Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.3 LAccepted-AOC DESOM BUR WUANDMERI TALUK CHEKIYAL PO ABAYAGIRI | KOZHIKODE | KERALA | 612906 | ₹2.3 L | 1 | Accepted-AOC L1 |
| 2 | Rejected-Technical NADAPURAM PRAVASI LABOUR CONTRACT CO OPERATIVE SOCIETY LTD NO 3278 P O KALLACHI THUNERI BLOCK PANCHAYAT KEZHIKODE DISTRICT | - | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | Midhunraj L1 | sukesh L2 |
|---|---|---|---|---|---|
| 1.00CONSTRUCTION OF MCF CONTAINER | |||||
| 1.00 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 15 | sqm | 32.94 ₹494.10 | 35 ₹525 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.22 | cum | 8,620.24 ₹1,861.97 | 9,000 ₹1,944 |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 2.88 | sqm | 360.41 ₹1,037.98 | 370 ₹1,065.60 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 638.17 | kg | 181.32 ₹1.2 L | 200 ₹1.3 L |
| 1.00 | OD413750/2025-2026:Providing and fixing precoated galvanised iron profile sheets(siz shape pitch of corrugation as approved by Engineer in charge 0.35mm(+0.05%) total coated thicknesswith Zinc coating 120gmsper sqm as per IS-277 in 240mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns Sheet Sheet should have ave protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seat, complete upto any pitch in horizontal/verticalor curved surface, excluding the cost of purlins, rafters, and trusses and including cutting to size and shape wherever required. | 38.4 | sqm | 470.08 ₹18,051.07 | 500 ₹19,200 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 9 | metre | 527.38 ₹4,746.42 | 550 ₹4,950 |
| 1.01 | OD440036/2025-2026:Providing and fixing GI welded mesh size 25x25 mm having 3.2 mm wire dia, including
welding to existing frames complete as per the direction of Engineer-in- charge. | 69.3 | sqm | 978.19 ₹67,788.57 | 900 ₹62,370 |
| 1.01 | 9.55.3:Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished
with necessary screws etc. complete :75x47x1.70 mm | 6 | no | 38.34 ₹230.04 | 45 ₹270 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 69.9 | sqm | 153.87 ₹10,755.51 | 190 ₹13,281 |
Tender Value
₹2.3 L
EMD Value
₹5,701
Closing Date
6 Feb 2026, 11:00 amClosed
SHEELA P R
ASSISTANT ENGINEER LID EW SECTION CHEKKIAD GP
Annual Plan CHEKKIAD GP 2025 2026 P 112 CONSTRUCTION OF MCF CONTAINER General Civil Work
2026_LSGD_831427_10
006/2025-26/AE/LIDEW/CKD
Open Tender
Civil Works - Roads
180 days
CHEKKIAD GRAMA PANCHAYATH
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹5,701
Yes
9 Mar 2026
29 Jan 2026
7 Feb 2026
29 Jan 2026
6 Feb 2026
29 Jan 2026
CONSTRUCTION OF MCF CONTAINER
2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD413750/2025-2026:Providing and fixing precoated galvanised iron profile sheets(siz shape pitch of corrugation as approved by Engineer in charge 0.35mm(+0.05%) total coated thicknesswith Zinc coating 120gmsper sqm as per IS-277 in 240mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns Sheet Sheet should have ave protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seat, complete upto any pitch in horizontal/verticalor curved surface, excluding the cost of purlins, rafters, and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD440036/2025-2026:Providing and fixing GI welded mesh size 25x25 mm having 3.2 mm wire dia, including welding to existing frames complete as per the direction of Engineer-in- charge.
9.55.3:Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete :75x47x1.70 mm
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD413779/2025-2026:providing and fixing metal name board of size 100x20 cm size for 3mm thick MS sheet including priming painting and lettering etc as per standard specifications
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1397645.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 0.44 MB
Tendernotice_3.pdf
PDF • 0.25 MB
fot.pdf
Tender Documents • 0.25 MB
preliminary.pdf
Tender Documents • 0.26 MB
affidavit.pdf
Tender Documents • 0.24 MB
viewsbd.pdf
Tender Documents • 1.81 MB
BOQ_1397645.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid