , ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARD BOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACT URER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UN IQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR < MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DEL IVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND T HE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 M onths after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
COMPLETE PRE-FABRICATED DRIVER DESK ON BOTH ENDS OF HS-SPIC HOUSING ALL TH E NECESSARY EQUIPMENT AND DRIVER/ GUARD SEAT, MASTER CUM BRAKE CONTROLLER, DRIVER CO NTROL PANEL (DCP) FOR CONTROLLING LIGHTS, RMPU ETC. FROM DRIVER DESK, CAB RECORDING EQ UIPMENT, INCLUDING TERMINATION CRIMPING LUGS, CABLE MARKERS WITH HEAT SHRINKABLE SLEEV ES FOR POWER AND CONTROL CABLES, MATING CONNECTORS, EQUIPMENT MOUNTING AND EARTHIN G HARDWARE AND ACCESSORIES AS PER CLAUSE 4.14, 4.16, 4.17 OF RDSO SPECIFICATION NO.RDSO/ PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET CONSIST OF 2 Nos. DRIVAR DESK)., as per Drawing: As per clause 4.14, 4.16, 4.17 OF RDSO Specification No. RDSO/PE/SPEC/EMU/0196-2019 (Rev.0), Packing Inst ruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOO DEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING S HALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTI ON OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHA SEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT N UMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFAC TURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHAL DT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE A S XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
AUTOMATIC SMOKE/FIRE DETECTION WITH ALARM SYSTEM FOR HS-SPIC HAVING ASPIRA TION SENSOR-BASED FIRE DETECTION TECHNOLOGY GENERALLY CONFORMING TO RDSO SPECIFICATI ON RDSO/2008/CG-04, REV.-5 (MINIMUM CRITERIA OF RDSO SPECIFICATION SHOULD BE MET). (ONE S ET PER HS-SPIC), as per Drawing: RDSO SPECIFICATION RDSO/2008/CG-04, REV.-5 (MINIMUM CRITERIA OF RDSO SPECIFICATION SHOULD BE MET), Packing Instruction: SUITABLY COVERED WITH BIODEGRAD ABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT P ACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CA RE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIR M'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINK AGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NA MEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDE R DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTUR ER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Wa rranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
AEROSOL BASED FIRE SUPPRESSION SYSTEM FOR HS-SPIC AS PER SPECIFICATION EDML 0184, TYPE-I, CORR-1 (LATEST) FOR ELECTRICAL CABINETS (DRIVER DESK, TCAS PANEL,CRW PANEL), TRACTION CONVERTER, AUXILIARY CONVERTER AND BATTERY CONVERTER. THE QUANTITY OF CONDE NSED AEROSOL-BASED SUPPRESSION SYSTEM SHALL BE BASED ON GENERAL CRITERIA OF 100GMS PE R CUBIC METER VOLUME OF THE CUBICLE (ONE SET PER HS-SPIC) EACH CONDENSED AEROSOL BASED SUPPRESSION SYSTEM COMPRISING OF: I) FIRE EXTINGUISHING GENERATOR OF MIN.100 GMS II) THER MAL SENSOR III) MOUNTING BRACKETS WITH ASSOCIATED HARDWARE., as per Drawing: EDML0184, T YPE-I, CORR-1 (LATEST), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPAREN T POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL B E ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NA ME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CA RDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFA CTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D) UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)D ELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
SET OF CYCLONIC AIR FILTERS FOR HS-SPIC AS PER CLAUSE 4.38 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), as per Drawing: AS PER CLAUSE 4.38 OF R DSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instruction: SUITABLY COVER ED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL U SED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF IT EM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OP TION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HA VING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FO R BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <M ANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.TH E QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USI NG THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
UNDERSLUNG MOUNTED LiFePo OR OF BATTERY TECHNOLOGY BATTERY WITH BATTERY MANAGEMENT SYSTEM(BMS) AND BATTERY BOX SUITABLY RATED TO CATER HS-SPIC TRACTION OPER ATION ON BATTERY MODE AT MAXIMUM SPEED OF 80 KMPH WITH A RANGE OF 100 KM. BATTERY SHAL L ALSO FEED THE EMERGENCY 110V DC LOADS (PAPIS, HEAD LIGHT, FLASHER LIGHT, TRAIN CONTROL S, FIRE DETECTION SYSTEM, EMERGENCY VENTILATION) DURING NON-AVAILABILITY OF OHE SUPPLY A S PER CLAUSE 4.46 OF RCF SPECIFICATION.EDTS-449 REV.00. PROVISION OF LINEAR HEAT DETECTOR( LHD) CABLE(UL OR EN APPROVED) AUTOMATIC FIRE AND SMOKE DETECTION SYSTEM SHALL BE MADE ON THE BATTERY BOX ALSO.(ONE SET PER HS-SPIC)., as per Drawing: AS PER CLAUSE 4.46 OF RCF SP ECIFICATION.EDTS-449 REV.00, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRAN SPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIG NEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <P ODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANU SNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHAL NO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MO DEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty P eriod: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
ON BOARD IGBT/SiC BASED BATTERY CHARGING CONVERTER/CHARGER OF SUITABLE CA PACITY SHALL BE PROVIDED(AS PER CLAUSE 4.45 OF RCF SPECIFICATION.EDTS-449 REV.00) TO BOOS T THE BATTERY VOLTAGE TO DC LINK LEVEL WHEN THE SYSTEM IS POWERED FROM THE BATTERY AN D TO CHARGE THE BATTERY FROM DC LINK WHEN THE OHE IS AVAILABLE OR THE BATTERY SOC IS BE LOW THE THRESHOLD. SHORE SUPPLY USING EXTERNAL POWER SUPPLY OF 415V, 50HZ, THREE PHAS E FOR TESTING OF AUXILIARY LOADS AND CHARGING OF TRACTION BATTERY AT STATION THROUGH S HORE SUPPLY BATTERY CHARGER OF ADEQUATE CAPACITY INTEGRATED IN ON BOARD EQUIPMENT. C OMPATIBLE PLUG SHALL ALSO BE SUPPLIED ALONG WITH THE EXTERNAL SHORE SUPPLY SOCKET. (ON E SET PER HS-SPIC), as per Drawing: AS PER CLAUSE 4.45 OF RCF SPECIFICATION.EDTS-449 REV.00, P acking Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKE D IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH P ACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CAR RY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B )PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER ( OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AV AILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
DIRECT AND INDIRECT COACH LIGHTING, DISASTER MANAGEMENT LIGHTS, LED BASED HEADLIGHT, TAIL LIGHT, MARKER LIGHTS, FLASHER LIGHTS ETC. FOR BOTH NOSE CONES INCLUDING C ONTROL SWITCHGEAR, TERMINATION CRIMPING LUGS, CABLE MARKERS WITH HEAT SHRINKABLE SLEE VES FOR POWER AND CONTROL CABLES, MATING CONNECTORS, EQUIPMENT MOUNTING AND EARTHING HARDWARE AND ACCESSORIES FOR HS-SPIC CONTROL SWITCHGEAR FOR THESE ITEMS IS C ONSIDERED INCLUSIVE AS PER CLAUSE 4.30 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2 019 (REV.0). HAND LAMP SOCKETS (110V DC) (2 NOS.), USB MOBILE CHARGING SOCKETS (32 NOS.) S HALL BE PROVIDED IN EACH HS-SPIC. (ONE SET PER HS-SPIC), as per Drawing: AS PER CLAUSE 4.30 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0) , Packing Instruction: SUITABLY COV ERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENC ILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BA TCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION T O PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING D ETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMB ER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BUL K ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUD ATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING T HE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
PNEUMATIC SYSTEM FOR HS-SPIC COMPRISING OF OIL FREE MAIN AIR COMPRESSOR WIT H INBUILT NRV/MPV & SAFETY VALVE ALONG WITH MOUNTING FRAME ASSEMBLED WITH 3 PHASE INDU CTION MOTOR, FILTERS, AND PRESSURE SWITCHES, CONTROL & AIR DRYER, FILTERS ETC. AS PER CLA USE 4.35, 4.36, 4.37 & 4.38 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ON E SET PER HS-SPIC) NOTE: QUANTITY INCLUDES 04 SET AS SPARES., as per Drawing: AS PER CLAUSE 4 .35, 4.36, 4.37 & 4.38 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing In struction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WO ODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIP TION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRM S HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A Q R CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AV AILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 14.00 Set |
| Total | 14 Set | |
COMPLETE AIR-CONDITIONING SYSTEM WITH NECESSARY EQUIPMENT SUCH AS ROOF M OUNTED PACKAGE UNIT (RMPU), CONTROL PANEL, MICRO-CONTROLLER ETC. INCLUDING TERMINATIO N CRIMPING LUGS, CABLE MARKERS WITH HEAT SHRINKABLE SLEEVES FOR POWER AND CONTROL CA BLES, MATING CONNECTORS, EQUIPMENT MOUNTING AND EARTHING HARDWARE AND ACCESSORIES AS PER CLAUSE 4.39 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET P ER HS-SPIC)(01 SET COMPRISES OF TWO RMPU, ITS CONTROLLER AND ASSOCIATED ACCESSORIES), as per Drawing: As per clause 4.39 of RDSO Specification No. RDSO/PE/SPEC/EMU/0196-2019 (Rev.0), Pac king Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED I N WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PAC KING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DE SCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PU RCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MA NUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DE LCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILA BLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of deliv ery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
