Proposed extension LHS and RHS of the existing municipality building for Thalassery municipality Fire protection

Amount

Fire Protection Supply, installation, testing and commissioning of Main fire fighting pump of horizontal centrifugal end suction type rated for 1620 LPM 50m head high efficiency volute type with cast iron casing impeller, pump rated for sutomatic operation coupled to squirrel cage induction motor TEFC rated at 415V 50 Hz foot mounted type 40 HP, 150 RPM inclduing supply and installation of all accessories like base frame foundation bolts etc complete.

Make: KIRLOSKAR/MATHER & PLAT

JOCKEY PUMP Supply, installation, testing and commissioning of Jockey Pump mono block rated for 180 LPM at 50 M head high efficemcy 10 HP volute type with cast iron casing bornze impeller, pump rated for sutomatic operation coupled to squirrel cage induction motor totally enclosed fan colled rated at 415V 50 Hz foot mounted type , 2900 RPM inclduing supply and installation of all accessories like base frame foundation bolts etc complete.

Make: KIRLOSKAR/MATHER & PLAT

DIESEL ENGINE DRIVEN PUMP Supplying, Installation, Testing and Commissioning of Diesel Engine driven main fire pump suitable for automatic operation and consisting in all respect as required.(a)Horizontal type, end suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm.at highest and farthest outlet at specified flow of 1620 lpm at 50 m. head coupled to

43HP, 1800 RPM water cooled with radiator, Diesel engine Complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(c)M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.(d)Providing and fixing 15 mm dia GI pipe C class for fuel line as required. (e)Suitable cement concrete foundation duly plastered with antivibration pads.

PRIMING PUMP Providing Installing testing and commissioning of open well submersible mono block pump set for automatic priming operation and capable of delivering 50 ltrs per minute against a total head of 10 M complete with squirrel cage induction motor or operation on415 Volts 50 Hz 3 phase AC supply etc including providing water level controller, suitable size power and control cable from control panel etc as required (Similar to Kirlosker make Model No. KDS 112)

Make: KIRLOSKAR/MATHER & PLAT

TERRACE PUMP Supplying, Installation, Testing and Commissioning of mono block type Terrace pump suitable for automatic operation and consisting of pump of cast iron body & CI impeller with stainless steel shaft, mechanical seal and flow of 450 lpm at 20 mtr head confirming to IS 1520,5 HP SQ cage induction motor 415 volts, 3 phase 50 Hz. AC for enclosure, horizintal foot mounted typeM.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered with anti vibration pads.

CONTROL PANEL Fabrication, Supplying, Installation, Testing and Commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415 V, 3 phase, 50 Hz. AC supply with enclosure protection class IP 42 required.

(A) COMMON PANEL IN FIRE PUMP HOUSE

INCOMER (a)125 Amps. TPN

(d)Set of 3 Phase indicating lamp.

(e)Set of Al. bus bar 250Amps.

(b) Jockey pump

(c)Diesel Engine Control.

(a) 2 Pole 32 Amps MCB

PLC Control for Diesel Engine comprising:-

(ii)Indication lamp for High/Low Lub. Oil pressure, High Water Temp. and Engine ON indication.

(iv)All standard relays and accessories for automatic operation of diesel engine.

(B)PRIMING PUMP

(a)32 Amps. TPN& SFU with HRC fuses

(d)Suitable HP fully automatic DOL Starter with over load protection complete with all accessories and internal wiring required for automatic operation.

(C) SYSTEM CONTROLER Designing, Supply, Installation, Testing and commissioning of System controller to control operation of Main Electric Fire Pump, Diesel Pump, Pressurisation Pump, in sequence as per specification consisting of relays, timers, sensors, annunciation window for fault indication, complete as per specification.

Make: L & T

PANEL FOR TERRACE PUMP Supply, installation testing and commissioning of wall mounted cubicle type switch board of suitable size made out of 2 mm thick MS Sheet totally enclosed, dust and vermin proof with an additional lockable glazed door on the front and consisting of the following items i/c connections with suitable copper conductor cable, earthing, painting (red), lettering etc. as required. a)32 Amps TPN Switch fuse unit with HRC fuses - 1 No. d) DOL starter suitable for the pump set - 1 No. with ammeter, voltmeter and indication lams etc as required.

POWER CABLING Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

3 core16 sq mm with factory made clamp( Fire panel to 10 HP Motor )

3.5core50 sq mm with factory made clamp( Fire panel to 40 HP Motor )

3.5core70 sq mm with factory made clamp(MSB to Fire panel )

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required3.5 core 70 sq mm

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation90/75 mm or nearest size

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

PRIMING TANK Supply and installation of out door type PVC priming water storage tank of not less than 500 litters with supporting structure and base complete with inlet, outlet, drain, manhole and cover etc as required

ABOVE GROUND/UNDER GROUND PIPING Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

100 mm dia

100 mm dia

80 mm dia

25 mm dia

Make: TATA/JINDAL

BUTTERFLY VALVE/BALL VALVE Supplying , fixing, testing and commissioning of butterfly valve PN 1.6, bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.

100 mm dia

80 mm dia

25 mm dia (Ball Valve)

Make: KARTHAR/INTERVALVE/ADVANCE

NON RETURN VALVE Providing and fixing horizontal type cast iron double flanged Non -return valve of approved quality conforming to IS:5312 with bolts, nuts, washers, 3mm thick insertion rubber gaskets complete. as reqd.

100 mm dia

80 mm dia

25 mm dia

Make: KARTHAR/INTERVALVE/ADVANCE

HYDRANT VALVE Supplying and fixing single headed internal hydrant valve with instantaneous Stainless steel coupling of 63 mm dia with cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Make: ARIHANT/NEWAGE/ESSEL

HOSE BOX Supply, installation, testing and commissioning of weather proof hose cabinet having the size of 750x500x250mm made of 16gauge MS Sheet with PCC supports and full front front glass door and locking arrangements ssuitable to accodmmodate 2 nos 15m long hose pipes and 1 No. branch pie. The cabiner shall be painted to scarlet red colour outside and off white inside.

Make: FRINEDS

HOSE REEL Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe

Make: NEWAGE/MITRAS/JYOTHI/ARIHANT

FIRE HOSE Providing and installation of 63 mm dia,15 Mtr controlled percolating hose type- A of IS-636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve / hose pipe / branch pipe with Stainless steel male & female couplings (IS:903:1993)

Make: CRC/NEWAGE/PADMINI

BRANCH PIPE Providing and installation of Branch pipe of 63 mm dia having Stainless steel body with hexagonal head of 20mm dia nozzle conforming to IS903 with ISI mark

Make: ARIHANT/NEWAGE/ESSEL

AIR CUSSION VESSEL Supplying, Installation, Testing & Commissioning of air cushion tank ( air vessel) of continuous welded construction, fabricated out of atleast 8mm thick steel with dished ends, galvanised to IS:4736-1968 and supporting legs, 250mm dia & 1200mm high complete with necessary air release valve, safety valve, pressure gauge, flange connection to the wet riser piping with necessary piping to meet the functional requirement of the system.

PRESSURE GAUGE Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification.

Make: H GURU

PRESSURE SWITCH

PRESSURE SWITCH Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.

Make:INDFOSS/WATEE

AIR RELEASE VALVE Supply, installation, testing and commissioning of Gun metal Air Release valve 20mm dia

FIRE BRIGADE INLET Supply, installation, testing and commissioning of 4way Fire Brigade Inlet connection of 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arrangement to be connected to wet riser main.

FOOT VALVE

Supply installion testing and commisssioning of Foot valve

100 mm dia

80 mm dia

EXTINGUISHER Supply and installation of ABC type fire extinguisher of 4 kg. Capacity complete with initial charges and installation brackets.Supply and installation, testing and commissioning of DCP type fire extinguisher with 5 kg. Capacity complete with installation brackets with ISI mark IS:15222

Make: SAFEX/KANEX/BHARAT

Supply and installation, testing and commissioning of CO2 type fire extinguisher with 4.5kg. Capacity complete with installation brackets with ISI mark IS:15222

Make: SAFEX/KANEX/BHARAT

FIRE ALARM PANEL Supply, installation, testing and commissioning of Control Panel of 8 Zone complete with charger, rectifier, alarm display with all other necessary attachments with provision for Public Addressing system and battery back up .

Make: RAVEL/ASES AGNI/ASWIN

MANUAL CALL POINT Supply, installation, testing and commissioning of manual call points break glass type with hammer & chain

Make: ASES AGNI

HOOTER Supply, installation, testing and commissioning of audio alarm hooters.

Make: ASES AGNI

DETECTOR Supply, installation, testing and commissioning of Photo Electric type smoke detector dual chamber dual source with base plate as per site conditions

Make: SYSTEM SENSOR/APOLLO/SIEMENS

HEAT DETECTOR Supply, installation, testing and commissioning of Heat detector dual chamber dual source with base plate as per site conditions

Make: SYSTEM SENSOR/APOLLO/SIEMENS

BATTERY Supply and installation of 12V 7 Ah Battery for Fire alarm Panel

Make: EXIDE/PANASONIC

FRLS CABLE Supplyand installation, testing and commissioning of 2C x 1.5 Sq.mm twisted pair copper cable ISI marked with proper clamping, supports and terminations.

Make: HAVELLS/POLYCAB/VARSHA

SIGN BOARDS Supply & erection of Glow Sign Boardmade of 3mm thick PVC foam board for each floor 12" x 4" (Fire Lift, Passenger Lift, Electrical Duct, Fire Station, Main Stair, Fire Exit, Floor Display, & Pump Room).

Supply & erection of 3mm thick PVC foam board Assembly Point sign board 16" x 16"

Supply & erection of Fire Escape rout in each floor having size 12" x 16" made of 3mm thisk acrylic sheet with glass frame

FIRE NOC Fee to be remited to Fire &rercue service Department (actual amount incurred for the above items will be reimbursed on production of orignal documents)

DRAWING Preparation of fire fighting system drawing and check list as per new fire rules inlduing printing in colour, conducting fire force inspection and obtaining Final NOC from Fire Froce Department