NIT NO:1010/TC/2026-27

Supply of "H" beam steel pole as per IS specifications in standard length for over head line work: "H" beam steel pole 152x152x7x12 mm standard weight 37.1 kg /metre

Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 19.10.4-7 metre to 10 metre

13 metre to 14 metre

Supplying and erection of angle/channel iron cross arms/ bracket/ other fitting of approved size and shape including drilling of holes for insulator pins, bolts and nuts etc as per specification.

Supplying and erection of 11 KV gang operated air break switch on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supplying and erection of 11 KV D.O. fuse unit on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as per specification.

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as per specification.

Supplying and erection of galvanised stay set for 33 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 33 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as per specification.

Supplying and erection of G.I wire of size 8 SWG to 4 SWG including binding etc. as per specification.

Supply and erection standard ACSR (aluminium conductor steel reinforced) confirming to IS 398-1961 of approved make at existing insulator at height upto 14m from ground level including stringing, binding with insulator, jointing wherever required, jumpering, tearing off connection etc complete etc. as per specification including clearing off obstacle if any: 20.32.2-Weasel 6/1/2.59mm dia with calculated aluminium area 31.61 sq.mm , weight 128 kg/ km (80 amps)

Rabbit 6/1/3.35mm dia with calculated aluminium area 52.88 sq.mm, weight 214 kg/ km (100 amps)

Dog 6/4.72(AL), 7/1.57(S) mm dia with calculated aluminium area 105 sq.mm , weight 394 kg/ km (248 amps)

Supplying and erection DANGER BOARD made MS sheet duly painted and maked as per IE rules and specification.

Supply and errection of following Polymer Insulator with G.I. Bolt, Nuts and Straps etc. as per specification. 20.34.2-33 KV Polymer Disc Insulator {45kN}

11 KV Pin Insulator with Pin

Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: 12.19.2-With 2 metre long GI Pipes and 25 kg back filling compound.

Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification.

Providing and making suitable CC pole collar (muffing) in Cement Concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) of size 0.4 m dia and 0.4 m height from existing CC foundation.

Erection of steel tubular or "H beam POLE STRUT in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and securing with holding clamps, bolts and nuts etc. as per specification:

Supplying and fixing of 32mm dia x 2 metre long G.I pipe (light) bracket for mounting street light fittings of all types on poles including bending the pipe to the required shape, 2 Nos 40x3mm flat iron clamps with bolts and nuts including wiring with 1.5 sq. mm W.P /PVC wire etc. as per specification.

Dismantling of stay set from the cement concrete foundation, refilling the pit upto ground level including shifting of dismantled material to department store.

Painting of following height steel tubular poles with two coat of aluminium paint of approved brand including cleaning the surface as per specification: 31.12.3-Above 8 metre and upto 10 metre

Above 12 metre and upto 14 metre

SUPPLYING & FIXING OF FOLLOWING LT LINE,11KV LINE, 33 KV LINE AND XMER ACCESSORIES

Supplying and Fixing of LT 3 phase 5 Wire Aerial Bunched Cable of Size 3X70+1x16+1x50.

SUPPLYING AND FIXING OF ACCESSORIES FOR L. T. XLPE CABLE & CONDUCTOR

Supply and Fixing End cap for 50/70 Sq.mm.

Supply and Fixing Universal distribution connector.

Supply and Fixing Cable tie (UV protected black colour) for AB Cable.

Supply and Fixing Pole Clamp.

Supply and Fixing of G.I. Eye Hook 236 mm long, 16 mm dia.

Supply and Fixing of Straight through joints.

Supply and Fixing of Service ring made of 16 mm.

Supply and Fixing of Earthing Coil for messenger wire.

Supply and Fixing of Anchor sleeve for messenger wire.

Supply and Fixing of Universal hook & Bolts & nuts.

Supplying and Fixing of Distribution box 3 phase 5 connectors along with 2 Nos. Steel Strap & Buckles. (DISTRIBUTION BOX 3 PH 4 CONNECTOR).

Supplying and fixing of Insulating Piercing connector for AB cable suitable for 95- 16 sqmm to 10-2.5 sqmm. for street light and service connection.

Supplying and fixing of Insulating Piercing connector for AB cable suitable for 95- 16 sqmm to 50-16 sqmm. cable for Distribution Box.

Supplying and fixing of Insulating Piercing connector for AB cable suitable for 95- 16 sqmm to 95-16 sqmm. for Tee connection.

Supplying and Fixing of Suspension clamp assembly (consisting of GI Pole Clamp, GI Flat type I-hook & Nylon Cable tie).

Supplying and Fixing of Anchor clamp assembly (consisting of GI Pole Clamp, GI Flat type I-hook & Nylon Cable tie).

Pre-Insulated Bimetallic crimping lugs for Transformer connector

Supplying and Fixing of I BOLT M 20X128MM THREAD PORTION 50 MM.

SUPPLYING AND FIXING MS LT 4 PIN CROSS ARM SIZE 50X50X6 MM, WEIGHING 8.650 KG INCLUDING DRILLING OF HOLES FOR INSULATOR AND CLAMPING WITH NUTS AND BOLTS BUT EXCLUDING INSULATOR, CLAMP,NUTS AND BOLTS ETC.

Supplying of Aluminium bobbin(Earth knob)

Supplying of Earthing coil (Coil of 115 turns of 50 mm dia. & 2.5 Mtrs lead of 4.0 mm GI wire) (EARTHING COIL 8SWG GI WIRE 50 MM DIA 450MM).

SUPPLYING OF FOLLOWING SINGLE CORE CABLE

SUPPLYING OF ALUMINIUM CABLE 1C 150 SQ MM UNARMOURED LT PVC.

Supply and fixing following overhead line accessories.

S/F of 16x200 mm / 16x250 mm/ 16x300mm/ 20x75 mm/ 20x90 mm/ 20x110mm/ 24x120mm/ 16x100mm/ 16x140mm/ 16x160mm.

S/F of 16x65 mm / 16x90 mm.

S/F of 12x65 mm / 12x100 mm / 16x40 mm.

S/F of 12x120 mm / 12x140 mm.

SUPPLYING & FIXING OF 11 Kv POLE ACCESSORIES

Supplying and Fixing of 11 kV MS V Cross Arm angle type 65x65x6 mm Weighing 11.48 Kg including drilling of holes for insulator and clamping with nuts and bolts but excluding insulator, clamp,nuts and bolts etc.

Supplying and Fixing of 11 kV "V" Cross Arm Cleat type 75x40 mm.

Supplying and Fixing of Transformer mounting 100 x 50 mm channel.

Supplying and Fixing of D.C.Cross arm 8' Centre 100x50 mm Channel.

Supplying and Fixing of D.C.Cross arm 4' Centre 100x50 mm Channel 2 Nos.

Supplying and Fixing of D.O. / LA Mounting channel 75x40 mm.

Supplying and Fixing of Single Pole Cut Point Fitting 100x50 mm (11 kV Cut point channel).

Side Cross Arm for 11 kV 50x50x6 mm

Side Cross Arm for 11 kV 75x40 mm channel

Supplying of 11 KV Strain hardware fittings. (Strain H/W up to Rabbit.).

LABOUR CHARGE FOR FIXING OF LT DIST. BOX HANDLING OF TRANSFORMER WITH CABLE

Labour charge for Fixing of LT distribution Box with Cable For 63/100 kVA Transformer

Labour charge for Fixing of LT distribution Box with Cable For 200 kVA/315 KVA Transformer

SUPPLYING AND FIXING OF L. T. DISTRIBUTION BOX

Supplying and Fixing of L.T. Distribution Box for 63 kVA X'mer (200 A, isolator & 6 SP MCCB of 100 A).

Supply and Fixing L.T. Distribution Box for 100 kVA X'mer (200 A, isolator & 6 SP MCCB of 200 A).

Supply and Fixing L.T. Distribution Box for 200 kVA X'mer (400 A, isolator & 6 SP MCCB of 120A).

SUPPLYING AND FIXING OF JOINTING SLEEVE FOR DIFFERENT SIZE OF ACSR CONDUCTOR/UG Cable/Covered Conducter

Supplying and Fixing of Jointing sleeves for Weasel, Squirrel & Rabbit Conductor.

Supplying and Fixing of Jointing sleeve for Dog Conductor.

SUPPLYING AND FIXING OF FOLLOWING ACCESSORIES USED IN 33 KV

Supplying and fixing of 33 kv MS V cross arm of size 75x75x6 mm weighing 25.7 kg including drilling of holes for insulator and clamping with nuts and bolts but excluding insulator, clamp,nuts and bolts etc.

Supplying of 33 KV Strain hardware fittings. (Strain H/W for Raccoon & Dog.).

Supplying and Fixing of MS Single Pole Cut Point Fitting 100x50 mm (33 kV Cut point channel).

Supplying and Fixing of 33KV top clamp (33 kV Top m.s. angle 65x65x6 mm, 5.8 kg/m with two nos. 16 mm dia hole for fixing of back clamp. and m.s. channel 100x50x6.4 mm, 65 mm long welded with angle with 20 mm dia hole for pin insulator.)

Supplying and Fixing of 33 KV 5 FEET CENTRE DC CROSS ARM (D.C.Cross arm 5' Centre 100x50 mm M.S.Channel).

Supplying and Fixing of G.I. WIRES: - Barbed wire confirming to IS:2781978

SUPPLYING AND FIXING OF POLE ACCESSORIES USED

Supplying and fixing of Strain Plate (65x8 mm) for 33 kV.

Supplying and fixing of Strain Plate (50x6 mm) for 11 kV.

Supplying and fixing of Aluminium binding wire and tape.

Supplying and fixing of M.S. Back Clamp (70 mm x 165 mm) 245 mm long 100 mm width 6 mm thick with 2 nos 18 mm dia holes for 16 mm bolts.

LABOUR CHARGE FOR DISMENTALING OF BARE CONDUCTOR AND FIXING OF LT CABLE ACCESSORIES

Labour charge for Fixing of LT Clamps complete per location including Service ring,distribution box,piercing connector etc work to be done as per REC specifications

Labour charge for Dismentling of existing Bare Conductor (Weasel) work to be done as per REC specifications

Labour charge for Dismentling of existing Bare Conductor (Rabbit) work to be done as per REC specifications

Labour charge for Shifting of existing Service cable work to be done as per REC specifications

Laying of Service cable Three Phase, 4 core- 10 sq. mm.

Shifting of Service cable (Single Phase, 2 core- 6 sq mm.) to house location

Laying of Service cable Single Phase, 2 core- 6 sq mm

SUPPLYING OF GAURDING FOR 33KV/11KV

Supplying of 33 kV Guarding Channel 100x50 mm, 2210 mm long with 6 nos 18 mm dia holes for fixing of 16 mm Eye bolt and back clamp.

Supplying of 11 kV M.S. Guarding Channel 100x50 mm 2210 mm long (1.1 MTR DPDC CROSS ARM) with 6 nos 18 mm dia holes for fixing of 16 mm Eye bolt and back clamp.

SUPPLYING AND FIXING OF JOINTING SLEEVE FOR DIFFERENT SIZE OF ACSR CONDUCTOR/UG CABLE/COVERED CONDUCTER

Labour Charges of Carpet guarding with 2 nos 2210 mm long M.S. gaurding channel 100x50 mm, 04 nos 245 mm back clamp, 4mm dia G.I. guard wire, and 4 nos I bolt 16 mm dia 236 mm long and 4 mm dia G.I. cross lacing first 750 mm from pole and then 2000 mm of specing between each other for 37.1 Kg./ Mtr., 13 Mtr. Long H-BEAM pole.

Labour Charges of Site clearance for pole shifting work like survey, tree cutting, approach clearance etc.

SUPPLYING AND LAYING 11 KV AL 3 CORE XLPE INSULATED, ARMOURED UG CABLE 3X400SQMM IN EXISTING HDPE/RCC/ HUME/ STONEWARE/ METAL PIPE, NORMAL CURRENT RATING AS PER IS 3961.

SUPPLYING AND LAYING 33 KV AL 3 CORE XLPE INSULATED, ARMOURED UG CABLE 3X400SQMM IN EXISTING HDPE/RCC/ HUME/ STONEWARE/ METAL PIPE, NORMAL CURRENT RATING AS PER IS 3961.

SUPPLYING AND LAYING G.I. PIPE 150 OD (Class B as per railway) IN NORMAL SOIL UNDER 2.5 METER DEEP FROM GROUND LEVEL USING PUSHING METHOD/HDD Technique

LABOUR CHARGE FOR JOINTING ARRANGEMENT OF 150 MM OD G.I. PIPE WITH FLANGE AND WELDING OF SAME ETC.

SUPPLYING AND LAYING GI PIPE 200 MM ID FOR CABLE SUPPORT

LABOUR CHARGE FOR Fixing of Riser pipe with clamps

Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 4mm thick anchor plate, 4 nos 24mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 19.8.1-9 metre high, dia 155mm at bottom and 90mm at top, base plate size 260x260x16mm, foundation bolts 750mm long

Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. 19.9.7-Double Over Hang 1.50 metre Long

Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 19.11.7-9 metre high

Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)

Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: 12.19.1-With 3 metre long GI Pipes and 50 kg back filling compound.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as per specification.

Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.1.1-63 mm outer dia and 50 mm Inner dia

Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.1.12-3.5 x 35 sq. mm.

3.5 x 50 sq. mm.

Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 15.23.13-3½ X 35 sq. mm (28 mm)

3½ X 50 sq. mm (32 mm)

Supplying and laying following sizes one number FRLS PVC insulated, PVC sheathed, steel armoured, copper conductor control /power cable of 1.1 KV grade in exiting PVC/ GI pipe etc as per specification and IS: 694 (2010). 15.13.2-4 x 1.5 sq. mm

Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1-Upto 300 mm deep

Providing and fixing 4 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification. 10.14.4-100 amps

Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.3-Astronomical type with year programmed

Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 7.20.1-100 amp (20x5mm)

200 amp (30x5mm)

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.24-4 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 35KA

Supply of GI PIPE POLE made of "B" class GI pipe making necessary hole for cable entry and providing earthing stud (welded at specified height) including painting with one coat of red oxide zinc chromate primer. 19.4.3-80 mm dia

Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification.

Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2-Digital type

For ammeter

Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification.

Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.9-120 watt