POWER, CONTROL, DATA / COMMUNICATION CABLES, FIRE SURVIVAL CABLES (SURVIVAL CLASS PH30) FOR HS-SPIC AS MENTIONED IN THE RELEVANT CLAUSES INCLUDING TERMINATION CRIM PING LUGS, CABLE MARKERS WITH HEAT SHRINKABLE SLEEVES AND OTHER ACCESSORIES AS PER CLA USE 4.42 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET PER HS-SPIC )., as per Drawing: AS PER CLAUSE 4.42 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 ( REV.0)., Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE A ND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDL Y .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO, PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH E TC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MAN UNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALL AN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SH ALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after t he date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
DESIGN AND SUPPLY OF ELECTRICAL CABLE DUCTS/TRAYS/CONDUITS FOR HS-SPIC UP T O VARIOUS EQUIPMENT WITH MOUNTING AND EARTHING HARDWARE AND ASSOCIATED ACCESSORIES AS PER CLAUSE 4.42.13 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SE T PER HS-SPIC)., as per Drawing: AS PER CLAUSE 4.42.13 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/ EMU/0196-2019 (REV.0), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKA GING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, C ONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEO F THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DA TE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER < MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DE LCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 180 04 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warra nty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
EPDM & EMC TYPE CABLE GLANDS FOR HS-SPIC FOR SEALING & SHIELDING INCLUDING MOUNTING HARDWARE AND FIXING BRACKETS GENERALLY CONFORMING TO BUT NOT RESTRICTED T O RDSO SPECIFICATION NO. RDSO/2008/EL/SPEC/0067 (LATEST). (ONE SET PER HS-SPIC), as per Drawi ng: GENERALLY CONFORMING TO BUT NOT RESTRICTED TO RDSO SPECIFICATION NO. RDSO/2008/EL/S PEC/0067 (LATEST), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT PO LYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE EC O-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, O RDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DE SPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBO ARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTUR ER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQ UESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MA NULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIV ERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Month s after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
PANTOGRAPH FOR HS-SPIC WITH MOUNTING INSULATORS, PNEUMATIC CONTROL PANEL, PANTO ISOLATING COCKS INCLUDING INTERCONNECTING BUS-BARS AND ASSOCIATED HARDW ARE,CORK SHEET etc. AS PER CLAUSE 4.43 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-20 19 (REV.0). DUAL MOUNTING ARRANGEMENT SUITABLE FOR HIGH REACH PANTOGRAPH SHALL BE MA DE.(ONE SET PER HS-SPIC) NOTE: QUANTITY INCLUDES 04 SETS AS SPARES., as per Drawing: AS PER C LAUSE 4.43 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX. THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE S TENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITE M, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPT ION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AV AILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 14.00 Set |
| Total | 14 Set | |
ELECTRICALLY OPERATED WIPER SYSTEM WITH WASHER TANK FOR HS-SPIC AS PER CLA USE 4.17.1 (III) OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (TWO SET PER H S-SPIC) NOTE: QUANTITY INCLUDES 04 SETS AS SPARES., as per Drawing: AS PER CLAUSE 4.17.1 (III) O F RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0), Packing Instruction: SUITABLY CO VERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERI AL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LA BELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH N O, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PRO VIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAIL S AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER < PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITE MS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TA GS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 24.00 Set |
| Total | 24 Set | |
TRAIN COLLISION AVOIDANCE SYSTEM (TCAS) AS PER SPECIFICATION RDSO/SPN/196/20 12 VERSION 3.2 OR LATEST FOR USE IN TRAINSET. (ONE SET PER HS-SPIC)., as per Drawing: AS PER S PECIFICATION RDSO/SPN/196/2012 VERSION 3.2 OR LATEST, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USE D FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/ SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LIST ED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C) PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF TH E MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVER YCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
APC RECEIVER COMPATIBLE WITH EXISTING TRACK MAGNETS AS PER CLAUSE 4.1.1 (XX XVII) OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). (ONE SET PER HS-SPIC)., as per Drawing: AS PER CLAUSE 4.1.1 (XXXVII) OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-20 19 (REV.0), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHEN E AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIEN DLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER N O,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BO X SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MA NUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIA L NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO > E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHA LLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA S HALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Numbers |
| Total | 10 Numbers | |
3-PHASE TO SINGLE PHASE UNDERSLUNG TRANSFORMER FOR HS-SPIC OF ADEQUATE C APACITY FOR AUXILIARY LOADS (NOT LESS THAN 20 KVA RATING) GENERALLY CONFORMING BUT NOT LIMITED TO ICF SPECIFICATION NO. ICF/ELEC/160 REV-0 OR LATEST (ONE NUMBER PER HS-SPIC)., as p er Drawing: GENERALLY CONFORMING BUT NOT LIMITED TO ICF SPECIFICATION NO. ICF/ELEC/160 REV- 0 OR LATEST, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHE NE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIE NDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATC H ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD B OX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <M ANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERI AL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO > E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHA LLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA S HALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Numbers |
| Total | 10 Numbers | |
AUXILIARY SYSTEM FOR HS-SPIC COMPRISING ON BOARD IGBT/ SiC POWER MODULE BA SED AUXILIARY CONVERTER FOR AUXILIARY SUPPLIES. AUXILIARY COMPRESSOR SET COMPLETE COMP RISING OF GOVERNOR/PRESSURE SWITCH ASSEMBLY, CONTROLLER INCLUDING SAFETY VALVE, AUXILI ARY RESERVOIR, COOLER ASSEMBLY, ISOLATING COCK, FLEXIBLE HOSES, MOUNTING FRAME, AVM PA DS AND FASTENERS INCLUDING TERMINATION CRIMPING LUGS, CABLE MARKERS WITH HEAT SHRINKA BLE SLEEVES FOR POWER AND CONTROL CABLES, MATING CONNECTORS, EQUIPMENT MOUNTING AND EARTHING HARDWARE AND ACCESSORIES INCLUDING AUXILIARY MACHINES AS REQUIRED AS PER CLA USE 4.28 OF RDSO SPECIFICATION NO. RDSO/PE/SPEC/EMU/0196-2019 (REV.0). ACCESS TO CONVERTE R SHALL BE THROUGH HT INTERLOCKS WHICH SHALL BE IN SUPPLIER'S SCOPE.(ONE SET PER HS-SPIC), as per Drawing: AUXILIARY SYSTEM FOR HS-SPIC COMPRISING IGBT/ SIC POWER MODULE BASED AUXIL IARY CONVERTER FOR AUXILIARY SUPPLIES. AUXILIARY COMPRESSOR SET COMPLETE (AS PER CLAUSE 4.28.18) COMPRISING OF GOVERNOR/PRESSURE SWITCH ASSEMBLY, CONTROLLER INCLUDING SAFETY VALVE, AUXILIARY RESERVOIR, COOLER ASSEMBLY, ISOLATI, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USE D FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/ SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LIST ED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C) PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF TH E MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVER YCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
Installation and integration of all items under the scope of supply of specification for HS SPIC including preparation of cable harness, complete wiring, termination etc. and Testing and commis sioning as per relevant clauses of Schedule of Requirement of SOR. (One Set equal to one HS-SPIC). As per EDTS 449,Rev00. Note: This includes preparation of all Schematic/Harness/Wiring diagrams before installation. After testing of prototype rake, as erected drawings shall be submitted by the firm in edita ble form i.e. .prt or .stp to Electrical Design which shall be property of RCF. [ Warranty Period: 36 Mo nths after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 10.00 Set |
| Total | 10 Set | |
Design, Manufacture and Supply of Under frame cable tray fixtures/ jigs for handling / In stallation of cable tray and laying of cable harness in HS-SPIC. 1set consisting of fixtures For 1 HS-SPIC. As per EDTS 449, Rev 00 [ Warranty Period: 36 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 1.00 Set |
| Total | 1 Set | |
CAMC for HS-SPIC items viz. On-board Traction converter; Traction Motor; TCMS/VCU ;Ev ent recorder; Driver desks; Speed indicator; Control equipment; Load weighing system; Auxiliary syste m comprising on board auxiliary converter; PAPIS; Traction Battery; On board battery converter for 05 years after completion of warranty period (rate to be quoted year wise) as per the details mentioned i n relevant clauses of SOR. As per EDTS 449, [ Warranty Period: 3 years, AMC Period: 5 years, Rat e of Discounting: 10 % ] ]
Training of IR personnel at RCF and other railway works. As per EDTS 449,Rev00 ]
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SORSPIC.pdf
ATTACHMENT
SORSPIC.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .